Creality3D 235*235mm Soft Magnetic Heated Bed Sticker for Ender-3 US$9.99 (~A$13.89) Shipped @ Banggood

70

Affiliate

Go to Deal

Cashback

No on 17/09/2021 - 11:27 banggood.com (156 clicks)
Last edited 17/09/2021 - 11:39 by 1 other user

This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

• Upgrade Cmagnet Build Surface plate
• Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing.

Specifications:

Size: 235*235mm
Applications: For Ender-3

Package Included:

1x Top magnet plate
1x Bottom magnet plate

Related Stores

Banggood

• 

  DoesntEvenMatter on 17/09/2021 - 11:32

  +5

  Consider spending that little bit extra and getting a magnetic steel spring PEI bed instead

  • 

    ayayron on 17/09/2021 - 11:57

    Couldn't agree more for PLA

  • 

    Herbse on 17/09/2021 - 12:12

    +1

    any comparison to the glass ultrabase? i've had good luck using that recently but keen to know what new things are out there

    • 

      DoesntEvenMatter on 17/09/2021 - 12:25

      +2

      I haven't used the ultrabase to make a comment but from magnetic to carbon glass the pei is definitely a improvement also also fairly smooth. I use the twotrees branded one from aliexpress got them for about 25ish

    • 

      jez on 17/09/2021 - 17:08

      What's "glass ultrabase"?

      • 

        Herbse on 17/09/2021 - 17:44

        link

        I've found it works really well, the material sticks tight to it while the bed is hot and releases when it's cool. Don't need to use glue, hairspray or tape etc.

        I found that with other flexible bases, yea it's easy to remove prints but then I have to level the bed each time I take it off because it changes a little. This way the glass bed is always level and stays that way for ages. I haven't had to level it in months.

        • 

          DoesntEvenMatter on 17/09/2021 - 18:33

          @Herbse: It sounds like the carbon silica one that comes with the Aquila. It's a good base much better than glass or magnetic but the pei twotrees is still superior. Stick so well even over night cool down you need to flex the plate. Level wise don't need to do it every print especially if running a autolevel. I level my printer only during maintenance every couple months. Silicone coloums have made that possible

  • 

    jv on 17/09/2021 - 12:21

    +1

    link?

    • 

      DoesntEvenMatter on 17/09/2021 - 12:27

      +3

      AU $14.53 52%OFF | TWOTREES Upgrade Removal Spring Steel PEI Sheet Pre-Applied PEI Flex Magnetic Base for CR10 Ender Sapphire Bluer Hot Bed Sticker
      https://a.aliexpress.com/_mtum2Ux

• 

  ratoloko on 17/09/2021 - 13:39

  PLEASE DONT!

  This is the most sh1t sheet ever. Do yourself a favour: https://www.amazon.com/dp/B08PFHBR2D?psc=1&ref=ppx_yo2_dt_b_…

  On my Ender3 V2 I printed PLA+, TPU and PETG on that sheet like a charm.

  • 

    Cloudwarrior on 17/09/2021 - 18:55

    Is this one double sided?
    Eg. Has a smooth and textured usable sides

    • 

      ratoloko on 17/09/2021 - 19:51

      That one is a single side. But still, I wished I had it since the beginning.
      Be able to print PLA, TPU, PETG by cleaning the bed with IPA before each printing is everything.

      You should be able to find double-sided if you like.
      Just don't buy this Creality, I did and I hate myself lol