This was posted 5 years 10 months 18 days ago, and might be an out-dated deal.

Related
  • expired

Arlec White Double Powerpoint with USB Charger $12.45 @ Bunnings

2860
Arlec White Double Powerpoint with USB Charger $12.45 @ Bunnings
Go to Deal
altomic on 08/06/2018 - 23:02 bunnings.com.au (5948 clicks)
Last edited 18/07/2018 - 20:58 by 2 other users

Credit to Price Hipster.

Handy to have in the house,

you need a licensed electrician to install these

This Alrec double powerpoint with Dual USB charger is able to charge tablet and smartphones simultaneously at their maximum capacity. It's suitable for all commercial and residential installations.

2 USB charging ports
240V, 10A power outlet
Complied to Australia electrical safety standard

Model Name Arlec Double Powerpoint with 3.4A USB Charger
Model Number 9302B
Material Polycarbonate
Colour White
you need a licensed electrician to install these
Product Dimensions (mm) W:110 H:60 L:70
Weight 0.24kg
Commercial Yes
Indoor Use Yes
Outdoor Use No
you need a licensed electrician to install these.
Maximum Amperage (amps) 10A
Maximum Voltage (volts) 240V
Surface Mount No
you need a licensed electrician to install these
Cover Plate Included Yes
Weather Resistant No
Child Safety Outlet No
Profile Type Standard
Product Material - ABS, S/S Polycarbonate
Architrave No
Pack Size 1
Number of Outlets 2
Extra Switch No
you need a licensed electrician to install these.
Removable Covers Yes
USB Charger (Yes or NA) Yes
Specialty Powerpoint USB charger

limited stock per store. In north Bris some of the stores with stock - North Lakes, Morayfield, Stafford, Cannonhill (maybe more, only checked a few locations)

Remember — you need a licensed electrician to install these. Turning off the mains power, removing the 2 holding screws on the existing power point, undoing the 3 screws hold the wires to the back of the socket. Then attaching those wires (as colour coded) you need a licensed electrician to install these to the new USB powerpoint and then attaching back to the wall with the 2 screws and then turning on the mains power, should only be done by a licensed electrician.

Electrical & Electronics Arlec Power Socket

Related Stores

Bunnings Warehouse
Bunnings Warehouse
Marketplace

closed Comments

      • debo on 09/06/2018 - 14:33
        +1

        Bought two and there are six left. Sign does not show $12.45 price - shows $19.95 but scans out at discount. Hanging at end of aisle took me ages to spot the buggers.

  • MrBillions on 09/06/2018 - 11:25

    Had a crack at this and now my stove works again. Awesome. Thanks!

    • tunzafun001 on 09/06/2018 - 11:42
      +1

      Guessing this is a joke as I believe it's only a 10A switch. Stove could be 3x this.

  • spaceflight on 09/06/2018 - 11:25
    +1

    Thanks for the instructions, I think I should be able to do this myself

  • A fish on 09/06/2018 - 11:26
    +3

    I like changing these live, with insulated tools. Makes it more fun and the kids tv can stay on in the other room.

    • dcash on 09/06/2018 - 11:37

      Agreed. Unless you're a complete moron, it's a simple and safe two minute job, and saves having to reset clocks and suchlike.

      • ozf1 on 09/06/2018 - 15:13

        Oh My! I hope samfisher from my previous comment does not read this comment of yours… how dare you state that in an online forum!

      • GregMonarch on 09/06/2018 - 19:14
        +1

        Saves the extra power required due to the spark from turning the switch off and on again too…

        NOTE TO THE SPOILT BRAT ELECTRICIANS FROM OTHER FORUMS READING… IT'S A JOKE. GO AND COMPLAIN TO THE NANNY STATE OR BUNNINGS - NOT NAG THIS SITE.

    • [Deactivated] on 10/06/2018 - 09:11

      Someone mentioned that one would drop the tools they were using or place it across the terminals.

      I know I've dropped my tools a few times, but next thing you know they want us all to wear full electric proof suits, gloves and all.

      Nevertheless, I have -4 votes due to the comments. xD

  • bamzero on 09/06/2018 - 11:28

    Wait, so are you saying I need a licensed electrician to install?

