Hi Ozb,
So recently a hinge from an Allure Bathrooms cabinet broke after months of the soft close not working and slamming. Have uploaded some pics
https://files.ozbargain.com.au/upload/398528/91976/3855acc0-…
https://files.ozbargain.com.au/upload/398528/91977/c71b227b-…
https://files.ozbargain.com.au/upload/398528/91978/ed57212f-…
Contacted the place and they quoted like $100 +. Happy for alternatives too.
TIA
Thanks boss these look perfect
Make sure you take the old one in and try to compare them to ensure everything lines up.
The above two hinges are wrong. They are straight and will bind with the end panel. You need two inset hinges.
Don’t mix and match.
The hinge you have looks like a Chinese knock off
Of a Blum inset hinge.
https://www.bunnings.com.au/blum-107-inset-hinge-2-pack_p416…
Note the arm which is angled
It's stamped on it - 105 deg hinge. :)
https://www.google.com/search?q=105+hinge&rlz=1C1CHBF_en-GBA…
In the case of any 'unknown part' - google is your friend.
Just try to search any stamp markings, in this case '105 hinge' and "Bam the confusion is gone"… !
Inset 105
Yep!
Thats the next step for OP.
Once ID'ed, then take X part to X supplier and physically match! :)
Not the 'alt', 'fn', 'crtl' or 'num' key - but… 'insert'… and as Homer discovered, there isn't any, any key! lol
Press any key, haha Homer J
The hinge is in-set as it swings the door away from decorative panel on the end of the cabinet when it opens.
Looks pretty bog standard to me. You should be able to replace it with any of the same size, opening angle etc as long you replace both of them.
https://www.bunnings.com.au/hafele-105-soft-close-full-overl…
https://www.bunnings.com.au/hafele-105-full-overlay-clip-on-…
https://www.bunnings.com.au/hafele-salice-165-hinge-full-ove…