metapii » user profile

Member Since 24/01/2014
Last Seen 11 hours 11 min
Location Sydney

Recent Activities

If you don't need the storage now, find a Kingston A2000 for under $150 and don't look back Otherwise the P2 is probably only marginally...
27/10/2021 - 11:57
There's an unused m.2 slot and an unused 2.5" bay you can use to add to the preinstalled 512gb m.2 ssd. If you add a 1tb drive, you will...
26/10/2021 - 21:32
So I had to go into the BIOS today and guess what? I can access and navigate the BIOS with my G915! I'm pretty happy about it! Just a few...
25/10/2021 - 14:41
Still... $200 for better cpu + ram seems worth it
25/10/2021 - 09:55
What temps are you getting with these settings?
23/10/2021 - 20:53
Try cpu-z
22/10/2021 - 12:08
Thanks, bought a stick for $45 with afterpay I figure the existing stick of ram is already single-channel, adding this one should in theory...
22/10/2021 - 10:41
Linus has heaps of videos, can you pls post a link?
21/10/2021 - 09:32
From what I understand, dual channel works best or only works when the RAM modules are the same, but you could give it a go and report back...
21/10/2021 - 09:29
On Crucial's website, the CT16G4SFRA32A timings are CL 22-22-22 which sounds quite slow Timings for the T-Force are CL16-20-20-40 according...
21/10/2021 - 09:27
How does it compare to this other 1 x 16GB stick I found on Amazon for $87.42? TEAMGROUP T-Force 3200Mhz CL16...
21/10/2021 - 09:23
If you're planning to game, I'd return it and get the RTX3060 model
20/10/2021 - 21:58
Thanks, I got it stable at 1400 mem, getting 40.5mhs
20/10/2021 - 20:45
Would these work well for VR controllers? I read that the larger capacity means the battery is slightly thicker, and the 1.2v sometimes...
20/10/2021 - 20:28
When I did this overnight, my wattage decreased from 95w to 80w causing a reduction in hashrate I had to reboot/wait for the laptop to idle...
20/10/2021 - 18:58
I had mine at 95w last night getting me 41 mh/s, but now it won't go above 80w and 35 mh/s for some reason... very annoying
20/10/2021 - 14:15
I figured it out, it's not necessarily just the VBIOS update to 2.06, there's also a firmware update v101a which needs to be applied to get...
19/10/2021 - 20:00
I'm using 496.13 and -400 / +1350 for core / mem I've elevated the rear to get better airflow the hotspot is measuring 67.4 degrees
19/10/2021 - 16:50
Thanks. How do you verify that you can get 95W? I updated the BIOS to 2.06 but the Excavator window still only shows power usage of 85W and...
19/10/2021 - 16:43
which TDP software is this? isn't it just a BIOS update to 2.06?
19/10/2021 - 16:24
What are you using to control core clocks and mem speed?
19/10/2021 - 15:47
In the same boat, no idea how to change core/vram speeds as controls are locked out using MSI Afterburner
19/10/2021 - 15:41