  • [Deactivated] on 09/06/2018 - 11:29

    I know people might install themselves, but for the most part people will do the legal thing so in the end what is the point of places like Bunnings selling anything that is not DIY

    • dcash on 09/06/2018 - 11:43
      +1

      I think you've answered your own question. The reason Bunnings sells this stuff is precisely because the majority of people WILL DIY something as simple as a powerpoint. This is Australia. Nanny-stateism does not rub well with us.

      • rifter on 10/06/2018 - 08:52

        Bunnings is the drug dealer. DIY person is the drug user.
        Legit drug sellers sell to legit drug buyers.
        So why are all the compliants here today directed at the DIY person and not Bunnings.

        • altomic on 10/06/2018 - 09:23
          +4

          remember when bunnings were giving away free powerpoints?
          and then after installing them DIY, We went back to get more?
          and Bunnings said - "oh no, you have to pay for these now"

          That's how they get you hooked. they give you freebies, you try it and love it, and then you're addicted.

          I'm DIYing 5 or 6 powerpoints a day. I have a screwdriver marks on my arms!!!

  • [Deactivated] on 09/06/2018 - 11:43

    Do I need electrician to install?

    • hawkeye on 09/06/2018 - 12:26

      depends if your installing in a We'repullers forum then yes Simon the pullroom bendover dicteator would be very cross.
      I don't think there's a sparky in Australia that would call out and fit items that you've purchased they'll want to supply and fit.
      spell checker down

  • Alzori on 09/06/2018 - 11:52

    For something that's not illegal to install yourself, here's a USB power board I saw last week at Bunnings (Bayswater).

    https://files.ozbargain.com.au/upload/27207/59672/img_201806…

    • Pantagonist on 09/06/2018 - 13:06
      +2

      Then you can plug in your toaster, kettle, column heater and hair straightener into it at the same time and cause a fire legally.

      • A fish on 10/06/2018 - 10:30

        It has overload protection

        • Pantagonist on 10/06/2018 - 11:04

          So does the circuit breaker in your electricity box.

        • bargaino on 10/06/2018 - 11:44

          @Nomadesque:
          Belt and braces then. Makes your scaremongering even more ridiculous.

        • A fish on 10/06/2018 - 11:49

          @Nomadesque:
          It's set much higher. Accidentally downvoted you, sozzie.

  • OnlyFans on 09/06/2018 - 12:18
    +3

    They had none left at my local Bunnings… but the nice lady that helped me gave me these for the same price.
    https://www.bunnings.com.au/deta-x6-double-power-point-with-…

    https://imgur.com/DrInRNs

    • asa79 on 09/06/2018 - 12:42

      What price did you get for those?

      • sirob1 on 09/06/2018 - 12:43
        +2

        Ahhhh, he said 'the same price'

    • ExtraSalt on 09/06/2018 - 14:42

      Jackpot

    • GregMonarch on 09/06/2018 - 19:16

      Pretty sure the DETA stuff I looked at were as bad or worse quality as Arlec (but not certain). But… I hope know you know you need an inverter too, to install them in that car.

      • OnlyFans on 09/06/2018 - 21:04

        she'll be right mate

    • isthisreallife22 on 09/06/2018 - 19:53

      Oh that is nice

  • Timfoo on 09/06/2018 - 14:01
    -1

    Let me also add, no USB shutoff so outlet is constantly drawing around 1w, also can’t charge 2 devices at full speed. 2.1a x2 = 4.2A. This only allows 3.4a to be drawn. Looks disgraceful and will not fit in tiles or glass spalshback for direct swap of existing because of how large the back end is. Will require grinder to enlarge the tile cutouT.t. It’s a neg from me

    • mubd1234 on 09/06/2018 - 14:18
      +1

      Do you happen to be a licensed electrician?

      • ExtraSalt on 09/06/2018 - 14:43

        Well if he's not a Licensed electrician, his negative comment will be ignored.

    • sirob1 on 09/06/2018 - 14:22
      +1

      1W constant draw? Sauce?

      I can't find the arlec docs, but this clipsal one quotes 0.07w standby draw, which sounds more like it. https://www.clipsal.com/Trade/Products/Electrical-Accessorie…

      • jztilly on 09/06/2018 - 19:14

        i grabbed a couple of these today - i'll measure it tonight as im curious myself

      • GregMonarch on 09/06/2018 - 19:21
        +1

        The 1W isn't a problem money-wise. It's that the switch mode power supply - fitted inside the wall near to the internal wooden frame of your home - and constantly creating heat for years - WILL fail (and MAYBE start a fire) long before the power point fails.

