Bosch AdvancedAquatak 140 High Pressure Washer $359.25 Delivered @ Amazon AU

130

Affiliate

Go to Deal

Cashback

WSDtightwad on 19/03/2024 - 14:36 amazon.com.au (426 clicks)
Last edited 19/03/2024 - 15:29 by 2 other users

This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Bosch 2100W Electric High Pressure Washer Cleaner 2030 PSI Induction Motor, Lance, 8m Hose, Nozzles Included, Self-Priming Capable, Double Filtration, On-Board Accessory Storage (AdvancedAquatak 140)

Not the cheapest ever, but about as cheap as it gets.
8m hose, 2030 PSI rated, 2100w, heavy.

https://au.camelcamelcamel.com/product/B07QMKG353

Price History at CamelCamelCamel.

Related Stores

Amazon AU

Marketplace

• 

  2jzzzz on 19/03/2024 - 16:06

  This or the Gerni 5300 for $399? https://www.bunnings.com.au/gerni-5300-1885psi-2100w-high-pr…

  • 

    WSDtightwad on 19/03/2024 - 16:12

    Gerni has a lower nominated PSI rating, but you'd have to look at the actual PSI in the manuals/online for both.
    They are both 7.5L / minute machines… which is pretty good. And that's potentially a better measure than PSI.
    My bunnings says the Gerni is $499.

• 

  asmith84 on 19/03/2024 - 16:10

  Aldi is bringing one for $129 next week, with patio cleaner attachment.

  • 

    osmanumar on 19/03/2024 - 17:06

    Link please ?

    • 

      asmith84 on 19/03/2024 - 19:02

      I saw in the catalogue, they generally update the special buys section in Tuesday night, so please check their website tomorrow.

• 

  nakhe on 19/03/2024 - 17:25

  Does anyone have a solution/prevention for rust developing at the end of the hose that connects to the gun?

• 

  wonderboy4 on 19/03/2024 - 19:36

  Are these powerful enough for deep cleaning bricks and concrete, or is it better to hire one from somewhere?

  • 

    sobanault on 19/03/2024 - 20:41

    I have this and the patio cleaner attachment. It works well but wont get all the stuff out of the concrete/brick. I would say it gets it 75% of the way there. To get it spotless you would need something that basically destroys the upper layer and this wont do that.

    • 

      wonderboy4 on 19/03/2024 - 23:49

      @sobanault Thanks for the feedback. I was just thinking about the good results you see on those YouTube videos, where the guy rocks up and gets everything looking knew again. But it sounds like you really need to hire an industrial strength one for those results.

      Did you mean the really strong ones actually take material off the brick/concrete? Yikes!

      • 

        sobanault on 02/04/2024 - 10:11

        They do. Not much, just a thin layer if you do it right. But over time…
        I have limited practical experience with these, but have done some research before buying.
        So far it's great for my needs. Would probably be good if it was just a bit more powerful, but you would need to pay a lot more to get it. All in all, great outcome for the price.