This was posted 2 years 7 months 26 days ago, and might be an out-dated deal.

Related
  • expired

Single Arm VESA Monitor Mount $29 Delivered @ Selby Acoustics/eBay

290
Single Arm VESA Monitor Mount $29 Delivered @ Selby Acoustics/eBay
Go to Deal
Cashback
pyr0maniac on 25/08/2021 - 12:25 ebay.com.au (1739 clicks)

Can use AFTERPAY10 or PYGGL10 (with $1 item) to bring price down to $19.

Very basic monitor arm but excellent for the price.

Desk Mount for 1 LCD Monitor
This quality LCD monitor arm bracket allows you to clear out your desk surface, while providing an ergonomic working position. The full motion structure allows maximum flexibility - extend, tilt and swivel your monitor for easy viewing. You can also adjust the monitor vertically.

Grommet / Clamp Mount
This bracket/mount attaches easily to your desk or table using a high quality grommet or clamp allowing you to conserve precious desk space. The grommet/clamp can fit desks/tables with a thickness of 10mm - 88mm.

Amazingly Adjustable
This bracket allows you to adjust the height of the screen, tilt forwards and backwards, pivot from left to right, and rotate the screen from "landscape" (horizontal) to "portrait" (vertical).

Easy To Set Up
This stand makes it incredibly easy to attach your monitor. The top two 100mm VESA holes on the mounting plate allow you to simply hook your monitor in before fixing the other screws. This makes setup less awkward and easier for one person.

Will This Bracket Fit My Monitor?
- For screen sizes up to approx 13-27 inches measured diagonally.
- For monitors weighing up to 8kg each.
- Fits VESA mounting standards 100 and 75 (ie: screw holes that are 100 x 100mm or 75 x 75mm apart).

Features:
- Height Adjust
- Installation: Grommet, Clamp
- 180 degrees swivel
- 360 degrees rotation
- Max Arm Extension: 274mm
- Pole Height: 450mm
- Cable Management
- Suggested Desktop Thickness: 10-88mm
- Easy Installation

Specifications
- Dimensions: 116 x 335 x 550mm
- Maximum weight support: up to 8kg for each monitor
- Suitable screen sizes: 13" to 27"
- Arm Max Extension: 274mm
- Installation: Clamp, Grommet
- Suggested Desktop Thickness: 10mm - 88mm
- Fits VESA mounts of 100x100mm and 75x75mm
- Tilt Range: +45° ~ -45°
- Swivel Range: +90° ~ -90°
- Screen Rotation: +180° ~ -180°
- Cable Management: Yes
- Aluminium, Steel

Computing Monitor Arm

Related Stores

eBay Australia
eBay Australia
Marketplace
Selby
Selby

closed Comments

  • jv on 25/08/2021 - 12:27

    FYI, can also use AMEX

  • BuyFlys on 25/08/2021 - 12:34
    +2

    AFTERPAY10 for $10 off paying with Afterpay

    • bt123123 on 25/08/2021 - 12:54

      i cannot use this code
      "This code can't be applied to your order."

  • dvsx on 25/08/2021 - 12:35
    +7

    FWIW I am using this with a 38 inch ultrawide and holding up fine.

    • R3XNebular on 25/08/2021 - 13:24

      Which monitor? Dell aw3821?

      • dvsx on 25/08/2021 - 13:32
        +1

        Yup

        • R3XNebular on 25/08/2021 - 13:57

          Ooo can you please post photo of your setup

          • dvsx on 25/08/2021 - 15:16
            +5

            @R3XNebular: lol sure (working from home hence the 2 keyboards/mice)

            https://imgur.com/a/1Ku8Amh

            • IamaCam on 25/08/2021 - 16:18
              +1

              @dvsx: very tidy mate. good to know it supports it well I'm hoping that it will be flexible as I will side mount it and use the extending arm to adjust the viewing angle (space limitations). The specs referred to 360deg and 180deg rotation and swivel…so hopefully it works.

            • Jakeo on 25/08/2021 - 18:12

              @dvsx: I feel ripped off now, bought a NB f100a stand ($75) for my Xiaomi ultra wide.
              Could of just got this

              • dvsx on 25/08/2021 - 19:15

                @Jakeo: Dang, I had it already for my previous monitor before going ultrawide so I figured I'd just try it before buying another.

