sempro » user profile

1
Member Since 20/05/2014
Last Seen 31/08/2021
Location Brisbane

Recent Activities

have you got a mobo, or not yet?
11/08/2021 - 20:12
depends on the bios/firmware version
11/08/2021 - 19:59
buy the card you like
11/08/2021 - 13:27
do all the PCIe x16 slots need to run at x16 speeds?
27/07/2021 - 19:58
can you work as a 'pharmacist' in a hospital and not retail?
22/07/2021 - 15:46
buy a splitter or a new mobo
14/07/2021 - 12:38
your best bet is to look at your bill for your rates and use a spreadsheet to calculate savings.
14/07/2021 - 09:55
are you overclocking? Could your windows install be corrupt?
09/07/2021 - 10:44
when it 'crashed' what did the 'BSOD' say?
09/07/2021 - 08:40
If no leaks (coolant or oil), steering rack not bent, or no airbags deployed and only cosmetic damage, then I would carry on. Deal with the...
06/07/2021 - 11:21
write 'DECEASED - forward to afterlife' and put it in mailbox.
29/06/2021 - 12:15
Good Luck
23/04/2021 - 13:56
i agree, physics says no
05/03/2021 - 14:13
future sultanas
05/03/2021 - 13:08
double check power connectors, especially the ones that go from PSU to Motherboard. Some pins from ATX 24 pin power connector could...
16/01/2021 - 22:26
back back rerun!
25/12/2020 - 05:48
^ this Just ask the agent outright, why is this property so cheap?
17/12/2020 - 13:58
Dynabolts are to be installed directly into brick or concrete. If you have timber wall studs, then you need a different fastener. Sounds...
14/12/2020 - 20:59
Back to $509 on website, with free shipping Nevermind, I didnt add it to cart.$529.....
27/11/2020 - 15:00
careful, might get unpublished...
30/08/2020 - 07:48
thank you for your contribution
12/08/2020 - 20:38
looks like a potential 'any' key
05/08/2020 - 13:52
buy new lock /thread
03/08/2020 - 09:20
the local cashies
28/07/2020 - 15:08
cool story /thread
15/07/2020 - 14:02
i guess you could say its my racket.
13/07/2020 - 10:34
how long is a piece of string/filament? But to answer your question 1kg of filament should be able to print up to 1kg of 'print/model'
29/06/2020 - 14:20
do you like projects?
19/06/2020 - 15:30