EDBTZ » user profile

Member Since 11/05/2023
Last Seen 25/06/2023

Recent Activities

Hey Mate FYI ordered the 6400 and got M-Die .. not a deal breaker for me anyways :)
01/06/2023 - 09:25
You'll need to get the ones that are compatiable for AMD not Intel
01/06/2023 - 09:23
Yeah goodwill just had a look at the Ram Modules as i got them a week and a half ago and not really paid attention only to realise they are…
01/06/2023 - 09:22
FYI ... To get a Hynix Based Chip(M or A), get a set of RAM that's 6000+, timing looks like X-Y-Y, where X<Y. good example: 6000…
23/05/2023 - 10:10
looks like a CL32-38-38-96 so should be fine
22/05/2023 - 21:42
Hi All, i'd looked at some reviews and the following stood out to me: Razer Kraken V3 X Corsair Virtuoso RGB Wireless High Fidelity Gaming…
17/05/2023 - 19:52
im still need to pick up my parts and waiting on ram to ship but will be using it on a i5-13600KF This is my build as my budget was $3500…
15/05/2023 - 19:12
Yep but dont forget you have currency conversion etc. which that would go up but Still decent especially for C32 and A-Die
15/05/2023 - 11:35
I just bought these recently, these are def A-Die and only paid 219 for this 2 days ago. This is definitely good especially if your running…
14/05/2023 - 21:18
guy did a build with a TUF 4080 with the same 4000d airflow case, have a look at 16.30…
12/05/2023 - 13:11
Thanks, i've just ordered it, thanks for the heads up So now what i've just have to do is change the board to this and i should be sweet?…
12/05/2023 - 11:58
i was refering to this one https://www.amazon.com/dp/B0BNYWFC91 latency is 6400 CL32-39-39-102 sorry and after tax is AUD 219.45
12/05/2023 - 11:48
So this i assume would be M Die then?…
12/05/2023 - 11:36
im still confused but maybe you can share some guidance with me. So lets say i decide to go with this board…
12/05/2023 - 11:28
Thanks for the tip mate, i might go down to this board instead…
12/05/2023 - 10:22
Can you share your reasons why i would go for a higher mhz such as 6000CL30 or 6400CL32, sorry im knew to this and why i would i undervolt…
12/05/2023 - 09:44
what do you suggest instead?
12/05/2023 - 09:33
Thanks nomoneynoproblems and jk82, i've checked a few build sites and confirmed that there isnt any incompatiable issues. problem is that i…
12/05/2023 - 09:32
so lets say i buy a 4k monitor next month, run Diablo or MW2 on max settings. i wont see any addtional improvement as such ?
11/05/2023 - 14:13
thanks for the tip man, makes perfect sense. One last thing, is it worth going up to an i7 13700 or just stick with an i5 13600. i dont…
11/05/2023 - 14:03
The one thing that is really shitting me now is the below https://www.youtube.com/watch?v=i2_xTUshy94&t=293s&ab_channel=GamersNexus Between…
11/05/2023 - 13:09
Yeah im getting the GPU for $1799, i've been keeping an eye out on static ice. thing is over the next 3 to 4 months if it drops by $100 or…
11/05/2023 - 12:33
i have a WD Black 500GB NVME that is sitting at home so that was going to go to the OS + a samsung sata SSD which i was just going to…
11/05/2023 - 11:46
Thanks mate, yeah it is the 4000D airflow model, regarding resolution it will be either cause i have the C1 Oled TV and i have the ultra…
11/05/2023 - 11:36
its a new build for gaming really and main part of it is diablo and want to get the most out it but idealy i want to know if this is going…
11/05/2023 - 11:06
I'm currently building a PC from Scatch, getting mixed reviews but just want to make sure before I pull the trigger, below is the setup…
11/05/2023 - 10:56
EDBTZ joined OzBargain.
Welcome aboard!
11/05/2023 - 10:35