Received an email with the discount code
- Refurbished — Grade A
- Windows 11 Pre-installed
- 12 Month Warranty
Received an email with the discount code
New node for what?
Proxmox cluster
Q: How many clusters do you need?
A: Yes
@Shermanpk: Just add/remove a qdevice every other node.
2 nodes? Add a qdevice. Adding a node to make 3? Drop the qdevice. A new deal on ozbargain bringing you up to four nodes that you're sure will be useful in the long run? Add the qdevice back.
My Dell Optiplex 7080 w/ Proxmox 9.1 keeps crashing randomly every week and it runs my Home Assistant, maybe I need a cluster.
AI said it was the NIC e1000e, then created a whole bunch of NIC monitoring and reseting scripts which then needed to be backed out… now we're on nmi_watchdog=1 with external logging to help analyze root cause.
Which have better ALWAYS on reliability Lenovo or Dell?
Is this correct: The Quorum Rule (50+ 1): To prevent "split-brain" data corruption, Proxmox requires a strict majority of nodes to agree on the cluster state.
In a 3-node cluster, if 1 node dies, the remaining 2 have 2/3 (66%) of the votes, so operations continue normally.
In a 2-node cluster, if 1 node dies, the survivor has only 1/2 (50%), which is not a majority. Both nodes will lose quorum, turning the cluster read-only and refusing to start VMs. To safely run 2 nodes, you must add an external lightweight voter (a QDevice, such as a Raspberry Pi).
Well done mate !
Is the 16GB RAM installed as one 16GB DDR4 SO-DIMM or two 8GB DDR4 SO-DIMMs?
most likely two sticks
32gb option for $135 seems like a deal to get 16x 2…
Thanks. Picked one up for my proxmox cluster. This will run pihole won't it? 😁
This particular model is not compatible with pihole, so when you try to fire up the LXC the actual computer catches fire
tx 4 the chukkl
Can this have win 11 pro?
It most likely has win11 pro
These are usually ex govt or business units and they'll have an oem key tied to the motherboard so loading up windows and connecting online should typically auto activate unless the original buyers specifically went to the effort to deactivate it somehow (unlikely).
But yeah should come with win11 pro typically. Good for a general use system or for your parents kinda thing.
Edit: I realised you were asking specifically if it's pro vs home kinda thing.
In which case, they're USUALLY pro, but it's not promised.
ya comes with win pro i meant that's it
Can this have
winlose 11 pro?
You must want some negs
Decent, on par with optiplex micro 7080
Been googling to find out if the Dell 7080 is better or not. Should be quite similar.
PCIE riser model 5C50W00877
Can support x8 (x16 slot)
Buy a PCIE network card and convert it into a router. Additional info here https://forums.servethehome.com/index.php?threads/lenovo-thi…
You can do this with any mini machine from the NVMe or WiFi slot, you don't need a riser -
2.5Gb https://www.aliexpress.com/item/1005006857328174.html
or 10Gb https://www.aliexpress.com/item/1005012437122516.html
Dammit, I need one of these with the port-side to be the same size as the Dell Optiplex that fits a small display port expansion port :(
I think they exist for 1Gb but not 10Gb
I have a 2.5Gb one in a micro Dell and there was a perfect size cutout (for either VGA or Serial) on the back already 👌
It's a thin ribbon, you can just route it outside of the case if necessary…
It's overkill for a router. I'm running OPNsense locally on a 6th gen with 8GB in a similar setup, and I rarely see CPU or memory usage go above 10 to 20%.
Try Zenarmor if you want to push that a little.
Wish they'd tell us whether it's 2.5in or NVME. Have bought from these guys before and they'd swapped the default factory NVME for a slower 2.5in sata drive. Wouldn't have been a big issue if I didn't want to add a 2.5in HDD.
Fked up isn't that a deal breaker ?
FWIW I ordered 3 and they were all m.2 drives
Thanks OP - bought to add to my lab
I turned one of these in to a NAS with this https://makerworld.com/en/models/1399535-thinknas-4x-hdd-nas…
Worked perfectly.
nice project!
how did you sort out the power side of things?