        • bargaino on 10/06/2018 - 12:35
          +1

          The 1W isn't a problem money-wise.

          Its around the $12 cost of the outlet, every 5 years or so. And just plain wasteful - if true. A decent plug-in charger will draw far less when not in use.

        • eug on 10/06/2018 - 12:53
          +1

          @manic:

          A decent plug-in charger will draw far less when not in use.

          Have you actually measured how much power this Arlec draws on standby? Serious question.

        • whooah1979 on 10/06/2018 - 14:22

          @manic:

          $12 cost of the outlet, every 5 years

          $2.4 per year is peanuts for not having plugins protruding and occupying the gpo.

        • bargaino on 10/06/2018 - 15:58

          @whooah1979:

          The correct comparison is against a better designed outlet that wastes less power, and is probably more reliable.

          Anyway, the guy above probably just pulled the "1W" out of his butt.

        • eug on 10/06/2018 - 17:59
          +1

          @manic:

          Its around the $12 cost of the outlet, every 5 years or so. And just plain wasteful - if true.

          If you don't plug anything into it, based on a 23c/kWh tariff, it will cost 0.00276 cents per hour, or 0.066 cents per day, or about 24 cents per year.

        • bargaino on 10/06/2018 - 18:39

          @eug:

          Bad maths.
          1W = 1kWhr per 1000 hrs right? So 40 days. 9 units per year. Not just one, as you got.

          A quality device will use much less of course.

        • eug on 10/06/2018 - 19:28
          +1

          @manic:

          Bad maths.
          1W = 1kWhr per 1000 hrs right? So 40 days. 9 units per year. Not just one, as you got.

          Electricity cost is 23c per 1,000 watts for an hour.
          Outlet consumes 0.12 watts.

          1,000 watts for 1 hour costs 23 cents.
          1 watt for 1 hour costs 23/1000 = 0.023 cents.
          0.1 watts for 1 hour costs 0.023 / 10 = 0.0023 cents
          0.12 watts for 1 hour costs 0.023 / 8.3 = 0.0027 cents

          24 hours in a day, 8760 hours in a year.

          0.0027 cents x 8760 hours = 23.65 cents

          i.e. 0.12 watts for 1 year will cost 23.65 cents with an electricity tariff of 23c/kWh.

          A quality device will use much less of course.

          Even though I'm on OzBargain, I'll happily pay 24 cents a year for the neatness of a built-in USB charger. :)

    • eug on 10/06/2018 - 17:42
      +3

      @sr8rippinpro:

      Let me also add, no USB shutoff so outlet is constantly drawing around 1w

      I just measured one of mine and I can confirm that the 1W figure is incorrect.

      It drew 0.12W on standby. With a 3.05A load, output voltage stays steady at 5.18V (my other one was slightly higher), measured after running it for 15 minutes. Power factor is 0.47, and efficiency is 84% (18.78W input, 15.8W output).

      will not fit in tiles or glass spalshback for direct swap of existing because of how large the back end is. Will require grinder to enlarge the tile cutouT

      Just wondering, did you actually look at one?
      The back has a much smaller footprint than other designs, e.g. the Costco one posted by Fancy.

      It's deep, but depth isn't usually the problem.

      • whooah1979 on 10/06/2018 - 18:37

        Thanks for taking the time to put this myth to rest.

  • Rollins on 09/06/2018 - 14:10
    +2

    Ah Australia the land of the certified everything. Im not suggesting folks go out and do their own electrical work, especially without some basic understanding of what is involved. It amazes me the fear mongering that goes on every time its even suggested. I hope none of you ever travel outside of Australia, because imagine all the UN CERTIFIED Electrical/Plumbing/Waterproofing/Vehicle/Helmet etc etc standards you are exposing yourself too !!!

    The number of times I have had to fix licensed a tradies work…. or had to call a licensed tradie to fix that last licensed tradie…..

    Anyone who has spent time in the Mother Country would of happily changed plugs/switches/light fittings, Same in The US and many others. I dont see any mass electrocutions or a higher incident of house fires.

    Another set of industries ripe for a bit of disruption IMHO. Didnt someone go to court recently over life Jacket standards and it being anti competitive ? Same could be said for Bike/Motorbike helmets. EU/US standards should be adequate why do we need our own ?

