• out of stock

Einhell (Ozito) battery adaptor for Dyson V7/V8 $9.99 + Delivery ($0 with Prime/ $59 Spend) @ Amazon AU

660
Einhell (Ozito) battery adaptor for Dyson V7/V8 $9.99 + Delivery ($0 with Prime/ $59 Spend) @ Amazon AUAffiliate
Go to Deal
Cashback
makeyouryear on 04/10/2025 - 14:11 amazon.com.au (2921 clicks)
Last edited 04/10/2025 - 14:21
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Have an older Dyson vacuum and an excess of Ozito batteries. Figured a battery adaptor might solve my problems but a cost effective solution didn't seem likely, even less so after visiting AliExpress. Very surprised to find an adaptor available at this price on Amazon AU.

The Dyson batteries have a higher voltage than tool batteries like Ozito PXC (6s vs 5s) so I expect the highest setting will not be as powerful. That said, the current battery drains too fast for us to use the higher suction mode anyway.

Price History at C CamelCamelCamel.
Home & Garden Dyson Ozito

Related Stores

Amazon AU
Amazon AU
Marketplace
Sunton Tool Accessories
Sunton Tool Accessories

Comments

  • marshmall0w2 on 04/10/2025 - 14:19
    +6

    and an excess of Ozito batteries

    Where U think U posting bruv

    • makeyouryear on 04/10/2025 - 14:25
      +6

      Yes, I know I don't have nearly enough. Partner was over my shoulder so I had to play it safe.

      edit: hoping this will justify more batteries

  • makeyouryear on 04/10/2025 - 14:29
    +1

    Damn, unavailable now. Thanks everyone for coming out

  • Christian Pac on 04/10/2025 - 14:34
    +4

    Shame the deal only lasted barley 15min.

    • AdModnar on 04/10/2025 - 15:56
      +26

      oats no!
      that's ryely the case. Usually we can wheat a little while before they're corn.

      (and i'll see myself out)

      • Captain Yobbo on 04/10/2025 - 15:59
        +1

        You got an audible ha out of me. Well played.

  • ussenterprize on 04/10/2025 - 14:40
    -1

    Would it work on gen5detect?

    • FrontBottom on 04/10/2025 - 20:53
      +1

      No chance whatsoever ….. different voltage.

      • tunzafun001 on 04/10/2025 - 21:43

        There absolutely is a Makita 18v adapters for the gen 5. So make (3D print) / find an einhell version.

        No smarts in powering it up. Just a button switch making a connection to the battery.

        At lower voltage, it will spin slower…but… Run it in boost mode and it will happily chug along.

  • boxall on 04/10/2025 - 14:41

    Said one left but unable to buy.

  • BargainBobcat on 04/10/2025 - 14:45

    Good idea though, need one for other brand batteries…

  • Stingstang on 04/10/2025 - 14:47
    +2

    Got one of these, fantastic for extending the life of my V8. Anyone know where we can get a decent motor head? I picked one up from amazon but it cuts out after 5 minutes of work.

    • MiKaDo on 04/10/2025 - 14:57

      I have one, pm me if interested.

      • neonlight on 05/10/2025 - 10:40

        Would like to know where to buy one or you mean you got a spare?

        • MiKaDo on 05/10/2025 - 13:13

          I've got a new genuine spare motor which i don't need. Had a problem with my V8 but turned out to be the BMS and not the motor. Got it from the UK. Looks and feels exactly like the old one.

  • bargaineer12345 on 04/10/2025 - 14:50

    OOS

  • bdl on 04/10/2025 - 14:52
    +7

    Search on Aliexpress for Einhell adaptors, they work with Ozito.

    My frankenstein Dyson v6 is working well :)

  • tobia on 04/10/2025 - 14:55

    Damn I bought mine from vacuumspares and paid $30…

  • cristobaljamesy on 04/10/2025 - 14:56

    Nice find OP, anyone seen these for the smaller brother being the ol' V6?

    • willy000 on 04/10/2025 - 22:17
      +1

      I have the Makita adapter on the DC59, best upgrade ever, search on Amazon for your model and which battery you want to use.

  • PChinna on 04/10/2025 - 15:06

    Do you have any recommendations for an Ozito–Dyson V10 adapter? I’ve seen it priced at around $39.99 in most places, but I’m wondering if there are any reliable and more affordable alternatives.

  • cathole on 04/10/2025 - 15:33
    +1

    I've been using a similar one for a while, it's awesome

  • Hornpub on 04/10/2025 - 15:53
    +1

    good stuff i got makita one for my v6, also extra filter , works like wonder now

  • troyww on 04/10/2025 - 15:59

    Paid ~$28 for one and the Dyson V8 has never worked better . 3 screws to remove , very easy .

