dassaur » user profile

Member Since 03/10/2011
Last Seen 3 hours 15 min
Badges 3
Location sydney

Recent Activities

It was about 2.2k The issue is under SEVS (which doesnt apply anymore) the licence fees were very expensive which reflects in the fee. I…
08/04/2024 - 11:01
I used Jspec imports - would recommend. Fee was around 1k everything included getting the car on the boat. He linked me with a local…
08/04/2024 - 10:26
That's just completely wrong - what makes you say that? With a heavy car and a bit of throttle (both perfectly legal and safe) those tires…
07/04/2024 - 12:37
Yes it is, especially any car over 2k kg
06/04/2024 - 11:12
The tyres are only 1.1% circumference bigger so no issues there - but make sure they fit. Going the larger sidewall will mean a 3.5mm…
06/04/2024 - 11:11
Give me a slushbox any day of the week!
02/04/2024 - 20:18
Yep. I use it on my Nova EV coated cars - works great.
26/03/2024 - 10:55
it's for all harnessed seats whether forward or rear facing.
22/03/2024 - 13:25
This is just untrue. How hard is it to understand: tighten the straps tight enough to the point where the base of the child seat is not off…
22/03/2024 - 13:24
What body accredits them? Professional doesn't mean mere existence.
22/03/2024 - 13:22
"it should be so tight that if you move the car seat u move the car" Flat out incorrect. It's possible for it to fit like that for some…
22/03/2024 - 08:35
There is no such thing as professionally fitted as there is no such profession as 'baby seat fitter' It's a 5 minute job the first time and…
22/03/2024 - 08:34
It has affected my car that runs on 98 - previously I didnt care about cycle, but just jump into the chopper - now I have to time it…
21/03/2024 - 18:04
I agree with all of your comments except the first one - People who knowingly go into lanes which end and wait till the last moment to…
23/02/2024 - 16:43
Get an important agent. I recommend jspec, I used them!
23/11/2023 - 11:51
As someone with a condition B licence - it's got to do with driving a heavy vehicle... it means you can only drive syncromesh or automatic…
08/11/2023 - 13:57
Standard gas system i.e. vapour - but each cylinder has an injector
03/10/2023 - 13:04
Here are my last few l/100ks. Might be fair to say 21L/100 19.87 20.77 21.53 17.36 23.05 20.32 16.70 22.73 20.58 22.06 21.91 21.17 21.78…
03/10/2023 - 13:04
I did a conversion in June. $4k exactly. Previously getting 18l/100k now getting 20 on LPG as expected. (Heavy city driving) However, the…
03/10/2023 - 11:25
Could you lay say 80m to the shed, and put a weatherproof stand at 80m with the terminated ethernet in there? You would need power to run a…
19/09/2023 - 08:47
Very safe. The most effective substance for cleaning I've used. I used it with plastic scrapers to clean piston crowns and block (heads…
24/06/2023 - 21:43
If you're talking about an engine and not exhaust components, crc gasket stripper with a scraper or plastic razor depending on alloy.
24/06/2023 - 09:19
On cx5? That's a lot!
17/06/2023 - 23:25
The difference on most dipsticks between low and high are only a couple hundred ml. I wouldnt top up with that oil if you're above the low.…
17/06/2023 - 17:46
First time in a while I am not buying it at launch price. Cannot stand the large price difference between PC and console. Completely…
01/06/2023 - 17:52
I have a bigboi blower buddy jr that I got when they first came out. Very useful, love it, can be very light with the microfibre drying. My…
28/04/2023 - 09:35
I've imported one (not the one youre looking at) Used Jspec too. Would recommend.
08/04/2023 - 21:45
https://booko.com.au/ My first port of call when looking for a book
05/04/2023 - 10:37
Loading...