• expired

EGO 56V 5.0Ah 45cm (18") Brushless Cordless Chainsaw Kit + BONUS Chainsaw Bag - CS1805E-P - $639 Delivered / C&C @ Trade Tools

120
4v69-fRzy-Tta9

This is a pretty good deal for the EGO chainsaw, and it even comes with a bonus chainsaw bag. I was deciding between this and the Ryobi 36V chainsaw kit, but from my research, the EGO tools seems to be a bit better, especially being 56V. You can use the promo code to get extra $10 off the price. The price is usually $799 without the bonus.

Features:
Easy Tensioning Chain System - World's First! Tensions chain with the twist of a knob
Bright Led Headlights - World's First chain saw with bright LED lights
45cm Oregon Bar & Chain - Clean cuts through large trees & hard woods
Brushless Motor - Power & performance of a petrol chain saw
Chain Kickback Brake
10,500 RPM’s: For Efficient Clean Cuts
Water Resistant Construction (ipx4)
Maximum Cut Diameter: 45cm
Double Guard Bar & Narrow-Kerf Sprocket Nose
Low Kickback Chain Design
1.3mm Gauge Chain with 9.5mm Low Pro Pitch
Reversible Bar

Related Stores

TradeTools
TradeTools

closed Comments

  • I got the 16" in this deal and am happy with it. Have brought down some palms with ease. I can't help but feel like it doesn't exude "high quality" in the hand, but that's the case with a few Ego tools I have.

    I am actually worried that the tensioning system will break on me one day - that's just plastic too.

    All in all it's a weapon of a chainsaw on dry hardwood.

    • +2

      Not all plastic is made equal, and some things like their mower decks aren't technically a plastic either. More durable than steel. Plastics and plastic-like materials can vary wildly in durability and quality, so that alone is no measure of quality.

      • Yeah I get that. But have you actually used the saw I'm referring to? I don't like the tensioner at all (it's different to the one in this deal) and worry for its longevity every time I use it.

        I still like and continue to buy Ego tools. I also think my opinion that they don't feel overly high quality is valid. This isn't purely due to them being made of plastic, each tool I have just seems to have a quirk about it that didn't seem like it had much thought in R&D.

      • The plastics are shit.

  • costco also have a 60v 5.0ah kit for $299 delivered. they got some other garden cutters etc. too. Their mower looks good, for $499 it comes with a 201cc honda engine.

    https://www.costco.com.au/Home-Improvement/Tools/Power-Tools…

  • I have the 40cm model and it has been great, it won’t replace a petrol unit on the farm or for commercial work, but for around the garden and camping (plus everyone else who borrows it) it’s been great. It does need the 5ah battery as a min, and it does rely on having a sharp chain to be effective, I carry a spare.

  • Buy the commercial one for $499

    Yea it’s not 18” only 12” but compatible up to 16” and for most people that should be plenty

    EGO CSX3002 56V 300mm (12") 20m/s Commercial Top-Handle Brushless Chainsaw Combo Kit

    https://sydneytools.com.au/product/ego-csx3002-56v-300mm-12-…

    • I was thinking about that one too but this is mostly for arborists. Look at the video — the battery sits around the waist or on the ground, and then the power cable connects to the chainsaw.

      https://www.youtube.com/watch?v=HsmTf99YUF8

      • I find it alot easier to use than other chainsaws especially if i'm on a ladder etc tbh and have used it on some decent size trees already!

        • Ah interesting. Do you know which blade/chain is compatible with this one? I might change my order :)
          I was very close to getting CSX3002 but I thought the battery setup is strange to me!

          • +1

            @mirovich: I actually emailed them yesterday to ask, waiting for a reply! will let you know what they say

            • @quikstix: I think I'm going to stick with the CS1805E. I'll mostly be cutting and chopping large trees. My understanding is that the CSX3000 is equivalent to 35cc, while the CS1805E is around 45cc. Also, the gauge chain is thicker (1.3 vs 1.1).
              Seems like CSX3000 is designed for pruning.

              • @mirovich: Yea I’m not so sure that petrol equivalent rating is accurate but yea do what you think works best for sure!

                • +1

                  @quikstix: No, they a little on the BS side for CC comparison, but the difference between the two is accurate. CSX with top handle is designed for elevated work.
                  99% of people are better of with a traditional rear handle.

                  I am on acreage, I find this 18" to be very capable at clearing downed trees, or dropping ones too.
                  I got three of the top handles ones in a weird redemption thing, never used one, just played with one out of the box. It was far from ideal for general usage.

                  I generally use it with a 7.5Ah to get a little extra grunt.

                  • +1

                    @snuke: Thanks for the feedback :) Ill be using the CS1805E on acreage as well.

                  • @snuke: Interesting, I have a mate with this 18" and its great no doubt (i previously have had 2 different rear handle and they were fine) I just find using this a bit easier… maybe its just me. Again though I'm not on acreage so only time I use it for large trees is when I visit some family when they need some stuff cut. Recently bought a new house and had ALOT to cut back including some of my neighbours trees and i think thickest was about 25-30ish cm and that was no issue

                    • @quikstix: Really…having both is the best solution I think.

