Bahco SL25BL 25pce 1/4" Drive Black Limited Edition Ratchet and Socket Set $19.99 + Delivery ($0 C&C/ $99 Order) @ Sydney Tools

1270
Bahco SL25BL 25pce 1/4" Drive Black Limited Edition Ratchet and Socket Set $19.99 + Delivery ($0 C&C/ $99 Order) @ Sydney Tools
Go to Deal
arch9898 on 03/10/2026 - 07:34 sydneytools.com.au (10002 clicks)
Last edited 05/10/2026 - 23:42 by 1 other user

Back again and same price as last time…. https://www.ozbargain.com.au/node/964376 and the time before… https://www.ozbargain.com.au/node/959878

Includes:

12 x 1/4" Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm
1 x 1/4" 125mm Quick Release 60 teeth/ 6° Action Angle Ratchet
2 x 1/4" PH 2 Bits
2 x HEX Bits: 5, 6
6 x TORX Bits: 10, 15, 20, 25, 30, 40
1 x 1/4" Bit Holder with Locking Spring (1/4" Female Square)
1 x 1/4" 100mm Wobblers Extension Bar
1 x High Density Plastic Case

PS: simply copy the text from the previous deal

Home & Garden Bahco Hand Tool Socket Set Socket Wrench

Related Stores

Sydney Tools
Sydney Tools

Comments

Old
Search through all the comments in this post.
  • helpdesk on 03/10/2026 - 08:40

    Nice. Ive been waiting for this deal to come back. Im in need of a small set.

    • 0
  • HardwoodTimber on 03/10/2026 - 08:52

    These are bloody awesome!

    • 0
  • dsiritz on 03/10/2026 - 09:03

    Have used mine numerous times now and it is really good quality.

    • 0
    • MasterScythe on 03/10/2026 - 09:59

      Bahco is a Snap-On sibsidiary, so not surprising.

      • 1
      • Leeroy Jenkins on 03/10/2026 - 11:42

        IMO it I was Snapon that destroyed Bahco's quality. Bahco tools were way higher quality before Snapon bought them. I think the idea is they can't be competing against Snapon Products.

        • 4
        • MasterScythe on 03/10/2026 - 18:30

          Yeah, they were common to find in mining sites and especially in rigging. Snap-On never quite made that cut.
          Still good, but when you use a ratchet as a twist tool for a steel cable and expect it to live, it's just another level, lol.

          • 1
  • HotPie on 03/10/2026 - 09:12

    Same its an awesome little set

    • 0
  • rooster7777 on 03/10/2026 - 09:37

    Same price as from same source 2 years ago… plastic case now, metal 2 tone case back then, so better then… but good price considering inflation creep.

    • 3
    • Jacuzzi on 03/10/2026 - 10:05

      Gah very sad :( Happens with absolutely everything. That's how the Law of Entropy goes, though :/

      • 1
      • rooster7777 on 03/10/2026 - 10:11

        Nothing sad about a good deal still being a good deal…. but the law of entropy?
        Corrr blimey! Did you switch lecture rooms halfway through … going from the physics stream to economics? :)

        • 1
        • Jacuzzi on 03/10/2026 - 16:50

          Ah, so just contradict and mock. Great.

          • -2
          • makeyouryear on 06/10/2026 - 21:53

            @Jacuzzi: I hear your pain but you've been here 10 years friend. Set appropriate expectations and you'll never be disappointed

            • 0
      • slipperypete on 03/10/2026 - 11:13

        Considering inflation, this is arguably a better deal. A case is just a case—the tool is still the same.

        • 1
        • Jacuzzi on 03/10/2026 - 16:51

          I feel like Sydney Tools' lawyers are here.

          • 1
        • TheRainbowLorikYEET on 04/10/2026 - 20:21

          Without a decent case, these things are very easy to lose. I think it’s about the only reason I’ve ever had to replace socket sets or Allen keys.

          • 2
    • makeyouryear on 06/10/2026 - 21:43

      I got you

      • 0
      • rooster7777 on 06/10/2026 - 21:50

        I'm seeing $340.68!!! But there is free delivery, so there's that… ahem

        • 0
        • makeyouryear on 06/10/2026 - 21:58

          Free delivery stood out as a good deal to me too. I bought a few hundred to keep by the door as a tip for food delivery drivers

          • 0
  • DeepDreamer on 03/10/2026 - 10:23

    Just checked my order history at Sydney Tools, and I bought one last time. Wonder where I put it…

    • 3
    • AdModnar on 03/10/2026 - 11:29

      you should have taken the 10mm socket out first and put that somewhere else (lost that separately)

      • 10
  • some_one_some_where on 03/10/2026 - 10:31

    All black cases are usually promotional ones, regular cases are still two colour.

