Limbot » user profile

Member Since 20/12/2018
Last Seen Online Now
Badges 4 3

Recent Activities

Can still get 4GX dongles from Coles and Woolworths though don't forget they may be locked to telco on purchase.
09/07/2025 - 15:14
As easy as connecting from a LAN port on your source router to the WAN port of the Marble, logging into the Marble and then going to…
09/07/2025 - 13:40
Yes it could but it's bigger than your normal travel router (155 x 120 x 23mm )
09/07/2025 - 10:39
Assuming you're currently connecting directly to the landlord's Wifi, I'd be more inclined to run this in router mode and create your own…
09/07/2025 - 10:37
I just ordered and then noticed the Free Item banner. If you use this you get a free accessory kit (bags, filters, rollers). I've sent a…
20/06/2025 - 21:22
Put your address in here: https://www.nbnco.com.au/ and tell us the results. This will allow people to establish if you need a modem or not.
20/06/2025 - 13:44
Been running a Draytek Vigor 130
20/06/2025 - 03:49
There's generally two ways to setup: 1. Setup the router and connect to the public wifi. Connect your device to the travel router…
19/06/2025 - 13:44
Quick thoughts: 1. Create your own subnet with a firewall between your devices and any other devices on the public wifi 2. Own subnet means…
19/06/2025 - 10:02
Can connect to Internet via ethernet, WiFi, tethered phone, 4/5G dongle. Live ethernet port sometimes found plugged into the TV for IPTV…
19/06/2025 - 10:00
It's on the left hand side of the unit.
18/06/2025 - 08:55
Funnily enough the contractors started prepping for fibre down my street last week. That's the good news.... The bad news, they decided to…
11/06/2025 - 10:16
Having beta tested the Flint 3 here's my take and as always YMMV!!! : 1. **Flint 2** if you: Only have up to WiFi 6 devices Want a tried…
10/06/2025 - 13:24
Has anyone else had the problem that none of the supplied ear tips actually work? All too small or shallow or something. Luckily I have a…
04/06/2025 - 20:16
Yep, Hobart next day is almost unheard of. More likely 1-2 weeks to get things from the "big island"/"mainland" :P
04/06/2025 - 15:34
Normally once I've tested new Gl.Inet gear and made sure it's stable it will replace my primary router, so have gone from Convexa to Velica…
03/06/2025 - 18:28
Been part of the Flint 3 trials and to be honest (and if the Gl.Inet guys catch me I never said this... :P ), unless you have a lot of…
03/06/2025 - 16:03
I still carry a USB150 with me in my EDC IT kit for those just in case momemts......Thumbstick sized... Is it powerful? Nope. Is it useful…
03/06/2025 - 14:49
1. Yes. Either via ethernet cable (Access Point) or wirelessly (extender) , though note that under extender you'll lose half your…
03/06/2025 - 14:40
Just bought Liberty 4 NC a couple of months ago. Find them really good. I've just purchased the Pixel Buds to replace my Space A40s (2022)…
03/06/2025 - 12:23
https://github.com/KieronQuinn/uTag
29/05/2025 - 17:58
You could run it in extender mode.
14/05/2025 - 20:46
If you're sharing with other people worth setting up SQM. 😊
03/05/2025 - 14:13
Worth remember too however that' you'll lose some bandwidth. My FTTN without SQM approx 80Mbps, with SQM approx 70Mbps but it's worth it…
01/05/2025 - 14:39
No additional modem required, just the router.
01/05/2025 - 14:38
Loading...