  • Captain Yobbo on 04/10/2025 - 16:02
    +1

    Saw these but had concerns about the voltage difference. I ended up with a replacement aftermarket battery, 4.6Ah for about $35. Last one worked for over 3.5yrs so seems a reasonable value proposition.

  • nwa on 04/10/2025 - 16:28

    I had one of these and it worked ok at first then started playing up, to the point it wouldn't work. Apparently I'm told the BMS is in the Dyson battery itself so that's why the adaptor plays up.

    • makeyouryear on 04/10/2025 - 17:20
      +2

      Yep, BMS in the battery. Same is true for all tool brands I know of except Bosch. I think this adaptor is little more than two wires with an LED along the way.

      • tunzafun001 on 04/10/2025 - 21:48
        +1

        It also has a low voltage cut out.

        The Ozito battery has its own BMS inside the battery….and unlike Dyson's…it has balancing and works.

        If you had issues, it would mean either your battery itself was dieing, or the low voltage cut out played up. …or being Ali Express…its probably just a bad solder joint.

        I've resoldered basically every product I have bought from Ali in the last 2 years. Some are absolute shockers.

  • Kiro on 04/10/2025 - 19:40

    Awesome find. Grabbed a DeWalt adapter

    • alext0413 on 04/10/2025 - 21:16

      Hi do you have a link for dewalt adapter ? After one for v7/v8 with XR 5ah battery. TIA

  • A 1 on 04/10/2025 - 20:32
    +3

    Tip - If you have a Dyson V8 or similar, with washable filters, then give them a wash as per the owners manual and allow them to dry thoroughly. You might find (like I did) that that battery you thought was on the way out is actually fine and it was just a barely visible build up of dust on the filters ristricting the airflow causing the vacuum to stop.

    • sean85 on 05/10/2025 - 05:33
      +2

      I also use the Ozito blower from the top of the vacuum where the filter is inserted to give all the dust a blast

    • neonlight on 05/10/2025 - 10:41
      +1

      Yeah already done this. In fact I did this not just the main filter also the back end and also the core filter which you need to dig in this is especially for V6

  • Ponsonby on 04/10/2025 - 20:32
    +1

    Bought this (as Einhell v7/v8) from Aliexpress for about $21 delivered 3 months ago - works very well with Ozito 2.5mah and 4mah batteries - compared to old Dyson battery, plenty of suction for a long time (even when on top setting although on top setting Ozito battery gets a bit warm)

    • tunzafun001 on 04/10/2025 - 21:51

      Use the 4ah (2 rows of cells).

      The 2.5Ah, and ironically the original Dyson battery are a single row and are not suitable in boost mode.

      Yep…. Dodgey Dyson sold umpteen million units not fit for purpose. He also didn't enable the cell balancing (so packs die prematurely). Anyone else would be doing jail time.

      • makeyouryear on 05/10/2025 - 14:40

        How dare you talk this way about the INVENTOR of the brushless motor, not to mention the ballbarrow

    • dwbr on 04/10/2025 - 23:13

      Question. Does the ozito battery is charged by the dyson charger or I'd need to connect it to the ozito charger? Does the dyson stay okay on the wall holder with the adapter + bigger battery?

      • makeyouryear on 05/10/2025 - 14:39
        +1

        Need to use ozito charger, won't fit the the wall holder

    • neonlight on 05/10/2025 - 10:42
      -1

      Got a link for that on Aliexpress? The one I bought does not work with 2.5MAh batteries they don't give enough output 3.5 and 4Mah are fine

  • makeyouryear on 04/10/2025 - 21:10
    +4

    For those that missed out, this is the cheapest I can find on Amazon at $19.99. Double money day but still not a bad price.

  • shangoz on 06/10/2025 - 17:13

    Ebay sell similar things but more expensive, but, compare purchase a original Dyson battery, still worth to try, so good now you can replace a battery and recharge it easily, hope Dyson can come out some idea so battery can be easily remove or add a few AA recharge battery.

    • makeyouryear on 06/10/2025 - 18:22

      Sadly no sensible amount of NiMH AA batteries has the power density for a vacuum. Even with a BMS Li-ion batteries are too dangerous for the user to be trusted to use suitable cells.

      In an ideal world there would be a shared connection standard, I think for now tool batteries are a good modular format and with these adapters a reasonable alternative. Ozito batteries can be had dirt cheap, chargers too, more than once I've seen a charger lying on the nature strip.

Login or Join to leave a comment
Login Join