Back again and same price as last time. https://www.ozbargain.com.au/node/933355
Includes:
12 x 1/4" Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm
1 x 1/4" 125mm Quick Release 60 teeth/ 6° Action Angle Ratchet
2 x 1/4" PH 2 Bits
2 x HEX Bits: 5, 6
6 x TORX Bits: 10, 15, 20, 25, 30, 40
1 x 1/4" Bit Holder with Locking Spring (1/4" Female Square)
1 x 1/4" 100mm Wobblers Extension Bar
1 x High Density Plastic Case
Not magnetic kinda pushes me back. Can be very annoying when working in a tight space if the bits slip
The bits adapter you need to twist the silver ring around, it will tighten it and then nothing falls out.
Very decent set for the price. Buying one for a mate who was jealous he missed out last time.
Got this last time for the car. Do recommend.
I want orange
Orange cost extra. Cheapest I could find was $49.
I have a couple of the black but inwant it in signature orange
There's this bigger 39 piece set in orange on sale:
https://www.totaltools.com.au/227726-bahco-1-4-drive-socket-…
@Icoloritecture: terrible set. doesnt even have a 12mm socket. if it had a 12 i would have bought it.
any recommend good deep socket set? 1/2?
Or you could pay a lot less and just buy a cheap impact one. They are still rated for impact after all so shouldn't go on you esp if you are using a standard ratchet
This set has got me out of some many jams as an electrician
I need a set covering 15-17mm
Weird that it doesn't go to 14mm
On a car anything 14mm you would use a 3/8 or more likely a 1/2.
yeh not common for 1/4" sets to go to 14. but i always look for sets that go to 14, in my head if they supply a 14, they expect me to do some mild suspension work. so usually have beefier ratchet assembly's
Yes,, most 1/4 sets only go up to 13mm.
There are three 1/4 sets that I know of that go go over 13mm.
Milwaukee 48229199 goes to 14mm but it is currently $110
Milwaukee 48229198 goes to 15mm, Has deep sockets and 3 ratchet spanners, currently $165-$185 I have this set and it is extremely well made and a joy to use
Bahco S13MC10.5 goes to 14mm, but misses the 9mm if that's important to you. Sells for $60
Milwaukee sell individual 1/4 drive sockets in 14mm and 15mm. In both deep and std. They are from $7 to $9 each,
@revheadgl: my current go to is the AMPRO T33722, tiny ratchet, has a "fits all" sockets and does anything from square, star, e-torx, spline, e-star, 8 points etc.
edit. the bit holder on the ampro set is garbage..
https://www.nightingalecc.com.au/ampro-1-4-drive-socket-and-… ($52+ postage)
so handy when you have your hand inside of a car dash trying to undo something without a bulky ratchet.
also I don't think I have ever used a 9mm socket on a car. But didn't know Milwaukee did a 15mm socket in 1/4" but then again i dont think i have ever used a 15mm socket.
@Aazn: Looks like a very useful set. I can't recall using a 15mm socket ether, Or at least anytime in the last few years.
I have this Högert set from Amazon, the sockets cover 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. I've been happy with it.
https://www.amazon.com.au/H%C3%B6gert-HT1R462-Werkzeugsatz-T…
@greencomet: i have that one and a few sidcrome sets and a couple of cheaper sets. all go to 14mm. I understand it with those bosch micro sets but any useful 1/4in socket set will go to 14mm.
Anyone else still using the freebie from years back?
Sure am. Love it. That was the best deal ever. The 10mm socket and a few screwdriver bits have gone walking. Bought my dad and brother a set a few years ago for Christmas. Brother didn't turn up, so I kept the socket set! Sucked in!
Back again and same price as last time. https://www.ozbargain.com.au/node/933355
Includes:
12 x 1/4" Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm
1 x 1/4" 125mm Quick Release 60 teeth/ 6° Action Angle Ratchet
2 x 1/4" PH 2 Bits
2 x HEX Bits: 5, 6
6 x TORX Bits: 10, 15, 20, 25, 30, 40
1 x 1/4" Bit Holder with Locking Spring (1/4" Female Square)
1 x 1/4" 100mm Wobblers Extension Bar
1 x High Density Plastic Case
Where are these made?
It's pronounced Gina
Cheena?
I'm getting error at payment
Any recommendations for an imperial set?
I bought this set, but was disappointed and got this instead https://www.ozbargain.com.au/node/940495
I returned that set, I thought it was too small imo. This Bahco set has been very useful for me.
that one has a lot less, and doesn't eve have a beloved 12mm.
IMO i think the OP is a more useful set.
I have found this to be a handy little set
Thanks OP. I don't see an ATL option. Do they require signature for standard shipping?
Sorry, can;t help there, I haven't bought from them in over a year, You may the the option via the Aus post or courier notification?
Thankyou, just bought from Alexandria.
Fyi they had plenty on shelves but stock was moving fast. Limit 2 per customer, staff was saying they opened up this morning to being inundated with orders for this, they reckon they will sell out today
This better than the bosch ones that have popped up on here every so often?
IMO, yes.
this one has less bits, also doesn't have a 12mm, which is one of the more commonly used sockets. It is $3 less, but i reckon the bits on the OP makes up the difference.
Got it last time, great little set!
I don’t even know what to use this for, but I already ordered it and picked it up.
Very happy from the last deal! Has been quite a handy pocket size set!
Great little set for bicycle maintenance if you don't need a torque wrench
roselands has a bunch of them on the shelf.
I bought one previously, I thought it was $25, but anyways…
Works well, bits/bit adapter is not magnetic, sockets fall off the extension easy, but it's a good price for a decent 1/4" drive set.