Bambu Lab H2D Released

BewareOfThe Dog on 26/03/2025 - 19:15
Last edited 26/03/2025 - 19:56

Bambu have just released a new High End Device, and it's capabilities are Mind Blowing.
It can now be capable of:-
* being a Pen Plotter
* being a 'Cricut' Vinyl Plotter
* being a Laser Cutter.

It also now has :-
* 2 (easy to change) Hotends (like the A1 series)
* a new AMS system, that dries filament
* 4 cameras
* a much larger build plate (350x320x325)
* an Air Purifier

Here are a few videos:-
Adam Savage
Ricky Impey
3D Printing Nerd

For the first batch, there is a temporary purchase limit of one machine per customer.

  • Basic H2D - available June $2999AU
  • Basic H2D with AMS- shipping soon/now? $3499AU
  • H2D with AMS + 10W Laser - ETD: Ship around April 25, 2025 $4499AU
  • H2D with AMS + 40W Laser - ETD: Ship around April 25, 2025 $5499AU

Please note there is a fume extractor (for laser curring) mentioned in one of the videos that appears to be an optional extra, but no mention of the price.

Electrical & Electronics 3D Printer Bambu Lab

Comments

  • Jimothy Wongingtons on 26/03/2025 - 19:18

    from au $2999 … 😭

    • BewareOfThe Dog on 26/03/2025 - 19:24
      -1

      You know you want one, Bro. ;)

      • Jimothy Wongingtons on 26/03/2025 - 19:25

        It looks pretty fun yeah but might just get a cricut and a laser cutter separately 😭

    • hasher22 on 26/03/2025 - 23:03

      You can get $15 off when you spend over $150 tho

  • BewareOfThe Dog on 26/03/2025 - 19:27

    I am just watching the 3D printing Nerd video, and the width may only be 325mm, unless you have 2 x AMS setup. This is due to the left nozzle going all the way to the right and vice versa.

  • ScottyDont on 26/03/2025 - 19:27

    That laser cutter is going to make a mess of the insides, though not sure how it will impact prints except how dirty the rails get

    • BewareOfThe Dog on 26/03/2025 - 19:29

      They reccommend cleaning after each use.

      • Jimothy Wongingtons on 26/03/2025 - 19:58

        I don’t think I’ve cleaned my build plate for a1 or a1m for at least 6 months, been going extremely well, at this rate it almost seems bad luck to wash it…

        • BewareOfThe Dog on 26/03/2025 - 20:19
          +1

          I received my A1 Mini last week.

          I've had a few issues, but that is probably due to cheap Filament, or humidity.

          I Already have a P1S (my severance pay from Gerry), which has copped a great deal of use. If it jams, it's a pain to clean, unclog etc Far easier than a Resin unit or the Kingroon KP5L (that I put out for council pickup)

          • Jimothy Wongingtons on 26/03/2025 - 20:24

            @BewareOfThe Dog: I specifically bought the a1 and a1m because it’s extremely easy to service lol - but knock on wood it’s actually been very good no dramas

            • BewareOfThe Dog on 26/03/2025 - 21:00
              +1

              @Jimothy Wongingtons: I wish the a1 mini was available when i 1st started.
              Its my 5th printer.
              Lesson learned.
              The p1s is awesome though.

    • simmy on 26/03/2025 - 21:01
      +1

      https://www.reddit.com/r/BambuLab/s/CFpS0TESEX

      First photo response is interesting

Login or Join to leave a comment
Login Join