Hi all I need a good cheap tilted wall mount for a Hisense TV that 65P7 65" size.
can anyone suggest me a really good strong cheap one if anyone knows any?
Some info
Width (mm): 1450
Depth (mm): 376
Height (mm): 921
VESA Wall Mount Size (mm): 400 x 200
Weight with stand (without stand): 27.3kg (26.3kg)
So confused need some help
you cant tilt the tv though with that?
also how well is it holding up? easy ti use and install?
No tilt. It hold tv very well. Wall base is quite long you can put all four screws into studs if you have stud centre upto 450mm.
no idea where you're located, but if you're in Melbourne I would go to https://www.selby.com.au
also, you really don't want to cheap out on a wall mount or "bye bye wall" and "bye bye tv"
as long as your TV is
This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 920mm wide.
- At least 510mm tall.
The four threaded mounting holes on the back of your TV need to be:
- No more than 880mm apart side to side.
- No more than 480mm apart top to bottom.
Maximum TV weight capacity is 100kg.
also, it only tilts 15 degrees
im not sure what the tv has lol
I third Selby. Bought 3 from there and they are strong and inexpensive.
Which ones?
One to be very low profile as the position is easily seen from the side for a 55": https://www.selby.com.au/42-70in-plasma-wall-mount-black-plb…
One Tilt bracket for a 55" because it went in my kids play room. So It tilts a few degrees downward. But because its a tilt bracket, its less low profile but doesnt matter in that position: https://www.selby.com.au/brackets-and-wall-mounts/lcd-led-pl…
One corner full motion mount for a 40" in the bedroom. Needs to point down and sideways. Only 1 stud was accessible so one that works on a single stud: https://www.selby.com.au/brackets-and-wall-mounts/lcd-led-pl…
Very happy with all three. All under $50, very high quality, very solid. Not worried about it dropping the TV or ripping out of the wall.
The first two were also lockable, which is important with toddlers around.
The wall mounts do not generally fail.
Missing the studs on the other hand… Or not even knowing about them…
Or using dry wall anchors for the wall mount -.-'
(I've seen all three).
Sadly no xD
I’ve used 2 Selby slim tilt adjustable wall mounts for years & no issues. One is an old (~10yrs) heavy 37” LCD; the other a slightly less old (~6yrs) 59” Plasma.
I bought this last week for 65 inch.
https://www.target.com.au/p/target-fixed-tv-wall-mount-mediu…