Mechpro Cantilever Tool Kit 148 Piece $49 (Was $129) @ Repco (VIP/IGNITION Membership Required)

220

Go to Deal

RockyRaccoon on 04/11/2019 - 08:02 repco.com.au (1538 clicks)
Last edited 04/11/2019 - 10:46 by 1 other user

This was previously featured here at $77 (50% off)
https://www.ozbargain.com.au/node/478578

You need to be a VIP member, which is now called Ignition. It is free to join, benefits instant (or so it says). See link below

The Mechpro 148 Piece Cantilever Tool Kit isnt for the serious mechanic, or serious DIYer, but for anyone who is a bit handy and may need the occasional tool, for small mechanical, or household work, it does the job and has a 3 year nationwide warranty. Like if you want to fix your thermostat, valve cover leak, measure up the new shelving unit to go in the garage or just stick a couple bits of automotive artwork on the garage wall.

Is not a Sidchrome replacement!

The kit includes the following

10x 1/4 inch Drive Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm
6x 3/8 inch Drive Sockets: 14, 15, 16, 17, 18, 19mm
1x 3/8 inch Drive Extension Bar: 75mm
1x 3/8 inch to 1/4 inch Adaptor
1x 1/4 inch Bit Coupler
1x 1/4 inch Drive Spinner Handle
11x 25mm drill Bits Set
21x 3/8 inch Drive Ratchet Handle Quick Release
8x Hex Keys: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm
6x Screwdrivers
5x Combination Wrench: 10, 13, 14, 15, 17mm
1x Crimping Tool 200mm
82x Crimping Terminals
1x Circuit Tester
4x Precision Screwdrivers
1x Utility Knife
1x Tape Measure 5m
1x Mini Hacksaw
1x Combination Pliers 150mm
1x Long Nose Plier 150mm
1x Multi-grip Plier 250mm
1x Locking Plier 175mm
1x Ball Pein Hammer 225g
1x Metal tool box

https://www.repco.com.au/en/vip

Related Stores

Repco

• 

  MickBubba on 04/11/2019 - 08:18

  +1

  There is also this one on Sale. Just need to register your free VIP account.
  https://www.repco.com.au/en/tools-equipment/tool-kits-sets/t…

  • 

    Owgasm on 04/11/2019 - 08:31

    Which do you think would be the better option?

    • 

      TheFatCat on 04/11/2019 - 08:43

      Depends on what you need I reckon, for basic tools to use in household then use OP’s link otherwise use MickBubba’s link (this one doesnt have hammer and thin nose plier).

• 

  MickBubba on 04/11/2019 - 08:42

  From reviews I have read, the Mechpro are slightly better quality and the reason why they give 3 year warranty vs the GV 1 year warranty. But the other consideration is the tools that come with each set and the toolbox itself. That is a personal preference based on what you need for home. $49 for either is a not much, so only good enough for home handyman type work and not a serious tradie type work. Maybe a good Chrissy present for the father-in-law…

  • 

    Owgasm on 04/11/2019 - 09:03

    Thanks, probably will go with OP.

    It’s just something complete to fill the gaps in my make shift tool set.

  • 

    Owgasm on 04/11/2019 - 09:12

    A question about warranty, what does that even cover?

• 

  garage sale on 04/11/2019 - 09:08

  Mechpro usually aren't CR-V steel, so ok at this price for occasional work, but you want CR-V steel if intending regular use.

  • 

    Owgasm on 04/11/2019 - 09:12

    Is the one linked in first comment, CR-V steel?

• 

  Zaddo on 04/11/2019 - 09:26

  +1

  N1 OP.

  Must Resist Bargain… I don't need it….. damn you ozbargain…

• 

  LowRange on 04/11/2019 - 10:44

  Good price for the odd job for someone with no tools. Hate cantilever toolboxes though, tippy awkward bloody things. And those black plastic moldings the tools sit in last about 0.5 seconds. But for that price you could just buy a soft Toolpro toolbag and ditch the box.

• 

  Kranbone on 04/11/2019 - 11:13

  great value. mechpro stuff is not that bad.

• 

  Owgasm on 04/11/2019 - 15:39

  +1

  Went and looked at both of them today.
  I walked out

  • 

    JerryB on 04/11/2019 - 19:23

    +1

    …with both…

    • 

      Owgasm on 04/11/2019 - 20:04

      +1

      Unfortunately none.
      I’m a sucker for a bargain but this wasn’t even close.