    P.s Not a slight at any Tradies out there, but you know firsthand what im saying :)

    /EndRant

    • samfisher5986 on 09/06/2018 - 14:30
      +2

      What does the uncertified or crappy electrical work outside of Australia have to do with doing your own electrical in a house you own?

      If you are going to do electrical work do it properly and follow standards.

      The fact that there are electricians in this country that don't follow standards properly even for a simple outlet should be enough to tell the average person that its not a good idea to try unless you know how to do it correctly.

      And yes there is a right way and a wrong way to install an outlet.

      • Rollins on 09/06/2018 - 14:37
        -1

        Are you suggesting that all of the UK and US have crappy electrical work ? I find that hard to believe.

        • samfisher5986 on 09/06/2018 - 14:38

          Can't you read?

          uncertified or crappy electrical work

        • Rollins on 09/06/2018 - 14:44

          I was making the point that it seems we must continue to certify everything and anything unlike most other countries we hold near and dear.

          The fact I responded to your comment would suggest that I can read.

        • Pantagonist on 09/06/2018 - 15:05

          @Rollins:

          unlike most other countries we hold near and dear.

          And even those we don't.

    • GregMonarch on 09/06/2018 - 19:26

      The number of times I have had to fix licensed a tradies work…. or had to call a licensed tradie to fix that last licensed tradie…

      This annoys me so much. The real estate agent sends 'tradesmen' here and they do pitiful work. But when I say, "I'll fix it" the RE agent says no, charges the owner 7x the cost it would have been for me to do it PROPERLY, and causes the rent to go up. Out of the many repairs done to rentals over the last 20 years, I can only think of ONE tradesmen that did work to a reasonable standard.

  • debo on 09/06/2018 - 14:33

    Thanks OP been after these for a while.

  • Diva on 09/06/2018 - 15:10
    +1

    Wait! I will get my license first.

  • finny7 on 09/06/2018 - 16:15

    Picked up one earlier, easy to install, might go back and get a few more. Thanks OP

  • FlatulentFrank on 09/06/2018 - 17:18

    Worked/working within the electrical industry, seems there are some strong opinions without substance on here.

    Having worked and seen cases where someone wanted to save a few quid and DIY only to end up brain dead at 29 with 3 kids. Just read about a bloke losing his insurance and ending his own life from a similar thing.

    If you value your life, insurance ect. I honestly don't see the point of DIY with the associated risks. Seems quite counterproductive but hey, some people can only learn from their mistakes….with a product like this it may be permanent. just stay safe guys

    • Pantagonist on 09/06/2018 - 19:29
      +1

      Having worked and seen cases where someone wanted to save a few quid and DIY only to end up brain dead at 29 with 3 kids. Just read about a bloke losing his insurance and ending his own life from a similar thing.

      Why is it that the only information on the internet about things like this are uncited anecdotes from people on forums and not from regulators or news outlets? Where'd you read about the guy who lost his insurance and committed suicide? Was it on page 2 of this discussion by any chance?

  • ChillBro on 09/06/2018 - 17:21
    +3

    Can someone post up the free Udemy course that lets us become licensed electricians?

  • bargaino on 09/06/2018 - 18:34
    -4

    Remember,
    if electrical work was difficult, it would be done by tertiary-educated professionals, not tradies.

    • GregMonarch on 09/06/2018 - 19:34
      +4

      Um… I'm not saying tradesmen are brilliant stars either, but I've known plenty tertiary trained people who are some of the most incompetent and 'live-in-lala-land' people I've met. (And that includes solicitors and doctors.)

      And the negs aren't me.

      The only negs I recall giving lately are when I know someone has Trump Derangement Syndrome. ;-D

      • bargaino on 10/06/2018 - 00:23
        +3

        All true. Just saying you don't need to be brilliant or have years of training to to a bit of home electrical. Its not brain surgery.
        The incidence of bad jobs causing problems is far rarer than implied, and usually people who don't make any effort to do it right, or ask questions.

        Replacing a switch needs no skill beyond using a screwdriver, and some common sense. People do it every day, from every Bunnings in the country. In NZ they do it legally, though having the same AS3000 standards.

