This was posted 6 years 29 days ago, and might be an out-dated deal.

Related
  • expired

ROCK 360° Universal Car Phone Holder (Updated Edition) $2.29 USD (~$2.98 AUD) Delivered @ Aliexpress

1320
ROCK 360° Universal Car Phone Holder (Updated Edition) $2.29 USD (~$2.98 AUD) Delivered @ Aliexpress
Go to Deal
Cashback
doweyy on 28/03/2018 - 19:34 aliexpress.com (6654 clicks)
Last edited 29/03/2018 - 14:28

Awesome price for this little gadget. Extremely popular the last time I posted it but now even cheaper if you weren't able to get the app coupon.

This is a genuine updated version of the phone holder and it's really good quality. Make sure to choose the "Updated Edition". Both grey and green available at time of posting.

The deal lasts for 3 more days if you want one. Make sure to choose Free Shipping to get this price.

Make sure to press on "China" next to "Ships From" and then choose the colour you want.

Thanks to WatchNerd, remember to combine with 10% Cashback for AliExpress @ Shopback or Cashrewards. Actually, Shopback is running 15% Cashback for ROCK, Aukey, Bludio and some other products!

As always, enjoy!

Mobile Mobile Phone Accessory Phone Holder

Related Stores

AliExpress
AliExpress
Marketplace
Rock OfficialFlagship Store
Rock OfficialFlagship Store

closed Comments

  • Neis on 28/03/2018 - 19:50
    +1

    Does the phone sag when installed, main culprit for these things.

    • simmy on 28/03/2018 - 19:53

      Mine sagged. Perhaps because of my iPhone 7 Plus

    • orangetrain on 28/03/2018 - 22:15

      Not sure about this model but my model has a screw in back that you tighten after rotating. Its pretty sturdy. S6 here.

      • simmy on 29/03/2018 - 06:49

        I think it's my vent that actually sags and not the holder :(

        • skhun on 31/03/2018 - 03:40

          My vent sags too but you can set the position from there!

    • sAmiZZle on 29/03/2018 - 18:34

      No, you can do up the holder quite tight so it doesn't say. However, I find aimng the vent down to begin with and clipping on to the portion of the vent that has the thick tab that you use to direct the vent is the best, most secure and stable way.

    • skhun on 31/03/2018 - 03:42

      I use this, and this holds mine tight, using for note5 and pixel 2 XL. I have lather flip case with note 5, so when I flip the front part, the car holder is actually holding on the front cover but it still holds very tightly

      I would say this is the best product that I ever used.

  • [Deactivated] on 28/03/2018 - 19:54
    +9

    This thing is great except when you want to use your AC because it either blocks cold air or overheats your phone.

    • Kangal on 28/03/2018 - 20:18
      +6

      Cold air is good when…
      …phone is hitting the magnified sunrays, fast-charging, streaming music, connecting to LTE, and doing GPS Navigation.

      • maddykartik on 29/03/2018 - 07:40
        +2

        exactly…

        In winters, when you turn aircons to heat mode, simply close that vent's airway switch and you can still have this thing mounted to the vent.

      • desert eagle on 29/03/2018 - 11:27

        Just get a car with dual-zone climate control - problem solved!

        • nurbsenvi on 30/03/2018 - 12:17

          Isn't it cheaper to replace the phone 10 times rather than changing a car?

          -Captain Obvious-

  • shibu-thomas on 28/03/2018 - 19:57

    0 available

    • doweyy on 28/03/2018 - 19:59

      Press China above the 4 selections of stock and then the colour you want.

  • b-radicool on 28/03/2018 - 19:58

    How hard is it to open the clamp to insert the phone in?

    I have one (not sure if genuine), and it's extremely hard to insert my phone in one-handed.

    The flipside of this is that I know it's not going to fall out easily.

    • 51ngh on 28/03/2018 - 20:06
      +5

      I’ve pinched my fingers.
      I prefer the magnetic one now.