            • Rizzler on 25/08/2021 - 19:34

              @dvsx: hey mate, does this arm allow circa 10cm distance between wall and back of mount?? my desk isnt too deep and dont want the monitor in my nose - cheers!

              • dvsx on 26/08/2021 - 11:08
                +1

                @Rizzler: I've got about 11-12cm between the wall and centre of mount.

                But I guess that also depends how far your desk is away from the wall. My desk is about 7cm from the wall. Hope that helps.

    • IamaCam on 25/08/2021 - 14:35

      nice would love to see this too.

  • Levi on 25/08/2021 - 12:42

    Is there a longer one so I can have a monitor mounted above my current one?

    • escaleraRN on 25/08/2021 - 12:53

      also considering this setup. might be bad for our neck in theong run?

      • Clear on 25/08/2021 - 13:20

        I have 3 monitors above my ultrawide at work and have tilted them down a bit. Reduces the neck movement a fair bit. Good for the glare as well.

  • jazzleg on 25/08/2021 - 12:43

    Is it better to get this one or the North Bayou H80?

  • Anthony8888 on 25/08/2021 - 12:53

    Is it need to make hole on the desk?

    • pyr0maniac on 25/08/2021 - 13:12
      +2

      Only if you want to use the grommet mounting option, you can use the C-clamp otherwise - just remember to reinforce with some timber if your desk is made out of hollow timber or the like.

  • bt123123 on 25/08/2021 - 12:53

    This code can't be applied to your order.

    • escaleraRN on 25/08/2021 - 13:01

      need to choose AfterPay I think.

    • pyr0maniac on 25/08/2021 - 13:18

      Or use Android app with Google Pay if you're using PYGGL10 (which is what I did)

      • Void on 25/08/2021 - 13:45
        +1

        Doesn't work for me.

      • Zilch on 25/08/2021 - 14:20

        What $1 item did you get?

        • IamaCam on 25/08/2021 - 14:34

          i ended up going through ebay lowest price items. bought a sticker that i can give to the kids for $1 lol. great way to make use of the voucher. been looking for a stand!

        • pyr0maniac on 25/08/2021 - 14:36
          +1

          Same as IamaCam, got some stickers for the kid haha

          • IamaCam on 25/08/2021 - 14:49
            +1

            @pyr0maniac: They'll just have to learn to share for the one sticker of $1 lol

  • escaleraRN on 25/08/2021 - 13:02

    just ordered one for $19. can always return it back if the fit is nkt so good.

  • Vavoom on 25/08/2021 - 13:09

    No-brainer for $19 after using the Afterpay voucher.

  • enzo3162 on 25/08/2021 - 13:51

    How big does the grommet hole need to be?

  • Deals For Days on 25/08/2021 - 17:22

    Would you be able to attach this to the side of the desk and turn the VESA plate sideways to get the monitor further back on the desk? Or does it not rotate like that?

  • borts16 on 25/08/2021 - 20:35

    I have this for 27" Dell. Fits to edge of desk like others. Very solid, great price, would def buy again if I needed. I bought this model as I wanted it as close to the wall as possible.

  • Lyken on 25/08/2021 - 20:41

    i bought one but i neet to hook this on my caravan wondering if there a bracket to hook it for kids ipad?

    • Vavoom on 26/08/2021 - 09:09

      There won't be in the box. You'll need some kind of vesa iPad mount. Just look up vesa ipad on ebay or Amazon. There's heaps.

      • Lyken on 26/08/2021 - 20:48

        awsome thanks mate!

  • WheelieGoodTime on 26/08/2021 - 10:23
    +1

    Showing as $44 :(

  • Bills on 02/09/2021 - 13:31

    Just set this up with my Xiaomi 34" but it seems like the monitor is too heavy for the mount. Monitor slowly tilts downwards because of the weight. I've already tried tightening the bolts and screws as well.

    • pyr0maniac on 02/09/2021 - 18:53

      No such problems with my regular 32" monitor weighing ~7Kg. The Xiaomi is 8Kg if I'm not mistaken - that is at the upper limit of the stated capacity but I would think the stand should be able to handle it. Possibly a defective unit?

    • Zilch on 03/09/2021 - 22:55

      Mine has the same issue, except I've got a S2721Q and the tilt mechanism bolts appear to be soldered.

      Any ideas?

      • Zilch on 04/09/2021 - 09:38

        Wait dw, looks like you just need to use a bit more conviction than I was expecting on the other side where the hex key goes

Login or Join to leave a comment
Login Join