• expired

8-Outlet Connexia Surge Protected Powerboard - $19.99 + Shipping @ COTD

180

1) Pay $19.99 for this modern essential!
2) 2 x USB ports | 1.8m cord | LED indicators | 2 wide sockets
3) Protect your entertainment setup from sudden power spikes!

Features:
8-Outlet Surge Protected Powerboard
Eight individual switches for each outlet
2 wide sockets for those chunky power packs
2 x USB ports allows you to connect 2 USB devices
Energy saver function cuts power to peripheral devices on standby
Surge protection for complete peace of mind
Included LED indicators for ground & fault protection
Resettable safety 10A circuit breaker
Cord length: 1.8 metres
Dimensions approx. (cm): 31.5 x 13 x 3.5
Protected by our 12 MONTH WARRANTY - see 'Warranty' tab with 12 Month Warranty Terms & Conditions for more info.

Technical Specs
Power rating: 240V AC ~ 50Hz
Current: 10A Max.
Power capacity: 2400W Max
Surge current: 18,000 Amps
Surge protection: 175J per metal oxide variation
Total energy absorption: 525 joules
Clamping spike voltage: 775V
Maximum surge current: 18,000 amps
Single shot: 18,000 amps
Two shots: 9,000 amps
Response time: < 2ns
Full EMI & RFI protection: 150KHz ~ 100Mhz
Protection mode: Active - neutral- earth
Protected by our 12 MONTH WARRANTY

Related Stores

Catch.com.au
Catch.com.au
Marketplace

closed Comments

  • The photo on the page implies the USB ports are 2100mA & 1000mA.

    I like powerboards with individual switches. I just wish someone would import powerboards with internal sockets at a reasonable price.

    • +1

      Given I've got one of these boards sitting on the desk next to me now, I can confirm this is the case - 1x 2100mA, and the other 1000mA.

  • any free shipping code?

    • +1

      Unfortunately I don't have one. It would have been an amazing deal, if the shipping was ZERO

  • My worry with the cheaper boards is… how well do they protect really?
    Also, how much power do the lights of the switches consume when all are turned on? Does the USB port consume power when not in use? I don't want a board which consumes 20W just by being plugged in (or worse - is a potential fire hazard).

    • +2

      Cheaper surge protectors can be pretty effective; sometimes even more effective than expensive brand-name ones.
      90% of surge protectors use MOVs; so once they've given their life to clamp a spike or surge, the board's toast and just becomes an ordinary powerboard. Dirty electricity and the everyday voltage fluctuations/spikes in residential power grids wear them down gradually too, so on the rare chance that an actual surge hits your home, they may be totally ineffective at that point.

      They need regular replacing to be of any use at all.

      At this price though, you could most likely find something with a higher energy absorption rating at OfficeWorks, Bunnings, DickSmith or some Audio/Visual store.

      • Thanks, useful link.
        Thinking of going down to MSY to get an 8-outlet Huntkey for $29 instead.

        • Yeah I've got one of those. They're fairly compact.

  • +1

    Shipping to Sydney is $8.05, kinda kills the deal for me.

  • OP you might want to put the full specs in the description:

    Power rating: 240V AC ~ 50Hz
    Current: 10A Max.
    Power capacity: 2400W Max
    Surge current: 18,000 Amps
    Surge protection: 175J per metal oxide variation 
    Total energy absorption: 525 joules
    Clamping spike voltage: 775V
    Maximum surge current: 18,000 amps
    Single shot: 18,000 amps
    Two shots: 9,000 amps
    Response time: < 2ns
    Full EMI & RFI protection: 150KHz ~ 100Mhz 
    Protection mode: Active - neutral- earth 
    Protected by our 12 MONTH WARRANTY
    
  • +1

    http://www.powerfirm.com.au/products/surge-protection/apc-su…

    I bought two of these for $60 shipped. Although they are only a 6 outlet without usb, they are a good brand and offer decent warranty.

    • hmm i really like the idea of having usb on it

  • "Energy saver function cuts power to peripheral devices on standby"

    I can't see any marking on the board at all as to what controls this, and so if I can use the board without it shutting power off to other devices if I don't want it. I don't want my media server PC being shutdown with a hard power cut too often.

  • +1

    Thanks op, used my $20 Easter voucher from the turtle beach headset deal to bring it down to $8 shipped :-)

  • +1

    Thanks op, used my $20 Easter voucher from the turtle beach headset deal to bring it down to $8 shipped :-)

    Me too.

    Energy saver function cuts power to peripheral devices on standby

    I'm also curious to know how this works. I'd been on the lookout for one of the Jackson powerboards with the master/slave setup to turn off a monitor and speaker with really bright LEDs whenever I'm not using my PC.

    • I have all components of my PC (box, monitor, speakers) hooked to a single powerboard, which itself goes into a socket of a surge-protected board that has individual switches. Flicking one switch switches everything off fully. Just switching off your pc using "shutdown" may not be very good, because modern systems keep power to the motherboard (it's a "soft" switch-off), so your pc may still be prone to problems with electricity as it's technically still on.

  • Back again at $19.99, free shipping for orders over $20, thinking of getting one.

  • Mine arrived yesterday. Seems OK - if a little cheap looking - but given I paid $8 total I'm not especially fussed.

    I am a little confused by the below feature; no reference to it in the manual and as far as I can tell it isn't a feature of the powerboard they shipped.

    Energy saver function cuts power to peripheral devices on standby

Login or Join to leave a comment