    • paaj on 28/03/2018 - 20:18
      +1

      yeah the "spring" is quite hard but it can be done with one hand. Definitely holds on to the phone!

    • LoungeLizard on 29/03/2018 - 08:27
      +1

      It's a bit fiddly, you really need two hands to get the phone in/out. Although …. you're not supposed to mess around with the phone while driving.

    • sAmiZZle on 29/03/2018 - 18:39

      Frankly, I'm just going to say it, the thing has a lot of tension on it to hold a big phone so it naturally takes some effort to open. It requires two hands to hold it onto the vent. One so it doesn't move and the other to slide the phone into the holder. Magnetic would be so much easier but your phone could fall off on a bump. For the price I expect no more from its design… You decide.

      • b-radicool on 29/03/2018 - 18:51
        +1

        A rather dramatic response, but thankyou samizzle.

        • sAmiZZle on 29/03/2018 - 20:18
          +1

          Haha I over analyse everything! 😁

  • diaz on 28/03/2018 - 19:58

    Own 2 of these, very handy. Blocks aircon vent yes but keeps your phone cool (esp when charged) and prolongs batt life.

  • jikijiki on 28/03/2018 - 19:59

    Could someone describe how it attaches to the car?

    I'm looking for a phone holder for my push bike, and was wondering if this could attach to the handlebar area.

    • bumheadboi on 28/03/2018 - 20:22
      +1

      i believe it clips to the air vent

    • paaj on 28/03/2018 - 20:22
      +1

      it attaches to one of your air vents. Definitely not handlebar. here's a pic from google images

  • cowiie on 28/03/2018 - 20:00
    +1

    Got one last time. Dunno if I got a bad one but it doesn’t hold my phone upright anymore. Just turns horizontal it cause it’s heavy. Only happened this month

    • [Deactivated] on 28/03/2018 - 20:12
      +1

      Tighten it up from the back. It happened to mine.

      • cowiie on 28/03/2018 - 20:15

        Cool I’ll give it a try tomorrow!

  • sudoroot on 28/03/2018 - 20:02

    These are great! grabbed another one.

  • waterbottled on 28/03/2018 - 20:04

    Got one, thanks

  • brokenglish on 28/03/2018 - 20:12
    +4

    Noooo, I dont need this!
    .
    .
    .
    .
    .
    bought 2…

  • AssociatedKapinny @ Rock OfficialFlagship Store on 28/03/2018 - 20:12
    +1

    blocks the air conditioner so didnt really find it useful

    • AussieDaddy on 28/03/2018 - 20:15
      +11

      Well, don't you take part of the blame since you're "associated"? Shame on you, Kapinny.

      • AssociatedKapinny @ Rock OfficialFlagship Store on 28/03/2018 - 20:59
        -2

        whoops must have accidentally ticked the box for associated, i am not associated to this vendor

        • AussieDaddy on 28/03/2018 - 21:00
          -2

          Haha! I know. That happens sometimes. Just wanted to mess with you. :p

        • clandestino on 28/03/2018 - 22:15
          +3

          @AussieDaddy:

          Don't listen to him, Aussiedaddy.

          He's an employee who accidentally forgot to uncheck the box, before criticizing his aliexpress overlords.

          Kapinny -I hope they don't fire you.

        • AussieDaddy on 28/03/2018 - 22:22

          @clandestino: :-)

  • seamonkey on 28/03/2018 - 20:13
    +1

    This better than the Original ROIDMI Car Holder
    Magnetic Air Outlet Mount Bracket Phone Stand? I've got the Roidmi and love it.

    https://www.gearbest.com/stands-holders/pp_625749.html

  • browser on 28/03/2018 - 20:23
    -1

    Don't forget that vent mount blocks a large part of the vent, and if you don't close the vent, it will get very cold/hot when the air conditioning/heater is on.

    • orangetrain on 28/03/2018 - 22:17
      +1

      You need vent open for clip to work.

