Void » user profile

6 6
Member Since 16/04/2019
Last Seen 5 hours 16 min
Location Melbourne

Recent Activities

I have this exact one and haven't noticed any noise out of the ordinary.
29/06/2022 - 12:10
Are these as reliable as lasers though? Every inkjet I've had in the past has crapped out very quickly.
25/06/2022 - 22:14
Hi guys, I am looking for a new printer as my Epson Inkjet has just stopped printing black altogether. Budget is $500 tops for a colour...
25/06/2022 - 16:05
Might be better off getting 2 access points like Ubiquiti Unifi or TP-Link EAP and connecting them both to a central router. That way there...
25/06/2022 - 15:13
Mesh is usually better at roaming. With just a repeater devices will often hang on to the first access point they connect to.
25/06/2022 - 15:12
I think that one's the full tower. When I checked the SFF was more in the ballpark of 380x330x100.
22/06/2022 - 10:40
Depends if you get Singapore Post or Cainiao/4PX/Ubi. Singapore Post takes at least a month because they have to stop in Singapore. My...
19/06/2022 - 11:32
Yep. You juts pry the side off and take the drive off the SATA to USB adapter. I'd recommend using a proper tool for the job so that you...
13/06/2022 - 14:15
Wouldn't that be the Lite? But yes, prices are definitely up. Pretty much all networking gear is out of stock or at a higher price.
13/06/2022 - 14:13
Ubiquiti Unifi U6-Pro Wi-Fi 6 Access Point $229.99 ($224.24 with eBay Plus) Delivered @ Sydneytec eBay
Revival of [this](https://www.ozbargain.com.au/node/702903) deal. Pretty good access point. Only flaw is the 1Gbps uplink, but at this...
13/06/2022 - 11:42
Picture quality sells. When you go into a store to buy a TV you never hear how bad it sounds, or see how slow it is. Smart TV manufacturers...
08/06/2022 - 10:37
Yes, and probably a lot more. Mine would only get 4MB/s in sustained writes because it would get so hot.
07/06/2022 - 20:07
I'm gonna be honest gigabit probably isn't that useful for a TV but it's like $2 for the manufacturer, might as well be gigabit. 100mbps...
07/06/2022 - 14:12
Because it's convenient. It's like the soundbar of Wi-Fi. You don't need to worry about wiring the other nodes through wall/powerline/MoCA....
07/06/2022 - 11:00
What's the point of 8x8 when it's all in the same place?
07/06/2022 - 10:59
Faster load times when streaming? Especially if you have a home media server that's already on gigabit.
07/06/2022 - 08:14
They were $49 at Centrecom so not the best price, but still pretty good.
06/06/2022 - 23:15
Also had bad experiences with Coles mobile. Terrible coverage and slow speeds where there is coverage. Boost has been much better.
05/06/2022 - 14:02
I agree that 1Gbps is not enough for AX5400 but I think it's perfectly fine for Wi-Fi 6. Wi-Fi 5 realistically tops out around 500Mbps on...
04/06/2022 - 15:55
3x3 is not going to be useful to most devices so the AX55 is just plain better unless you need the extra antenna for mesh.
01/06/2022 - 23:40
>Now has delivered to the AU fulfillment center, Will dispatch today:) The Gan3 charger has been delivered to the fulfilment centre or the...
01/06/2022 - 11:03
Why doesn't HDMI just run over RJ45 in the first place?
27/05/2022 - 13:50
My two work with both my Chromecasts almost perfectly. The annoying thing is that you need to click a button to wake it up for it to work...
26/05/2022 - 19:59
I agree with the IR. It's very awkward. My CCWGTV remote would work even pointed backwards.
26/05/2022 - 19:56
It said it was for 30 days after the invoice date. My invoice was issued on the 27/04. I know they're not obligated to honour it but I'm...
26/05/2022 - 13:27