I've done a bunch of custom cases to mount them in racks and improve cooling, but I'm hesitant with all the cowboy power solutions I've seen connected to a few grand in storage…
i used the standard BOM from the post. With the drives powered by a powerbrick to sata power spliter. Then a normal Lenovo power brick to the computer.
I have seen people in the post use flex power supplies.
I agree it is a little jank, but I have it on a UPS to manage power going to the NAS. I don;t have that much storage 16b, and external offsite backup.
ah, yeah - I'd be more cavalier with 4tb hdds, they're still cheap and available.
I couldn't afford to replace my ssd array if it went up in smoke at this point, but it's likely pulling 50-70w more due to it's atx form factor than what your tiny does.
Judging by the parts list on that site, with lots and lots of adapters.
you need an extension cable for the nvme.
nvme to either sata or minisas
sata power cables
sata power brick.
Extra:
USB case fan adapter. if you want to add a case fan.
What software did you use for the NAS?
I use Unraid. It was easy to move my setup from another server.
I'm about to embark on moving from a HP ML10 tower server into a Dell rack mount server and I'm hoping it's as easy as everyone says.
I'm going from 6x4TB drives into 4x10TB, so I need to condense things down before I start moving.
@Morkai: Are you migrating your data? i.e. building a new Unraid server and moving data across? You should be ok, here are lots of guides on how to do it.
@bigmicka: Yeah I will be. I have a plugin currently called "Unbalance" that will condense the data that is currently spread across 5 disks (plus the parity) into 1-2 of the 4x10TB disks going into the new machine. TBH I could even run the new machine off 3x10TB and throw an extra SSD in there to keep all the container and VM data.
@Morkai: Are you saying you'll put some of the 10tb drives in the old server to copy data over internally, and then put those drives in the new server? Won't you then have issues with creating the raid pool across all the drives? Or would you dynamically add the extra drives to the 2x10tb pool to expand that pool? I'd personally just network them together and copy all the data straight into the full all disk pool over the network. Saves all that reslivering/compaction
@salem: @salem if anything, I will likely build up the new machine with 3 of those 10TB disks, keeping one drive bay free (the new machine is a 1RU rackmount with 4 bays) so I can then pull drives out of the old machine, slot them into the new, and copy data across that way. I only have a 1Gbps switch, and moving the data internally would be much faster than across the network I assume.
I'm using Unraid currently so there's no RAID building shenanigans to consider.
You can also replace the motherboard of old HP N36/40/54L's with these and a few mods. A few tutorials online.
Could you please share the tutorials? Thanks
I have 3 n36'S so was interested as well, here's a start:
https://www.hackster.io/news/liam-jackson-saves-an-old-hp-mi…
@Dolt2020: Neat idea, but darn it puts the new PC into the drive bay. I've got 2 3.5" hard drives squeezed into my N54L drive bay.
@korda: I've shoved a n100 board into my n54l to replace the motherboard. Fit easy. And in the right place. I did not need to cut out the back chassis panel. But I did before I checked it properly. Dont make that mistake! Can just feed network and power cables in through the existing holes and not have the new motherboard hard up against the back of the case. M.2 sata over SAS plug adaptor to then hook the drive bay plug (that feeds all 4 bay data) into the mobo
Why do this instead of an ordinary mid tower ATX PC? Space saving?
Space saving, lower power, free up other hardware.
I also got it for free, i found the computer in an e-waste bin.
can you share how to find a e-waste bin. I've got some e-waste and don't know how to bin them correctly
curious, which ports do those hard drive use, does this tiny machine provide so many hard drive connection ports?
They will all most likely use SATA ports - lots of people use one of the M.2 slots and turn it into SATA expansion, and just route the SATA cables out the back of the chassis
Damn son, nice work!
How loud do these get under load? Currently have a dell 7040 sff and it’s doing alright but i’m thinking of getting this to practice proxmox clustering, good investment for learning?
Should be fairly silent. Wouldn't hurt to replace paste (if that's what it uses) and a dust out.
Sff and micros aren't equivalent though and this is a T model so keep that in mind. It'll do proxmox and docker etc just fine.