          • @mirovich: CS1800 (18" Bar) uses a 3/8" Low Profile, 0.050" Gauge
            CSX300 uses (12" Bar) uses a 3/8" Low Profile, 0.043" Gauge

            CS1800 can go down to a 14" Bar
            CSX3000 is compatible up to a 16" Bar

            Owners Manual has this info. That said, the Aus owners manual are unhelpful in their change to metric for chain spec as no one uses metric for saw chains.

          • +3

            @mirovich: AG1600 bar went on mine (CSX3002), and I put an Oregon R56 16" chain on it. No issues.

        • The CSX3002 is a top handle saw designed for one handed work, many DIYers have ended up in ER using a chainsaw with one hand.

          Using a chainsaw from a ladder is another good way to end up in ER.

          • @OzBragain: Nothing like cutting above chest height, and of course no PPE too.

          • @OzBragain: give stupid people anything and they will end up in ER lol

      • +1

        I put mine in a backpack. As long as it's tight, you don't need anything fancy to hold it. It also means that you have better control over the saw by not having the battery weight attached to it.

      • +1

        It'll plug into the backpack battery accessory too. Makes the saw very light in the hand when you're wearing the battery on your back. The plug that usually plugs into a battery adaptor simply goes straight into the saw.

        I installed the longer bar in mine and it's fantastic for yard work with my two feet firmly on the ground. Some say it's dangerous to use these unless you're a trained arborist because of the handhold position etc, but I disagree. It's a very easy saw to control, and kickback is not as severe as many petrol saws. It's pretty stubby even with a longer bar, and the angular momentum just doesn't seem to be there should the tip bite into something. You should be careful using any chainsaws really, but this is just so useful. Pretty much instant stop when you take your finger off the trigger, let alone hit the handle guard stop.

        Edit: This is the backpack https://sydneytools.com.au/product/ego-bhx1006-power-56v-100… …ouch @ the price. I'm pretty sure I didn't pay remotely this much…but I may have bought it as part of a bigger kit.

        • How does it feel doing horizontal cuts with the handles close together?

          • +1

            @foonman: Well…it's never the best angle, losing all leverage onto the cutting edge and with the trigger handle then being on the right. I find myself rotating my hand on the grip and actuating the trigger with my thumb - if that makes sense. It's not too much of a chore, but I'm rarely cutting a straight up and down trunk or branch. I don't think you'd want to be felling a plantation with this!

            • +1

              @Banj0: Cheers, thanks! I guess I'll find out what it's like. I'll be mostly cutting fallen branches and ones hanging over the fences but with the occasional sapling that's a bit too close. I'll still have to get the out the one that blows blue smoke, makes a lot o noise and makes me feel like a man, for the bigger jobs.

    • Got one, cheers. I was needing a 5AH battery anyway. I got it from Trade Tools - the OPs coupon worked.

  • What is the run time on one of these. 5 to 10 mins before needing new battery? Average 15 to 30 second a cut, that's 10 to 20 cut before battery change?

    • +2

      How long is a piece of string?

      The type of wood and it's thickness have a massive effect on cutting time and work required to do it.
      As does the condition of your chain.

      Have a look on YouTube, you will see a bunch of reviews showing how much they can cut of the wood type they have.
      Project Farm has a couple of chainsaws videos where he shows the performance difference in hard and softwoods.

      • Thanks @snuke, I had a look on project farm and a couple of other video. Basically, this Ego which has a big battery will last no more than 10 mins of cutting time with soft to medium hardwood. Others like Ryobi that has 18/20V or 36/40V battery power only last about 5 mins or maybe less before running out of Juice. Battery chainsaw is good for occasional use around the house but I needed it for firewood splitting a few logs then its not suitable or I'll need to have a couple of sets of fully charged battery.

        • I have one, and generally use 10Ah batteries. I cut up a fallen gum tree that was VERY dry. I used one 10Ah and two 5Ah batteries over about two hours and hundreds of cuts.

          I would have refilled my 372xp easily three times on the same job, but the kicker is, in the past with the xp, it has taken me more like 3-4 hours to do the job. The ego seems to cut significantly quicker, plus my chain still seems sharp as, whereas the xp I HAD to sharpen every tree roughly. I do really miss the noise though haha.

  • +1

    I got the 40cm years ago for a bit over $200. Used it a few times.

    Dies the job. Not commercial rated in the slightest. But around the home its ok.

    PS: picked up some 9.0mah batteries of Temu for $65 each. They serm to be pretty good so far.

    • I've been wondering about those knock-off batteries. Have you used them in anything other than the saw, like a brushcutter or something where its running non-stop for longer periods?

      • Mower, blower, brushcutter, snipper, edger, hedger. You name it.

        They are fine.

        If i had to buy new EGO batteries again, id scrsp it all and go back to PETROL.

        • Good to hear, thanks for the reply.

    • Would live to know how you go with those too… Advice gratefully rec'd!

  • Have a 14 inch ego chainsaw didn't use it a lot and chain oil started leaking from inside I opened it up and the tube inside had perished so I repaired it. Now after a year the thing is playing up sometimes it works and mostly it doesn't when I squeeze the trigger the battery light comes on green but it doesn't power on. I'm getting the ozito 2x18v skin for $199 next.

    • You have a 5 year warranty on the EGO saw, contact them about it.

      • I second this. I’m not in metro, so maybe my repairer was just awesome, but the warranty jobs I have had were fast and no bs. I even got the vibe they would honour outside of warranty a bit too.

Login or Join to leave a comment