TPG to Superloop nbn VR1600v no internet

Ltomk1234 on 13/04/2020 - 14:03

Hi has anybody had any luck switching from tpg to superloop using the modem VR1600v provided by tpg? is the modem locked? thanks

Internet

Related Stores

Superloop
Superloop

Comments

  • PSPeter on 13/04/2020 - 14:54
    +3

    The TP-Link VR1600v is a standard modem/router that usually comes pre-configured from TPG. Have you tried factory re-setting and then configuring the settings to match your new ISP?

    • Cheapascents on 13/04/2020 - 15:53
      +3

      this guy is right, tp link vr1600v supplied by tpg arent locked, FR modem and configure the settings to superloop and you should get a radius sess within a minute

  • Slippery Fish on 13/04/2020 - 14:56
    -3

    Step 1 buy a telstra modem secondhand. Step 2 switch to laurel. Don't even need to configure it just works…

  • Slippery Fish on 13/04/2020 - 14:57

    Launtel

  • hoey888 on 13/04/2020 - 15:55

    Use at your own risk.

    Admin rights to VR16000v2
    https://www.marcelvarallo.com/so-we-cracked-the-archer-vr160…

  • KanTakahashi on 19/04/2020 - 19:36

    I'm assuming that it's fttn? As long as your router is not locked and have IPoE(DHCP/Dynamic IP), youre good to go.

  • mmniks on 05/09/2020 - 19:19

    Hi, Did you get it to work? I'm in a similar situation and nothing seems to work.

  • SnoozeAndLose on 05/09/2020 - 19:27

    For FTTC:I believe you need to update the username and password on your router.
    Not sure if other NBN connection type is the same.

    Superloop should have given this info to you.

    • mmniks on 05/09/2020 - 19:50
      +1

      Thanks, just got it working for FTTC. Had to use Dynamic IP instead of PPPoE as connection type for EWAN, after deleting all DSL configurations, with no username/pwd.

      • fantoo on 20/11/2020 - 08:45

        hey mate, would you be able to dm me the superloop config?

        or is it the same one posted on whirlpool?

        thanks mate

        • Twix on 20/11/2020 - 12:22

          Dynamic IP is the WAN config.

          • fantoo on 21/11/2020 - 00:33

            @Twix: Do I set dynamic ip in wan first and go to dsl and select that setting again?

            • Twix on 21/11/2020 - 11:01
              +1

              @fantoo:

              1. advanced, operation mode, choose wireless router mode, save & the VR1600v will reboot.
              2. basic, internet, choose Dynamic IP as the connection type & save.
  • MELso on 06/09/2020 - 10:52
    +1

    You may need to turn off VLAN tagging. Otherwise, it should work…

    • jv on 21/11/2020 - 00:36
      -1

      You can turn it off ??? How?

      • Twix on 21/11/2020 - 10:53
        +1

        Basic, internet, uncheck the VLAN tag box & save.

  • AssociatedOUYE @ Superloop on 08/11/2021 - 14:49
    +1

    Had the same issue as the OP, and follow below steps to resolve:
    Login to router, Advanced>Network>EWAN, delete all existing connections and add a new connection selecting Dynamic IP connection type> save
    Navigate to Network>DSL, delete all connections

    Problem solved

Login or Join to leave a comment
Login Join