Twix » user profile

Role Power User
Member Since 26/11/2018
Last Seen Hidden
Badges 45 14
Location VIC

Recent Activities

Yeah do that. Deco M5 is capable of about 900Mbps wired ethernet and up to 450-500Mbps with Wi-Fi 5. Check that your Wi-Fi device is using…
05/12/2024 - 17:17
100/20, 250/25 and 1000/50 is going away on FTTP and HFC and there will be new speed tiers. 500/50 (FTTP and HFC). 750/50 (FTTP and HFC).…
05/12/2024 - 17:05
They got what they voted for. Now look at all the complaints about slow speeds and dropouts on copper 😂
05/12/2024 - 17:05
It is what it is. More homes will get FTTP and that's all that matters.
05/12/2024 - 16:59
That is not nbn's fault. nbn was doing FTTP to 93% of AU until Abbott and Turnbull thought they could do it cheaper. Now nbn are rebuilding…
05/12/2024 - 16:53
OptiComm FTTP doesn't run any better than nbn FTTP. >I have never had down time ever it just works never had a bandwidth issue it just…
05/12/2024 - 15:12
Lock it in **Eddie.**
05/12/2024 - 10:55
From my quick napkin math it's more like 36%. FTTP 25% and the 1.4 million still on FTTC that can swap to FTTP so + 11% = 36%. Most of FTTN…
05/12/2024 - 10:34
You'll have to wait until September 2025 (FTTP and HFC only).
05/12/2024 - 10:06
You can use OneMesh if you already own the Archer AX55. I'd go with a Deco setup if you're starting from scratch.
03/12/2024 - 09:30
--- is an ethernet cable. Telstra modem/router LAN port --- TP-Link Archer LAN port. Configure the TP-Link Archer as a Wi-Fi access point.
03/12/2024 - 09:24
My mistake. Thanks for fixing it quickly.
02/12/2024 - 23:35
TP-Link Archer AX55 is compatible with all providers.
02/12/2024 - 23:02
TP-Link Archer AX55 has TP-Link OneMesh support.
02/12/2024 - 23:01
You might need a TP-Link Deco 2-pack or 3-pack instead of the Archer.
02/12/2024 - 21:33
Leaptel and Superloop 12 months deals are better and even 1000/50 at Buddy Telco is cheaper ongoing.
02/12/2024 - 16:40
Yeah your only other option is Starlink. Some games will be playable but the ping won't be super low. Are you staying at this rental or…
02/12/2024 - 10:22
FTTP can be installed either way. Ask the installer what their plans are. [nbn FTTP…
01/12/2024 - 21:25
All good. I'd recommend factory resetting the eero router and start fresh when you get FTTP.
01/12/2024 - 20:14
Option 1. The nbn installer puts the nbn NTD box where you want for free. 1a. If you can't agree on the nbn NTD box location you can…
01/12/2024 - 19:48
Check if you can swap from [nbn FTTN to FTTP](https://www.nbnco.com.au/residential/upgrades/more-fibre). If not then iiNet VDSL2 can be…
01/12/2024 - 18:08
Yeah that's right. I can tell you your nbn NTD options if you want everything setup in the same room?
01/12/2024 - 16:39
The nbn NTD only needs access to power and the nbn NTD doesn't have to be in the same room as your eero router and NetGear switch. An…
01/12/2024 - 16:13
You lose access to [these eero…
01/12/2024 - 15:37
If you didn't use the 'kick the connection' trick then 20 minutes isn't long enough to get bridge mode working. It has to be at least 30…
01/12/2024 - 15:06
Your NetGear switch needs to be plugged into the eero 6+ router. Did you enable bridge mode on your Telstra modem?
01/12/2024 - 13:41
Loading...