• out of stock

Bambu Lab X2D Dual-Nozzle 3D Printer Combo with AMS 2 Pro $1249 + Delivery ($0 NSW C&C) @ Mwave

620
Bambu Lab X2D Dual-Nozzle 3D Printer Combo with AMS 2 Pro $1249 + Delivery ($0 NSW C&C) @ MwaveAffiliate
Go to Deal
Cashback
3dprintdeals on 17/07/2026 - 15:13 mwave.com.au (1966 clicks)
Last edited 17/07/2026 - 15:19 by 1 other user
JULYSAVE100
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

MWave has the Bambu Lab X2D Combo with the AMS 2 Pro for $1,249 after coupon, with free pickup in store.

The X2D was exclused from the now finished anniversary sale so this is one of the best prices you can get it for.

P2S is also now $1149 post sale, so only $100 difference.

Best for those who can pick up, or it's around $60 delivery.

Original Coupon Deal

Surcharges: 0% bank transfer, BPAY, Afterpay, 1% for credit/debit card & Zip.

Electrical & Electronics 3D Printer 3D Printer Accessory Bambu Lab

Related Stores

Mwave Australia
Mwave Australia

Comments

Old
Search through all the comments in this post.
  • PeppaCat on 17/07/2026 - 15:17

    looks like 3d printers are much cheaper now, why?

    • 0
    • 3dprintdeals on 17/07/2026 - 15:18

      solid 3d printers have been available for a few years starting from $300.

      This X2D is a higher end model with a dual nozzle hot end, heating chamber, enclosed & AMS 2 dryer/filament feeder.

      • 2
      • PeppaCat on 17/07/2026 - 15:29

        I remember P series with AMS used to around $1400 and X series with AMS around $1900…. for now looks like they are much cheaper

        • 0
        • 3dprintdeals on 17/07/2026 - 15:40

          That was a few years ago, much more competition in the space.

          Bambu flagship H series are $2000-3000

          • 1
      • theone4u on 18/07/2026 - 19:09

        same as google, microsoft and all other devices that you have agreed to give access to…

        • 1
        • belongsinforums on 18/07/2026 - 21:44

          yes, and license open source software and punish people for trying to keep it open source

          • -1
    • xmessa on 17/07/2026 - 18:01

      It's even cheaper in China—about $740 for the P2S + AMS 2 or $730 for the X2D+ AMS 2. If it weren't for the regional restrictions, I would've bought it from China.

      • 0
      • l4nn13 on 17/07/2026 - 20:45

        Would filament be cheaper or worth getting? I can't imagine how you could region lock filament rolls

        • 0
        • Tacooo on 17/07/2026 - 21:38

          Don't give them ideas.

          • 2
        • xmessa on 18/07/2026 - 00:23

          around 22-30 rmb per 1kg, shipping is 20rmb per 1kg by sea - so that's $9-11 per kg

          • 1
      • simonjo on 18/07/2026 - 08:54

        I wouldn't recommend it. Those prices were explicitly for "China mainland model", which not only comes with a Chinese plug, it also locks to makerworld china website and accounts, and contents are often very heavily moderated (expect zero NSFW content, plus now most Chinese websites require all accounts to have an ID-verified Chinese phone number on file, even if makerworld cn doesn't require this now, it might very likely require so in the near future, since it's indeed a "content creation" site, which is very closely watched by authorities).
        And, 3d printers do break, and local warranty is important. Counting international shipping charges, I would go with Aussie model for 20% more.

        • 2
        • xmessa on 20/07/2026 - 20:28

          yes that's why i didn't get the chinese version. I am just saying the pricing in Australia isn't cheap at all.

          • 0
    • Hornpub on 17/07/2026 - 23:46

      compare to what and when?

      • 0
  • cumova on 17/07/2026 - 15:57

    I know google exists. But are there any good guides for kids to learn how to use 3d printers (not on youtube)

    • 1
    • 3dprintdeals on 17/07/2026 - 16:03

      First step it to get a printer. The rest is easy to learn as you go.

      With Bambu it's even easier to print straight from the app, no slicing on the computer needed.

      • 5
    • fruxo on 17/07/2026 - 16:05

      With bambu, you scroll through millions (?) of models on the app and just print with a single click from the same app. Not really anything to learn besides how to change filament on the printer.

      • 1
      • stuffandthat on 17/07/2026 - 16:23

        Until something goes wrong, or the print fails because the settings don't suit etc. Then it becomes fun!

        • 2
        • 3dprintdeals on 17/07/2026 - 17:01

          less likely with the profiels made for the various Bambu machines

          • 3
    • n1x on 17/07/2026 - 19:36

      I recommend learning how to use a 3d modeling software first, like Autodesk Fusion. Once you can design whatever thing you want then you can either print it on your own printer or get someone or a third party to print it for you.

      If you just get a 3d printer without any knowledge of 3d models then you are more than likely to just print available free models or buy models to print. Free models will give you plastic junk mostly. Models you design yourself will be priceless and genuinely helpful.

