This was posted 10 years 1 month 11 days ago, and might be an out-dated deal.

Related
  • expired

Clarion XR2420 4 Channel SRQ-1622S 6.5” Splits SRQ1633R 6.5” 3 Way Kit $299 Shipped: 45% off RRP

10
NO1_CLARION

** WE ARE CLARION AUSTRALIA'S FIRST OFFICIAL ONLINE DEALER, ALL PRODUCTS BACKED WITH FULL CLARION WARRANTY TO CELEBRATE WE ARE OFFERING A FURTHER 5% OFF ALL CLARION SOLD THIS WEEK ON TOP OF OUR ALREADY LOW PRICES !! **

FOR MORE PACKS CHECK OUT : http://www.supercheapeverything.com/full-sytem-packs/

EACH KIT CONTAINS 1 x XR-2420 + 1 x SRQ1622S + 1 x SRQ-1633R + 1 x SONY WIRING KIT
Gold Plated RCA and Block Terminal on All XR series Amplifiers

By utilizing gold-plated RCA and block terminals, XR series amplifiers offer increased conductivity and low signal loss. Gold has an extremely low electrical resistance and low contact resistance, which helps to prevent voltage drops, noise, heating and other problems from occurring.
MOS-FET Power Amp

There’s only one way for Clarion’s source units to deliver unyielding power output and linearity: MOS-FET amplification, or Metal Oxide Semiconductor Field Effect Transistor amplification. Smaller and more efficient than conventional power supplies, a MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. This means you can crank up the volume or set it to easy listening. Either way, your sound will be crystal clear.
2-Ohm Stability

Utilizing this design for peak performance and unwavering reliability, Clarion’s amplifiers can drive lower impedance loads for increased power.
The Clarion SRQ Series

Clarions SRQ Series Multiaxial Speakers combine advanced design and performance to faithfully reproduce the full spectrum of sound. Available in various types to match your vehicle.
AMI-PP Cone Woofer for Beat-Intensive Sound

srq-top-1-1207-3.jpgClarion’s SRQ Series speakers feature woofer cones made of an Aramid-Polypropylene compound which is capable of delivering explosive lows. This AMI (Aramid/Mica Injection)-PP cone material offers a superior balance of flexibility and rigidity to faithfully reproduce powerful bass, and attractive Luster Dark Gray color.
Newly Developed “Phase Plug” Improves Vocal Directivity

Taking sound wave characteristics into consideration, the new “phase plug” srq-top-2-1207-3.jpg helps to reproduce clear vocals with superior transparency by improving the directivity of mid-range to high-range frequencies. Count on it to deliver presence-rich sound directly to the listener.
Variable Angle Structure Tweeter with Pure Soft Dome

The tweeter unit features a variable-angle construction that allows it to be tilted in any direction. It’s easy to adjust it for the ideal listening position. And since its sound emanates from a Pure Soft Dome, you get low-distortion mid-range reproduction as well. Use of neodymium magnets assure wide dynamic range response so even digital sources such as CD can be enjoyed with full extension throughout the frequency spectrum.
SRQ-1633R Product Highlights
3350 Watts Maximum Music Power
6-1/2" AMI-PP Cone Woofer
cea-sp-0.jpg3/4" Pure Soft Dome Mid-Range with Neodymium Magnet
5/16" Dome Tweeter
Powerful Strontium Magnet for Dynamic Bass Response
Grille & Mesh Included
Stamped Steel Basket for GM
CEA-2031 Speaker Rating
Maximum RMS Power: 55 watts
Impedance: 4 ohms
XR-2120 Product Highlights

High Quality Output with Premium Cosmetics.
High Quality Bi-Polar Output Transistors for Natural Sound.
Oversized Power Capacitors for Reserve Current duringTransient Peaks.
Power @ 4-Ohm : 60W × 4
Power @ 2-Ohm : 90W × 4
Bridged @ 4-Ohm : 180W × 2
Number of Channels : 4/3/2cea-2006-0.jpg
MOS-FET Power Supply
2-Ohm Stereo Stable
Selectable Bass Boost; 0/6/12dB @ 50Hz
Adjustable High/Low Pass Crossover, 30-300Hz
Gold Plated Connectors; RCA/ Speaker/ Power
Speaker Level Input : 4-Channel
Dimensions (W × H × D) (Inches) : 13.94 × 2.17 × 8.50

SRQ-1622S Product Highlights

350 Watts Maximum Music Power
6-1/2" AMI-PP Cone Woofercea-sp-0.jpg
3/4" Pure Soft Dome Tweeter with Neodymium Magnet
Phase Plug
2-Way Mounting Tweeter (Variable Angle / Surface Mounting)
Powerful Strontium Magnet for Dynamic Bass Response
Grille & Mesh Included
Stamped Steel Basket for GM
In-Line -12dB/oct Crossover Network
Maximum RMS Power: 55 watts
SONY 8 GAUGE WIRING KIT WIRING KIT CONTAINS

20ft 8 AWG power cable with O-ring terminal
3ft 8 AWG ground cable with O-ring terminal
fuse assembly with 60A fuse
All necessary hardware included for installation
2 x 20ft black RCA cable
30ft of 14 AWG speaker cable
4 AWG grommet
16ft 18 AWG black turn-on wire. ( remote)
6ft split loom tubing

Related Stores

Super Cheap Everything
Super Cheap Everything

closed Comments

  • +1

    This is a good price for a basic upgrade but there's no room for expansion later on. The amp will perfectly power the 4 speakers and nothing else, so no sub later on if you're heading in that direction. And no, I wouldn't bridge it to 2 channels and run the speakers on one and the sub on the other. Good for starters though!

    • Thank you ! we have a full range of clarion products up on the site and if your looking for something a bit higher end check out the HX series here http://www.supercheapeverything.com/brands/CLARION-HX-SERIES…

      have a great day !!

      JP

    • +3

      I wouldn't say there is no room for an upgrade. You will just need another amp. Most people will get 4 speakers and a sub and be content. It's better to run a sub off a mono amp anyway. I have this setup(2 x amp with 4 speakers to amps and sub to mono amp) and its amazing.

  • is your description or your pics wrong on your site? http://cdn2.bigcommerce.com/server5300/26cac/products/937/im… looks very much like a 2 channel amp?

    • Hi !

      Thank you for letting us know!! we have now changed over the image.

      Many thanks and have a great afternoon

      JP

  • Interested in something like this, but with 5.25" splits for the rear (there's me saying 'splits' like I know what I'm talking about).

    • umm, usually splits (separate mid/tweeter) go in the front with the mids lower down in the door and the tweeter mounted higher up in the door. "lesser" speakers (the 3 ways in this case) in the rear if you want/need some "rear fill" (little more sound from the back)

      then you just need a 10 or 12 inch sub (i prefer a pair of 10's in sealed boxes) for the low end and you will have an awesome sounding system with a fair heap of poke.

      • My factory system has splits in each door.

  • +1

    Site navigation needs work.

    • Hi !

      yes we are working on that at the moment, if you have an specific recommendations or areas you think we can improve on please let us know we are always happy any feedback customer may have on our site !

      many thanks

      JP

Login or Join to leave a comment