me3 » user profile

Member Since 01/11/2015
Last Seen 12/11/2018
Badges 1
Location SA

Recent Activities

Used easknights Mine http://swee.ps/xivHCiUeY
14/08/2018 - 22:12
+1 for save on it, grabbed mine form there also.
28/06/2018 - 11:09
[@homersimpson](/comment/6084808/redir): No, but I would urge you to consider mock outrage responses carefully both IRL and online before…
24/06/2018 - 11:37
[@homersimpson](/comment/6084626/redir): It's Jack and the Beanstalk you twats. Unbelievable, in this day and age of the PC snowflake the…
24/06/2018 - 10:42
Found this off the back of a search this post started, I grabbed one of these for the missus:…
03/04/2018 - 18:03
Thanks mate I grabbed one - price is ridiculous. This is from a comment below - "These are not safe (heatgun 858D) I bought one and the…
20/01/2018 - 11:56
Arguably, depending on the power supply design, a fault in the primary and secondary winding in the transformer could introduce 240 to the…
20/01/2018 - 11:51
As the iron is on the 24v side, I believe that they can be considered double insulated (plastic cased) - and thus not require the earth per…
20/01/2018 - 11:47
Magic The Gathering Oath of The Gatewatch Intro Set - All 5 Packs $39.95 + $10 Shipping @ Gameology
Magic the Gathering Oath of the Gatewatch Intro Set - all 5 packs $39.95 +$10 shipping @ Gameology Same as the recent Shadows over…
22/11/2017 - 21:08
https://www.gameology.com.au/products/mtg131_oathintro_b?utm_source=Gameology&utm_campaign=0aa879538f-EMAIL_CAMPAIGN_2017_11_21&utm_medium=e…
22/11/2017 - 21:03
+1 for P3D seems to have the best physics engine and all the common mods.
20/11/2017 - 18:28
Great deal, managed to grab one thanks.
16/11/2017 - 11:52
[@ninetyNineCents](/comment/5144105/redir): Actually, your statements are closer to a lie than anything Tuba has mentioned using broad…
05/10/2017 - 19:36
[@Hayesy22](/comment/5144559/redir): Sorry, typo - I have corrected now thanks.
05/10/2017 - 19:21
[@ninetyNineCents](/comment/5144098/redir): Actually, firearms related deaths were on the demise well before the introduction of the NFA,…
05/10/2017 - 19:07
Rate of fire does not determine if a firearm is automatic. Be careful when telling people they have no idea if you are going to make…
05/10/2017 - 18:59
Not targeted, got one from my local in SA.
04/10/2017 - 21:25
[@0xFFFF](/comment/4928627/redir): No problems, Craftware is more than fine for 90% of things in my experience. Well, that model certainly…
07/08/2017 - 13:06
[@Jangle](/comment/4915061/redir): I would agree with the no perfect settings comment, you will change settings and indeed slicers for…
27/07/2017 - 19:13
Consistency is key with filaments, happy to pay as the product has been great over time.
27/07/2017 - 19:11
[@0xFFFF](/comment/4914987/redir): Further, I have tried many mods with this printer, the below are the only ones I would recommend to…
27/07/2017 - 19:10
[@0xFFFF](/comment/4914987/redir): Hey mate, what was the model you were trying to print? 5 days is a long time. I have used all slicers,…
27/07/2017 - 19:02
Mine was here in under 2 weeks
26/07/2017 - 16:45
I have one of these. It is a great kit to learn the essentials of 3D printing but it is not plug and play. Many upgrades for this model…
26/07/2017 - 15:55
Start with PLA, these guys have good rolls https://3dfillies.com/ I have gone through at least 10, as well as a few PETG rolls
26/07/2017 - 15:50
Then there may be something wrong with your slicer, it is no slower than any other i3 clone.
26/07/2017 - 15:43
If you missed this one and are looking for a good cheap printer I can highly recommend the Anet A8…
19/03/2017 - 14:02
There are 3:1 positive:negative votes for this one, I think you have missed the consensus of the community.
20/11/2016 - 14:03
Loading...