    • 1
  • boonjin on 03/10/2026 - 10:47

    Thanks! Picked up one at Stafford , Qld, plenty of stock available

    • 0
  • life is suffering on 03/10/2026 - 10:58

    Is this better for 10 dollars more

    https://sydneytools.com.au/product/daytona-drsbs64-64pce-38-…

    • 0
    • revheadgl on 03/10/2026 - 11:38

      I would say not. Daytona is a home brand of Sydney Tools, as is Xtorque. If Daytona is as bad as the Xtorque bits I once tried, I would suggest running away:)

      • 3
      • backupper1 on 03/10/2026 - 11:44

        my experience with daytona sockets has been quiet good

        • 3
        • life is suffering on 03/10/2026 - 12:16

          Emergency fixes ?

          • 0
          • backupper1 on 03/10/2026 - 12:30

            @life is suffering: nope, workshop type time consuming works. not sure about specific product you linked as I purchase sockets ad-hoc.

            • 1
      • life is suffering on 03/10/2026 - 12:15

        Thanks yeah I understand quality always come into consideration at the worst time lol true test

        • 0
    • Leeroy Jenkins on 03/10/2026 - 11:46

      These are not remotely the same quality. Even the made-in-China Bahco has amazing tolerances and precision on their sockets. Daytona is close to shit tier.

      I bought a daytona 1/4 & 3/8 set before, and never again.

      When it comes to Bahco sockets, think Kincrome Lok-On, but better. Nothing in the price range can compete with Bahco AFAIK. Koken sockets have slightly better consistency but are much more expensive. That's why Snapon bought Bahco - to remove a competitor. But even after massively reducing their quality, China Bahco sockets still seem to be better than any made-in-Taiwan sockets I have including Kincrome, Tekton, Gearwrench etc.

      • 5
  • Kelpei on 03/10/2026 - 12:03

    The bit holder doesn't seem to hold the bits in very well, they tend to keep falling out while I'm using them.

    • 0
    • zonra on 03/10/2026 - 15:13

      Are you pushing bits all the way in?
      I have this set and have the opposite problem, I have to use pliers to pull bits out.

      • 0
  • bonbon on 03/10/2026 - 12:54

    this is really good quality

    • 1
  • OBH on 03/10/2026 - 13:43

    Good kit, better to use than the Bosch kit that comes up from time to time

    • 2
  • poohduck on 03/10/2026 - 16:13

    I was thinking "awesome, no imperial stuff". Then it has two PH bits. I mean that is still pretty good and not a biggy, it just amazes me why industry keeps pumping out the same wrong stuff for the market. Well, any market really, unless you're in Nth America

    • 0
    • umyeahokay on 04/10/2026 - 08:22

      Not everything uses metric fasteners

      • 0
      • Nom on 04/10/2026 - 10:51

        Almost everything does. 99% of OzBargainers won't ever touch anything else.

        But we're taking about Phillips bits here - they aren't metric or imperial sizes, they're just screw-head fittings 🤷

        • 2
    • Nom on 04/10/2026 - 11:15

      The two PH bits are screwdrivers to fit Phillips head screws - they have nothing to do with imperial or metric sizing 🤷

      • 1
  • REDRUM on 04/10/2026 - 12:57

    There are other nano/pico sets out there that include a 14mm, this sets worthless without it IMO :)

    • -1
    • Quarn on 04/10/2026 - 14:27

      What are you using a 14mm on? Genuine question, I can't recall ever using 14mm socket but have used spanner.

      • 0
      • REDRUM on 05/10/2026 - 13:14

        Sure.. Cars, motorcycles, bicycles, etc.

        I keep a Sidchrome nano socket set in each of my cars, they do 5.5 - 14mm.

        • 0
  • nevilleescort on 04/10/2026 - 14:50

    "99% of OzBargainers won't ever touch anything else." And the other 54%…

    Guess I'm in the other group who CONSTANTLY find themselves using both metric and imperial tool sizes. There's plenty of stuff around from earlier Australian equipment or coming in from the US. Even if metric items are finally in the majority, I could never manage without my full sets of imperial spanners and sockets.

    And PH bits are neither of course, they are an (incredibly common) manufacturer standard that's so widely used it's difficult to understand the objection to including a couple.

    • 1
  • TINYTWREX on 05/10/2026 - 12:19

    Got one of these under the previous deals. Whilst cheap so can't really complain, I was disappointed by quality due to expectations set from comments on here. Sure, it's good for little things and I keep it with my motorbike.

    Happier with the small kit from Aldi which offers more and feels higher quality.

    • 1
    • life is suffering on 05/10/2026 - 17:42

      Link

      • 0
    • gumbs on 05/10/2026 - 17:44

      I'm a bacho shill. I love their good stuff. But these cheap sets are complete trash.

      I need light weight tools for travel and have small 2 bahco sets (the ratchet bit driver set and this one) both are just cheap trash that don't stand up to use on site.

      Maybe their ratchets are particularly susceptible to sand and dirt which is common for my work and it's fine in a clean workshop but I didn't buy a mini set to use at home.

      Both ratchets are dead and the bit driver extender is jammed . I've substituted parts from my 15 year old teng tool mini set and it's still going strong. I guess the case and 10mm socket was worth what I paid for it….

      • 2
Login or Join to leave a comment
Login Join