• out of stock

NZXT H3 Flow MicroATX PC Case (White or Black) & NZXT F120 RGB DUO 120mm Black Case Fan 3-Pack $79 Delivered @ Radium PCs

460
NZXT H3 Flow MicroATX PC Case (White or Black) & NZXT F120 RGB DUO 120mm Black Case Fan 3-Pack $79 Delivered @ Radium PCs
Go to Deal
AssociatedRadium PCs on 15/06/2026 - 14:22 radiumpcs.com.au (1901 clicks)
Last edited 15/06/2026 - 15:55 by 2 other users

Hi everyone,

Got a heavily discounted NZXT combo. Great starter for a PC especially if you like the NZXT aesthetic! Do have both white and black cases available however the fans only come in black.

PCPartPicker Part List

Type Item Price
Case NZXT H3 Flow MicroATX Mid Tower Case $59.00 @ Computer Alliance
Case Fan NZXT F120 RGB DUO 48.58 CFM 120 mm Fans 3-Pack $106.77 @ Amazon Australia
Prices include shipping, taxes, rebates, and discounts
Total $165.77
Generated by PCPartPicker 2026-06-15 14:17 AEST+1000

Surcharge: 0% Hello Clever, 1.38% credit/debit card, 4.52% Afteray.

Computing Case Fan Computer Case Computer Component Micro ATX NZXT

Related Stores

Radium PCs
Radium PCs

Comments

Old
Search through all the comments in this post.
  • Namidairo on 15/06/2026 - 15:12

    Case has a F120Q preinstalled in the rear, so you're getting 4 fans I suppose.

    • 0
  • tastycrayon on 15/06/2026 - 15:15

    I need an ATX deal.
    Everyone is hyping m-atx. :(

    • 1
    • Mintee on 15/06/2026 - 16:45

      I want an MATX build…. but no good ones… all rubbish

      • -2
  • kingmoron on 15/06/2026 - 15:17

    Good deal, but I dont even need this

    • -6
  • gfyc on 15/06/2026 - 15:44

    I’ve got the NZXT H3 Pro in black, cracker little case. Clean, sharp look. Easy to clean and so so easy to work on. The discounted price I’ve seen this case goes for it’s an absolute bargain.

    I was worried about size but I can assure you it fills a hell of a lot in. Really well designed. Runs cool, it lives up to the flow branding. I ran it just with just the stock NZXT 120mm as an exhaust. Temps were fine. The front allows for amazing air flow.

    I use mine as a console in the lounge running Steam Bigscreen. It’s small enough to fit on a TV cabinet not to look out of place.

    I don’t know about the NZXT fans in this deal? Mine came with their standard 120mm exhaust which I replaced. It wasn’t too loud, didn’t spin too hard. It worked.

    CPU cooler height was my first consideration. I run a Thermalright Phantom Spirit 120 Digital which fits with clearance to the glass. On the cpu cooler, 3 x Arctic Pro P12 argb 120mm in white as push pull pull.

    Re ram clearance, I run two sticks of Klevv Fit V. As its low profile, the front push 120mm doesn’t need to sit high on the cooler. I had Corsair RBG, higher profile so if you’re running that it will fit but front 120mm push with need to be seated higher to have clearance. Mine didn’t touch the glass, but you’d need to confirm your own ram height specs.

    Well onto fans… The H3 Flow fits big fans into a small form factor. So yeah, fans being dirt cheap I maxed it out. Definitely overkill but it really works well.

    Ok re intakes. The H3 Flow can fit two full size 140mm fans in the front or two 120mm. Two 120’s look pretty sad. Go 140’s. I had 2 x Arctic P14 Pro PST PWM P14 140mm as front intake. They look great from the front, like dark wind turbines! Beasts at pulling air, but when they wind up you know about it! Sounds like they’re going to take off.

    Re exhausts, I had 2 x Arctic P14 Pro PST PWM P14 140mm on the top, and another as the main rear. you can buy them in a five pack cheap.

    While you’re not meant be able to fit 3 x 120mm on the top, I replaced the 2 x 140mm with the Thermalright TLM12QR x 3 120mm. They clip together and just fit across the top. The two rear remained as reverse so act as exhaust. The front, I swapped the reverse for a standard so it became a downward intake, pushing air down into the path of the front 140’s. They all clip together so you can mix up reverse and standard direction.

    In the dedicated PSU area, I placed another Thermalright 120mm slimline fan pushing some air onto the GPU. It’s not needed. My PSU is a Corsair RM850x which fits easily.

    Re GPU, this was also a big size consideration. I did my research and am happy to say a XFX Mercury Radeon RX 9070 XT OC Magnetic Air White Edition RGB fits with clearance to the 140mm front intakes! It is a chonky boy, dominates the space but it has more than enough airflow. The PC runs cool very cool and has never even been close to overheating.

    Give this little case a look, it’s a damn good buy at the price point.

    • 11
  • sweat dreams on 15/06/2026 - 15:49

    I know it says the case supports mini itx but has anyone seen it happen? I cannot find anyone's build online.

    I am worried the mini itx motherboard is actually too small and the GPU ends up being too high up, and misaligns with the case

    • 0
    • Gotboost on 15/06/2026 - 16:11

      it will support itx no worries. Misaligns with a case lol that would never happen.

      • 1
  • saurabhgoyal93 on 15/06/2026 - 16:08

    Fantastic deal, too bad there's nothing wrong with my current case & fans….

    EDIT: Nevermind, couldn't resist, ended up ordering.

    • 2
  • Mild October on 15/06/2026 - 16:35

    Good deal I would say.

    • 0
  • Mrinsane on 15/06/2026 - 17:15

    Any deals on the white variant ? Nevermind, sold out…

    • 0
  • eugene2314 on 15/06/2026 - 18:48

    Please do an ATX deal!!

    • 0
  • kdinosaur on 15/06/2026 - 19:12

    Too bad i am a SSF fan. Very good deal.

    • 1
  • Tanvry on 15/06/2026 - 19:36

    free delivery, wow great deal

    • 0
  • PBJames on 22/06/2026 - 18:44

    Has amyone got theirs yet? Are the 3 rgb fans in the case or are they delivered separately because I only got the case

    • 0
    • dinalt on 28/06/2026 - 15:58

      Mine were in the case.

      • 1
Login or Join to leave a comment
Login Join