      • browser on 28/03/2018 - 23:25

        I meant stopping the air flow.

  • etlok on 28/03/2018 - 20:25
    +1

    I still not receive mine ordered at the end of Jan

    • Tony76 on 28/03/2018 - 20:27

      And with 8000+ ordered I think everyone will be waiting a while for these…

    • adamchan on 28/03/2018 - 20:50

      me too =(

    • Mahalo on 28/03/2018 - 21:08

      Still waiting too

    • sween64 on 28/03/2018 - 21:40

      Damn. I ordered mine on 23rd Feb. I really wish it was here by now.

    • Going Broke on 28/03/2018 - 22:47
      +3

      Yes I ordered mine on 31 Jan as well and haven’t receive it. Seems like the seller is taking buyers for a ride. I have opened up a dispute last week. I’ve just been told by live chat that it will be escalated next week as that’s when buyer protection runs out.

      I encourage all who ordered in end of Jan and didn’t receive it yet to open dispute otherwise you will run out of time.

    • SgtGrumbles on 29/03/2018 - 06:59

      thanks for the prompt about dispute… been wondering whether mine was going to arrive. Lodged dispute, ordered two more!

    • ITveteran on 29/03/2018 - 09:04

      It's Aliexpress. What do you expect?

  • BloodyRoses on 28/03/2018 - 20:26
    +2

    Just going to say that these sag on horizontals by quite abit, and this deeper fin config really doesn't help that vs the fat older one in that its a concentrated mass on a much small surface area in terms of where it's placed on your ac vents.

    And it only really works on small-medium sized horizontal fins, if your fins spin or are vertical do not buy these they will become a merry go round and ferris wheel aio.

    Edit* To be a little more fair to these, the plastic is of a good quality and the price is fabulous, so if what i mentioned above does NOT apply to you and these fit perfectly then its still a steal, thanks OP!

  • DiscoJango on 28/03/2018 - 20:35
    +2

    got one of those vent magnet things, havent looked back since. heaps better than these clip style ones

  • Javin on 28/03/2018 - 20:51

    Seems it is Sold out as cant add to cart

  • Abbi on 28/03/2018 - 20:54

    Bought a couple a while ago, they are ok, only problem and reason I don't use it anymore is my dash has quite a slope and the arm on this is no where near long enough to get it to vertical or anywhere near that, so it ends up pointing at the ceiling. Which is pointless.

  • boretentsu on 28/03/2018 - 21:07

    I got one of these last time and the clamp warped after a few uses.

  • shiny1 on 28/03/2018 - 21:12

    These are crap. They're hard to put the phone in, and hard to put the phone out. A phone dock should be easy in, easy out. Ideally, it should be one-handed operation and no extra force needed.

    • dufflover on 29/03/2018 - 00:05
      +1

      … That's pretty much that she said.

  • neonlight on 28/03/2018 - 21:13

    Received unbranded fakes before from an eBay deal posted before…. No faith on the rock products

    • doweyy on 28/03/2018 - 21:15

      This from the official ROCK store not an eBay seller. These are genuine.

  • supaderp on 28/03/2018 - 21:14

    They are designed for phones to be positioned landscape mode, hence there is no bottom support. Problem is that the phone's weight just pivots the holder all the way down.
    They work well if your headunit sits slightly above your AC. Otherwise don't bother buying these.

  • rko on 28/03/2018 - 21:22
    +3

    I bought three of these last time to replace the apparently fake ones from a previous deal (which were good, but broke very quickly). I ordered the new design. I agree these are made from a sturdy plastic and are of good quality etc. but the overall usefulness is not great, at least for me.

    I want the insertion and removal of the phone to be a one handed operation. Unfortunately when you try to do this by pushing the phone into the sliding side of the holder to open it up, the grip is not strong enough to hold to the vent and the whole contraption just comes off the vent. In my case I have to either hold the holder with one hand while inserting the phone with the other and readjust the holder’s grip on the vent, or take the holder off the vent, mount the phone on the holder and then mount the holder and phone back on the vent. This in reverse to take the phone out. For me this is a major pain and makes them unusable.