      • 3
      • 3dprintdeals on 17/07/2026 - 19:52

        Do both at the same time.

        Many problems are already solved by someone else.

        Not everything on makerworld is junk, just a lot of the trending models are novelties.

        • 7
  • lovebargain87 on 17/07/2026 - 16:00

    Reposting this for others to see:

    https://www.jeffgeerling.com/blog/2026/bambu-lab-abusing-ope…

    • 25
    • TINYTWREX on 18/07/2026 - 07:50

      Appreciate the share!

      Has Jeff suggested what brand to move to by "spending a little more for a printer from another company"? These Bambu printers seem to very popular on OzB - price and quality is quite attractive.

      Happy to support a more accountable open source brand to not get shafted down the line.

      • 1
  • tangcla on 17/07/2026 - 16:15

    After delivery cost to Melbourne, it's $1333. So almost same price as ordering direct from Bambu.

    • 4
    • 3dprintdeals on 17/07/2026 - 16:42

      yes, best for those in Sydney who can pick up from the Auburn store.

      • 2
      • Wiadro on 17/07/2026 - 19:35

        Auburn is a scary place

        • 3
        • 3dprintdeals on 17/07/2026 - 19:52

          Actually, I think it's Lidcombe

          • 2
  • Vladdo on 17/07/2026 - 17:40

    Hard to go past the Snapmaker U1 for the same-ish money.. I'm thoroughly enjoying mine.. no more waste going up in smoke.

    • 10
    • killingtime on 17/07/2026 - 19:48

      Exactly, in 2026 either go cheap or multitool head. These don't make sense anymore

      • 2
      • 3dprintdeals on 17/07/2026 - 19:54

        I have the U1 and still see a reason why some would go X2D.

        • workflow and existing printers
        • engineering filaments
        • mainly doing mixed filament for support material
        • heated chamber & filtration
        • 1
    • depecid on 18/07/2026 - 07:06

      After owning the bambu mini with ams, I'm not sure i would get another printer without a built in dryer.

      I love the idea about multi heads, but I'm constantly rotating spools through my sunlu dryer. Especially elegoo filament with cardboard spools, they seems to absorb moisture quicker than the bambu filament.

      • 0
  • Jimothy Wongingtons on 17/07/2026 - 18:04

    Omg should I????

    Is four 3d printers too much for 1 person? Hmm

    • 1
    • Walleee-y on 17/07/2026 - 18:33

      No such thing as too many printers…

      • 3
    • 3dprintdeals on 17/07/2026 - 18:38

      No.. print 4 times aa fast!

      Wait.. you have 3 now?

      • 2
      • Jimothy Wongingtons on 17/07/2026 - 18:40

        My old creality still there as a paper weight (works but by comparison it’s a POS). And the a1 and a1m

        • 0
    • theone4u on 18/07/2026 - 19:12

      i got one during their anniversary, then suddenly i accidentaly got another, then it happened again… the anniversary sale stopped so i had to hold back…

      • 2
    • CharlieAus on 20/07/2026 - 07:55

      I have 3, looking for the right deal for #4 but I think I'm going to wait for a 4 head.

      Have a Qidi Q2, Flashforge AD5X and a Anycubic Kobra 3. When these come up I almost jump at owning a bambu but I don't want to compromise, next one will be a everything I want in a printer printer and I don't think 2 heads will cut it.

      • 1
      • 3dprintdeals on 20/07/2026 - 10:24

        Make the jump to the Snapmaker U1.

        You could sell your Kobra 3 and keep the ACE unit for the U1 with MultiACE

        • 0
        • CharlieAus on 20/07/2026 - 11:14

          I'm still not sold on the Snapmaker and would prefer to buy it through something that has some sort of buyer protection in Australia. Still feels like 99% of what's posted is hyper paid for heh

          • 0
  • RADICALIST on 17/07/2026 - 18:29

    I think the Flashforge Creator 5 Pro is still better since it has 4 print heads?

    • 1
    • 3dprintdeals on 17/07/2026 - 18:39

      Different machines.

      Creator 5 is great for multicolour but not engineering filaments which need heater chamber and filtration etc.

      • 0
      • tsk2 on 17/07/2026 - 19:16

        Pro can be had for 1300 and does … sure there was the minor foxtrot uniform with the purge and fan intake but that appears the be sorted with some minor changes . Ams and single print head is dead unless you just want continuous single colour filament…the sovol m1d looks great and I suspect that some 3d party heating chamber and filter will come. Petg probably meets the requirements for a lot of people and is a shit tonne safer than asa or abs

        • 2
        • 3dprintdeals on 17/07/2026 - 19:18

          Multi toolhead printers are definitely the way forward. But for many the X2D is still the machine to get.

          I have A1 and U1, sometimes I still print with the A1 because it's just easier

          • 1
      • euk on 17/07/2026 - 20:02

        The 5 pro is definitely suitable for engineering filaments. I feed it PAHT/PPS-CF through a Creality pi4 dryer running at 85 degrees and despite the filament being very stiff it runs beautifully.