        Am sick of all the rear-mongering "it'll void your insurance". I'm more scared of crossing the road, or the Trump presidency, than changing a GPO.

        • fedupwithjunk on 11/06/2018 - 22:37
          +4

          I think the generalised criticim and jabs at 'tradie' intelligence are unfair and a little sad. I am sure we have all met a tradie who is as thick as two short planks but many are descent smart, hard working professionals.

          Having said that, almost anyone of sound mind could swap an electrical plug or socket after reading a few instructions. Despite what some 'qualified' people say, its not difficult and as pointed out - it happens every day all over the world without problems.

          Occasionally some idiot does something stupid, beyond their ability or just a simple mistake. Accidents happen, governance decides that more legislation is required. Its crap but its the law. It doesn't make the world any safer, it offers no guarantees, idiots will be idiots and accidents still happen. Trades charge $200 for a $20 job because they feel more important having had to gain a certificate for work a womble could do. The increased charges then cause more people (and probably the least able) to consider DIY because they cannot afford the 'professional'.

          Ask anyone who has done any inspection work in any industry and they will tell you that many 'professionally qualified' people still make mistakes or simply do shoddy work. If we paid people less maybe they would try harder to do a better job that justifies being paid more?

          Anyone still reading ? … Be nice :-)

  • ozzpete on 09/06/2018 - 19:43

    you need a licensed electrician to install these.

    Im thinking of checking airtasker or gumtree etc for licenced electrician.
    Is there an actual license card, that they should have with them in wallet?
    Just wondering how I can verify their authenticity as a licensed/qualified electrician before they start the job ?

    • Burnz316 on 10/06/2018 - 00:02
      +2

      Yes a licenced electrician will have a physical licence issued by Fair Trading NSW (in NSW at least).

      If they don't have one, find another one.

    • Pantagonist on 10/06/2018 - 08:19
      +2

      If hiring through Airtasker the person you assign should have an electrical badge on their profile, meaning that they've had their licence verified by the platform.

      https://support.airtasker.com/hc/en-au/articles/115009846887…

  • echelon6 on 09/06/2018 - 21:32
    +1

    I wonder what the power draw is when nothing's plugged in. The stepdown transformer for the USB might always be on. Might add up to big bucks for the expected lifetime of the socket.

    • whooah1979 on 09/06/2018 - 21:46

      a suspended usb port shouldn't consume more than 2.5ma. two ports should be no more than 5.0ma.

  • bikuta on 09/06/2018 - 22:33

    I called Seven Hills, Castle Hill and Rydalmere all sold out.

  • WesthamAreMassive on 10/06/2018 - 08:45

    Got some saved in Ellenbrook WA if anyone interested PM me

  • tristanmarsh on 10/06/2018 - 09:17
    +1

    The Future is now

  • Tony76 on 17/06/2018 - 10:21

    Pity there's no power switch to turn off the parasitic drain on the usb. Wouldn't be much I suppose.

    • eug on 17/06/2018 - 10:38

      It really isn't much, I calculated it to be about 24 cents a year.

  • Helenn on 21/06/2018 - 09:18

    Is out possible to replace a single power point with one of these?

    • eug on 21/06/2018 - 10:37

      Yes, the wiring at the back is the same.
      Of course if you run too many devices on that circuit (e.g. a kettle, a mini oven, and a microwave), your circuit breaker will trip.

  • zzymurgy on 21/06/2018 - 13:55

    I have one of these, it's a little bulkier than a standard double powerpoint so don't try installing in a solid wall.

    • eug on 21/06/2018 - 14:28

      Yeah it's much deeper than a standard power point, but the footprint is actually quite small compared to previous designs.
      Here's a photo that was posted earlier.

  • mattythecapybara on 23/06/2018 - 21:17

    Never really seen the point of integrating USB into powerpoints and powerboards, in my experience USB chargers fail often enough that I'd rather keep them as a separate unit.

    • eug on 23/06/2018 - 23:34
      +1

      Hmm, what USB chargers do you use?
      I haven't had one fail yet, and I have lots. Tronsmart, Anker, Blitzwolf, Samsung, etc, all plugged in 24/7.

      • mattythecapybara on 25/06/2018 - 09:26
        +1

        Cheaper stuff than that obviously - I've had issues with Kogan, Jackson, etc. Good to hear that certain brands are more reliable.

Login or Join to leave a comment
Login Join