How Do I Take out The USB Cable from The Powerbank?

mhs m0nk3y on 24/02/2022 - 20:40
Last edited 24/02/2022 - 23:11 by 1 other user

Got this Cygnett powerbank

It has an integrated USBC cable in the side of it, but I cant take it out.

Any ideas?

Electrical & Electronics Cygnett Power Bank

Comments

  • John Kimble on 24/02/2022 - 20:49
    +1

    Fingernails? Tweezers? Ruler? Blunt/butter knife?

    • pjetson on 24/02/2022 - 21:48
      +3

      Telekinesis?

  • Caped Baldy on 24/02/2022 - 21:54
    +1

    Looks like can pry one end then pull it through

  • AndyC1 on 24/02/2022 - 22:00

    Side cutters, dremel tool and go for it.

  • Qazxswec on 24/02/2022 - 22:13
    +2

    Have you tried turning your modem off for 30 seconds then rebooting it?

  • Typical16-bitEnjoyer on 24/02/2022 - 22:15
    +1

    Tie one end of the powerbank to a power pole. Tie the integrated cable to your car. Jump in and stomp on the accelerator pedal.////////

  • John Kimble on 24/02/2022 - 22:20
    +3

    The fingers you are trying with are too fat…to obtain a special prying wand, please mash the powerbank with your palm now.

  • Butt Scratcher on 24/02/2022 - 23:35

    Have you tried using a hammer?

  • plmko on 24/02/2022 - 23:40

    Just close your eyes and imagine you're on a magical journey to see the Wizard of Oz.

  • Davo1111 on 25/02/2022 - 01:27

    its permanent, sorry

  • raptormesh on 25/02/2022 - 01:50

    Jackhammer.

  • Haydos90 on 25/02/2022 - 06:48
    +8

    I have this powerbank, the way I do it is by pushing down on one end of the cable (right at the very end, on the silver bit with a fingernail if possible), and sliding it towards the other end so the middle of the cable pops out.

    • mhs m0nk3y on 25/02/2022 - 08:31
      +2

      thank you - this worked.

      finally a decent reply.

      • Qazxswec on 25/02/2022 - 10:03
        +1

        But did you even try resetting you modem?

      • John Kimble on 25/02/2022 - 10:20
        +1

        Sounds like they make it tough on purpose to reduce the chance of it falling out and being lost. 👍

  • pjetson on 25/02/2022 - 12:02

    If you take the cable out, it won't be integrated any more!

Login or Join to leave a comment
Login Join