        These filaments cannot be run through any AMS and hence must be directly fed from a spool outside the AMS system. Due to the nature of nylon it will need to be dried as it's fed into the printer unless you're doing very short prints e.g you'd need a AMS-HT that bypasses the feed motor, but for that cost you might as well get a discounted e.g. Creality pi4 that can do 85 degrees and dry 4 filaments to this temperature at same time.

        • 2
        • 3dprintdeals on 17/07/2026 - 20:31

          Nice, waiting for eBay to stock the Creator 5 Pro.

          Exciting times

          • 0
      • RADICALIST on 17/07/2026 - 23:39

        Creator 5 Pro has chamber heater and HEPA filter. You can get the C5 Pro for $1249

        • 0
  • Sal in SA on 17/07/2026 - 18:50

    Got one during the sale.
    Amazing 3D Printer, for the price would say it is right on.
    Also got 10+ filaments during sale.

    • 0
    • 3dprintdeals on 17/07/2026 - 19:15

      What sale? X2D wasn't discounted for the anniversary sale

      • 1
      • OZBargainer in SA on 18/07/2026 - 01:54

        It was briefly on sale shortly after it was released until they realised how much of a bargain it was.

        • 0
        • theone4u on 18/07/2026 - 19:12

          how much was it on sale for?

          • 0
  • browser on 17/07/2026 - 18:51

    Thanks for sharing, very tempting.

    There's no gift card or price beat tricks to go cheaper is there? :D

    • 0
    • 3dprintdeals on 17/07/2026 - 19:16

      Best would be 10% off the list price of $1,349 so $1,214.

      And that's if Officeworks or JB has stock.

      • 0
      • Inthemix on 17/07/2026 - 19:39

        DOes JP stock the X2D? I thought it was only the P2S

        • 0
        • 3dprintdeals on 17/07/2026 - 19:54

          I think they can order it

          • 0
  • Pete Gabitas on 17/07/2026 - 19:17

    Got one. Lovely machine.

    • 3
  • sonicentropy on 17/07/2026 - 19:54

    Mostly happy with my x2d combo but issues with ptf tub dragging on glass causing print issues. I have had tons of issues with my ams2 too. Sadly my 2 x p1p are way more reliable.

    • 0
    • Heybargain on 19/07/2026 - 09:15

      3d print a riser

      • 1
  • pisoj1 on 17/07/2026 - 20:12

    Has anyone ever found a way to get an AMS2 for cheap?

    • 0
    • Vladdo on 17/07/2026 - 21:40

      Buy a printer with it and sell the printer..?

      • 0
  • SirFaffer on 17/07/2026 - 22:06

    By all means buy this, but don't expect to be printing small multicolour prints. At every colour change it'll poop out a bunch of filament to purge the old colour from the nozzle. You can quite literally end up wasting MANY TIMES as much filament as you use for the print… If you want to do a bunch of multicolour get the snapmaker u1. This is good for dual colour, or using petg supports for pla prints (and vice versa) and printing things like ASA and ABS out of the box, plus nylon etc.

    For the purposes that I bought the X2D its excellent, and I've had no problems in 250 hours of print time that weren't my own fault.

    The U1 I've just started using today and also so far so good.

    • -2
    • 3dprintdeals on 17/07/2026 - 22:13

      Yep, multicolour is not the main purpose for the X2D.

      For mixed filament support, it's great. PLA & PETG, PLA & TPU will work great and removing support is such a breeze.

      I've got the U1 as well, and I haven't done that many ful multicolour prints yet. Loading & slicing is not as smooth with orcaslicer & snap orca.

      • 2
      • cheaptech20 on 17/07/2026 - 23:41

        Is u1 beginner friendly?

        • 0
        • 3dprintdeals on 17/07/2026 - 23:47

          yes and no.

          servicing it is a pain e.g. TPU clog that requires disassembling the toolhead
          It's less automatic than a Bambu since you will have to slice it yourself, but these are things you should learn to do on any 3d printer.

          few other things to get used to with the U1 as well like the loading process.

          • 0
  • AlteredBeast on 18/07/2026 - 00:26

    Hmm should I wait for Black Friday sales for the H2D…

    • 0
    • 3dprintdeals on 18/07/2026 - 00:27

      did you not look during the Anniversary sale?

      • 0
      • AlteredBeast on 18/07/2026 - 00:31

        Yeah but didn't need it then 😅

        Hopefully also cheaper this year…but this X2D is very enticing…

        • 0
        • 3dprintdeals on 18/07/2026 - 00:46

          Always the case

          November will be here soon

          • 1
  • Talix on 18/07/2026 - 09:12

    OOS - Too late for me… 🥲

    • 0
    • 3dprintdeals on 18/07/2026 - 10:12

      Subscribe to the product so you can catch the next one.

      • 1
      • Talix on 18/07/2026 - 17:39

        Thanks for the tip 🙏

        • 0
Login or Join to leave a comment
Login Join