    It’s worth noting a few things:
    - the ball offsets the holder from the vent, which creates significant leverage when trying to insert the phone as described above, so the grip can’t hold on.

    • the new design has a spring to hold on to the vent, possibly the old style is stronger.

    • the “fake” one I had previously did not have a ball, so was able to hold on to the vent significantly better for one handed operation (less leverage on the grip).

    Your mileage may vary, but this may be worth considering before you buy.

  • Yorkshire-Man on 28/03/2018 - 21:37

    Have V1 and love it.

    Seems to show 0 available however ? Shame. Thanks anyway OP.

    • doweyy on 28/03/2018 - 21:37

      There's 1236 available :) Just need to select China next to "Ships From" and then choose the colour.

  • zqipz on 28/03/2018 - 21:45

    I found the old/fake version better than the new version. Old/fake seems more sturdy never failed. New version, first use phone and holder went flying across the car. Was either cornering or braking but wasn't aggressive by any means.

    • apey2000 on 30/03/2018 - 17:33

      ^^^ Fake seller here

  • cdaddy on 28/03/2018 - 22:10

    Some of you people clearly don't know how to use something so simple

  • kalupet on 28/03/2018 - 22:28

    ordered 2 last feb 1 and haven't received it yet

  • clandestino on 28/03/2018 - 23:03

    This post is a classic case of "buy-quickly-in-case-it-sells-out, then-watch-negative-comments-flood-in"… Lol

    @kapinny, can I get a refund please? ;)

  • D6C1 on 28/03/2018 - 23:06

    Is this going to break my phone because the holding spring mechanism is sooo tight!

  • veron on 28/03/2018 - 23:09

    I got this for more than 2y, it works perfectly.

  • ivegan on 28/03/2018 - 23:27

    Kmart has got for 4 bucks

  • timcc0208 on 29/03/2018 - 00:41
    +1

    I bought this one but it doesn’t do the job

  • wog_ta on 29/03/2018 - 06:46

    Bought one through last deal and spring mechanism is crap, the updated ones might be better though

  • pizzapock3t on 29/03/2018 - 09:03

    And now we wait, cheers op.

  • Click_It on 29/03/2018 - 09:28

    Are these the updated version / are there updated versions left?

    The OP said to select the updated version, I don't see it unless these are it by default.

    EDIT: Nevermind I see it's in the selectable pictures.

  • jacknthebeanstalk on 29/03/2018 - 11:36

    I currently have one. Wouldn't recommend it.

  • crikey on 29/03/2018 - 12:05

    Thanks bought one. The grey updated version is gone, only green left.

  • Yorkshire-Man on 29/03/2018 - 12:13

    For those of you having issues, it doesn't work from my iPhone but works perfectly via the desktop.

  • jffk47 on 29/03/2018 - 13:02
    -1

    Tried to get the old ones via ebay from a few months ago, but didnt come.
    There was a $4 off $5 USD coupon that popped up so got 3 for under $4 AUD. plus cashback. Win and TY OP.

    • mentos on 29/03/2018 - 14:20

      How to get that coupon?

      • jffk47 on 29/03/2018 - 18:52

        Just popped up. Screen kinda went dark and there was a red coupon thing in the middle saying $4 off $5 USd

  • ArnoldSchwarzenegger on 29/03/2018 - 13:24
    +1

    Anyone notice one of the photos has a description saying "unstable, unpractical and ugly"?

    • psyclone1982 on 29/03/2018 - 15:18

      I think it's a very badly designed way of saying the old style "X" Clip they had was unstable, unpractical and ugly.

      It's just that it doesn't really state they are referring to the old design, they just put an "X" above it.

Login or Join to leave a comment
Login Join