Is Your BPC Tech Prebuild Meeting Benchmarks?

LBig-Smoke23 on 19/08/2021 - 11:36
Last edited 19/08/2021 - 11:48 by 1 other user

Hey guys, I recently bought a pre-built from BPC tech and it arrived last week. Specifically, I got Kraken power fenrir build with Ryzen 5 3600 and RX6700 XT. I also upgraded the case as well. Paid about $1800 altogether.

However, when i did some benchmarking, the performance hasn't been up to par with other YouTube benchmarks.
For reference, my fps averages (1080p) are
90fps for GTA
230fps for CSGO
230 fps for Rainbow
60 fps for Total war Attila
People with 5700xt and R5 3600 have better frames than me! FFS

So I'm wondering if anyone has bought this specific build and are you guys getting the same fps? and what fps should I be getting? should I get a return? has your BPC pre-built been up to par?

Mind you I wiped the drives and reinstalled windows to fix it before but the problem is still there :/ please help

Computing Computer Desktop Computer

Related Stores

BPC Technology
BPC Technology

Comments

  • 87percent on 19/08/2021 - 11:38

    i'd be posting this on whirlpool or reddit

    • Big-Smoke23 on 19/08/2021 - 11:45

      yea I think I'll just copy and paste onto r/bapcsalesaustralia. Any other subs you'd recommend?

  • SnowDragon on 19/08/2021 - 11:47
    +1

    You have to remember that specs aren't everything - there are other factors to take into account.

    GPU brand, RAM, Mobo and possibly PSU (if components are trying to draw too much) all come into play. You're never going to get the exact FPS as another person with the same CPU and GPU.

    Are you happy with the performance your PC is giving you for $1800? If your monitor is locked at 60hz it won't even matter anyway :)

    • Big-Smoke23 on 19/08/2021 - 11:49

      GPU brand is MSI
      Ram is 3200mhz XPG
      Mobo is GIGABYTE A520M
      Power supply is EVGA 600w
      Monitor is M27F (144hz)

      Not really happy because people with lower specs are getting higher fps. $1800 is a lot just for a subpar experience

      • garetz on 19/08/2021 - 12:04
        -2

        Considering these specs i would say the power supply is not providing enough power to your video card which is causing it to throttle.

        600 watts is usually enough however it also depends on efficiency.

        make sure you have 2 channels providing power if it has 2 x 8 pins which looks to be the case looking at images.

        • jaejae69 on 19/08/2021 - 13:21
          +2

          Extremely unlikely for a 600w to be the bottleneck of a 6700xt.

          I ran a 6800 for several months on a trash tier 600W with no performance loss. Obviously I’m not saying that any old PSU will be fine because there are other issues with that, but I can’t see any scenario where the issues manifest in performance loss only.

          • garetz on 19/08/2021 - 13:21

            @jaejae69: check you got 2 separate power channels powering the video card

            • jaejae69 on 19/08/2021 - 13:30

              @garetz: Sorry are you confusing me for OP maybe? But yeah could be worth checking physical connections.

              • garetz on 19/08/2021 - 13:32

                @jaejae69: yeah i thought only the op would reply so didnt bother looking.

  • pharkurnell on 19/08/2021 - 11:49
    +1

    What did BPC tech say when you contacted them?

    • Big-Smoke23 on 19/08/2021 - 11:50

      Reinstall windows and that was last friday - haven't contacted since

  • alex4445 on 19/08/2021 - 11:55

    Have you checked your temps?

    If there is an issue with the cooling it could be thermal throttling.

    • Big-Smoke23 on 19/08/2021 - 11:57

      prior to reinstalling windows, I was averaging around 75-80C for GPU and around 70C for CPU on Afterburner IIRC, however, CPU usage was pretty low sitting around 30-40% but haven't found a fix for that.

      • alex4445 on 19/08/2021 - 12:04

        So that was while it was under load not at idle?

  • ln28909 on 19/08/2021 - 11:58
    +1

    It's very likely that they forgot to enable xmp

    • Big-Smoke23 on 19/08/2021 - 12:03

      Nope, i went into the bios and enabled XMP

    • xylarr on 20/08/2021 - 10:05

      You should also check if PBO is enabled.
      Basically XMP + PBO is the easiest no brainer performance boost for Ryzen systems.
      Maybe need to find out if you have a graphics of CPU issue. Try running Cinebench to check and compare your CPU setup.

  • B3 on 19/08/2021 - 12:09
    +1

    What are youtube benchmarks? When people post benchmarks publicly they tend to exaggerate, or overclock as much as possible to get a score that is not maintainable long term. I assume you're running everything at stock.

    Try non identifiable benchmarks like 3DMark

    • Big-Smoke23 on 19/08/2021 - 13:04

      I did install 3DMark prior to wiping the drives and IIRC i got around avg 55fps on TimeSpy. Also, someone with similar specs were benchmarking GTA5 and they're were getting almost double the frames. :/

      • Master Bates on 19/08/2021 - 13:26

        Were you adjusting all of the in game graphics settings to match the videos too?

        • Big-Smoke23 on 19/08/2021 - 14:27

          sorry, I'm not too sure what you mean by that but i ran TimeSpy as it was, didn't tinker with any settings.

          • Master Bates on 19/08/2021 - 14:54
            +1

            @Big-Smoke23: I meant in GTA. I believe with game benchmarks they sometimes turn all the in-game settings down to their lowest or even off to get the best performance, hence there could be differences in the results if you’re not matching the in-game settings.

  • iDarelones on 19/08/2021 - 16:10

    Is the ram running at it's rated speed?

  • ShannonN on 19/08/2021 - 22:34

    with a 2600 cpu and RX 580 Im getting 45 fps on default Timespy (Not Timespy Extreme or Timespy for gaming pcs). so 55 sounds about right, I'd do the cpu test in 3d mark and compare that to others online as well

Login or Join to leave a comment
Login Join