Sovol SH02 Filament Dryer $87.99 Delivered @ Sovol via Amazon AU

100

Affiliate

Go to Deal

Cashback

tellhimhesdreaming on 24/10/2025 - 06:23 amazon.com.au (474 clicks)
Last edited 24/10/2025 - 06:25

This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Cheap two roll filament dryer, for getting moisture out of hygroscopic filaments and improving print quality and consistency. Recently bought two of these and they're much better than the old esun dryer I had before, but did need to print a mod for filament pathing.

If you're playing with TPU or Nylon filaments, thoroughly recommend something like this.

Price History at CamelCamelCamel.

Related Stores

Amazon AU

Marketplace

Sovol

• • 

    xins on 24/10/2025 - 07:46

    Isn't there a vent at the top for that???

    • 1
    • 

      hhuy837 on 24/10/2025 - 09:44

      Yeah there is - I got this a few months back for a similar price. It does a pretty decent job at drying.

      I am not sure what I was expecting but it isn't a very exciting machine. You click the preset or settings you want, you walk away for X hrs and you come back with dry filament. It does what it says it does I guess.

      • 0
    • 

      Ooops on 24/10/2025 - 20:25

      Yes, thanks.

      • 0
  • 

    Doughy Dave on 24/10/2025 - 18:27

    There are two spots for desiccant at the bottom. I have found this dryer quite good if not a little noisy, which doesn't bother me as it lives in my shed with my printer, but I wouldn't like it the same room as me in the house.

    • 0
• 

  Ntense on 24/10/2025 - 07:52

  There is a vent at the top. The latch can also double as a slight prop which I've found works well to drop the internal humidity.

  • 0
  • 

    Nousernamehere on 24/10/2025 - 10:39

    The latch can also double as a slight prop which I've found works well to drop the internal humidity.

    Yep I do the same with mine. Usually leave it closed for the first hour or so then pop it open even now and then and just leave it slightly propped open and the humidity stays low. Still needing to get around to this mod which helps with that as well.

    Also another mod to help with air blowing directly onto part of the filament but unsure if this one is really needed, done this for mine already anyway.

    • 2
• 

  pepsicles on 24/10/2025 - 08:43

  Do I need a dedicated filament dryer? Or can I just use the Bambulab AMS 2 Pro powered by AMS 2 Pro Switching Adapter on my P2S?

  • 0
  • 

    3dprintdeals on 24/10/2025 - 10:59

    Use your AMS 2 Pro

    • 0
  • 

    qihu on 24/10/2025 - 11:02

    FYI, AMS 2 Pro can't print and dry at samt time, if this doesn't bother you, AMS 2 pro is good enough.

    • 1
• 

  Ozico on 24/10/2025 - 10:28

  $77.99 with in app purchase discount
  https://ozb.me/o/3tvi?u=wa

  • 0
• 

  Grok on 24/10/2025 - 13:18

  I have no idea what this is and why you would need it.

  Something to do with 3D printing?

  • -2
  • 

    agravier on 24/10/2025 - 15:54

    Yes

    • 0
• 

  bigrizz on 25/10/2025 - 11:28

  The Comgrow version of this exact unit is $84.15 on eBay here.

  • 2
• 

  RocketToSpace on 28/10/2025 - 11:51

  Man someone please make a portable dryer for clothes lol. I don't care if it does 1-2 shirts/jumpers/pants/ect at one time… I'm tired of depending on a cheap basic $10 in-store clothes hanger that takes several hours/days to dry clothes.

  • 0
  • 

    tellhimhesdreaming on 28/10/2025 - 11:53

    Hair dryer perhaps? Lol

    • 1
    • 

      RocketToSpace on 28/10/2025 - 11:55

      I actually tried that once several years ago… meh.
      I know electric clothes hangers also exist too but I'm too nervous to try one of those.

      With all the mini/portable stuff coming out these days (Mostly at Kmart) someone gotta design a clothes dryer. An actual clothes dryer is like a couple of hundred and I have no where in my home to place one so a portable one would be awesome.

      • 0