For just learning? I don't really see it as an investment for that.. You'd expect to use it long term realistically
Oh i’ll still use it as my homelab, maybe move jellyfin over to finally have transcoding. Just planning to learn proxmox clusters and maybe iac for it but $300 is steep
They have older machines for cheaper -
https://www.australiancomputertraders.com.au/lenovo-thinkcen…
https://www.australiancomputertraders.com.au/hp-elitedesk-80…
With promox, can we use the existing OEM key to install the VM?
I've done that in the past yes. You can extract the OEM key in proxmox and set it as a BIOS value for the VM
Are there adapters that converts display ports to oculink or thunderbolt?
Never mind. I’m bugged.
Hmm no AV1 HW decode tho. Need 11th gen or Ryzen 6000+ for that
I have no problem decoding AV1 2160p files on an 8th gen i5.
sorry meant for streaming (on the receiving end) and stuff, just thinking about Steam Remote Play's Pyrowave codec
Would this be good to install Batocera on and play retro games on?
Absolutely. I've custom installed Batocera onto a Rock 4C+ SBC, which sports an RK3399 processor. IIRC, it handled up to PS1 emulation perfectly. After that, mixed results (PSP, N64, Dreamcast). Otherwise system ran like a breeze.
Spec for spec, the Intel wipes the floor handily with the RK3399.
Cheers.
I'm thinking Super Nintendo or N64 at most.
Up to PS2/Gamecube. Yep.
Awesome. Thinking up to N64, so that works out great.
Great timing, was looking for a mini PC to replace my parents' Intel NUC.
This is exactly what I needed at a great price. CPU is two generations newer, double the RAM they had, and an SSD instead of a HDD (their NUC uses about 100GB on the HDD so 256Gb is ample).
Also more USB ports at the rear than the Dell Optiplex for a USB to 3.5mm adapter and also a HDMI port saving me from having to buy a display port to HDMI adapter.
Fingers crossed this thing lasts at least 5yrs like the NUC.
I reckon as long as it runs well when you get it. It'll be fine for years.
Ultimately by 5 years time some Linux alternatives will be so close to Windows it'd be worth cutting them over lol. That's my eventual plan. Like zephyr is designed to be pretty close to Windows.. And if everything is just browser based or webapp it'd be easy to swap.
The problem is usually bloody printers ha.
Thanks OP. Grabbed 1.
Mandatory question if this is good for a local LLM
Can it run gta vi?
@jv can you please take this one mate ?
Thanks OP. Grabbed 2 for homelab use - great price.
If using Windows on these - would you do a fresh install just in case?
absolutely, takes half an hour for a piece of mind.
How would this compare to a HP EliteDesk 800 G6 Desktop Mini i7-10700T, 64GB RAM, 512GB SSD, Win11Pro
That HP is much better overall machine.
HP stats are definitely better!
is there any offer on that HP machine somewhere?
Care to link?
I bought it on ebay a few months ago but I was just asking as it's a covid-era machine I think. It was also $299 but I replaced the 16GB RAM with 64GB I found on gumtree for $80, so $380 machine. I'm using it now as an experimental box for AI harnesses. It's too slow for any local AI, even light 8B variants. So I use cloud LLMs and it works a treat.
This is covid era as well. i5-10500T was released in 2020.
I asked via instagram if there is a code for the same price on Ebay ( as I have some credit) have not got a response yet
Anyone use these for gaming?
Minesweeper, yes
I'm a solitaire man myself.
(ski free and space cadet will also get a play if available)
FWIW, I installed Torchlight 2 on my parents' Intel NUC… CPU was 2 generations older than this one, only had 8GB RAM and it had a HDD instead of SSD.
Ran OK 5yrs ago… not sure now with Win11.
I would still get something with a proper GPU for gaming.
With a graphics card installed, sure. Plenty of videos of people using Lenovo tiny's with single slot, low profile GPUs in the pcie sloe and gaming on them. Example with an older gen lenovo here: https://www.youtube.com/watch?v=ghPnTIneG3U&pp=ygUSbGVub3ZvI…
Unfortunately the single slot low profile GPUs are both very slow and very expensive.
If you want to add a gaming GPU to an ex-corporate machine like this, then buy one in the Mini Tower form factor so that you can just add a "normal" GPU. You'll get significantly more performance for your money 👍
267 Available Currently
How to check?
Cheers I was looking for an extra one of these M90q for a new node