Quarn » user profile

Member Since 04/11/2015
Last Seen 14 hours 20 min
Badges 2 3
Location Adelaide

Recent Activities

They all perform the same to me. The coloured with black look the best to me, but that's just looks only. You won't go wrong with any of…
18/07/2024 - 23:47
By a long shot, used one on a seized bolt recently and it was like a banana with the force required. I thought for sure the key would never…
18/07/2024 - 21:52
Just sign up with the new supplier, they move the contract. You will get emails from your exisiting supplier with balance.
03/07/2024 - 14:28
Is that a 4, 6 or 8 cylinder engine you are talking about? 🤔
23/06/2024 - 11:31
Not one use of the word 'hirsute', disappointed!
21/06/2024 - 23:52
On normal paper laser is actually better quality, ink soaks into the fibres and bleeds whereas toner is a plastic that is melted on to the…
20/06/2024 - 11:36
You are INKvesting more money up front for larger ink tanks, and you will be INKcredibly annoyed if they dry up before you get to use them.
20/06/2024 - 11:34
You can use Demineralised Water if you don't want any impurities. Available at Woolies, Bunnings etc
13/06/2024 - 15:04
Plane noise yes, babies crying is reduced but if not listening to music you will still hear to a degree. Over ear headphones step it up a…
12/06/2024 - 00:28
You should be able to load Klipper firmware onto your printer, no need to change control board.
23/05/2024 - 06:04
$163.34 BIGTREETECH Pad 7 with Pre-installed CB1 Core Board for Running Klipper. Will work with any 3D printer.
22/05/2024 - 16:07
Shoutout to a great seller, he is passionate about 3D printing and as sole trader does an amazing job. Having gone to his house to buy ABS…
16/05/2024 - 19:11
Nothing dubious, here are the actual rules https://www.casa.gov.au/knowyourdrone/drone-rules
03/05/2024 - 12:11
I would recommend the maul over the axe for splitting logs. Axe is prone to getting stuck and doesn't force the pieces apart enough to…
29/04/2024 - 16:32
I would recommend the maul over the axe for splitting logs. Axe is prone to getting stuck and doesn't force the pieces apart enough to…
29/04/2024 - 14:46
If we view OzBargainers like this then why post any bargains for people we view this badly?
22/04/2024 - 15:58
No it doesn't, not that I should say it. You can continue without making a donation.
22/04/2024 - 12:19
I'm not suggesting people do that, I highly recommend going for the ride and getting some sponsorship. Very enjoyable event. Free case…
22/04/2024 - 12:17
Free DGR x Quad Lock Phone Case for the First 200 to Join DGR Team @ The Distinguished Gentleman's Charity Motorcycle Ride 2024
RIDING FOR MEN'S HEALTH SUNDAY 19TH MAY 2024 Do you have a classic motorcycle or moped? Like to help a worthy charity? Like a free Quad…
22/04/2024 - 11:44
The initial pre-release had issues, they recalled it and modified it. Make sure you are not looking at those reviews.
20/04/2024 - 18:09
QIDI X-Max 3 3D Filament Printer $1239 Delivered from AU Warehouse @ QIDI Tech, China
This is a whole lot of printer for a great price, I paid $1600. Delivery may not be free to rural areas. Fully enclosed Core XY printer…
20/04/2024 - 16:31
With Companions I really enjoy solo, rarely team up. Each to their own I guess, at least you can play whatever suits your mood.
16/04/2024 - 12:13
Yes, this is a Prusa clone, well built with direct drive. Great for the price.
20/03/2024 - 16:26
Try the Fiskars maul, it's a beast
28/02/2024 - 21:03
I always compared it to taking a run and jump at wet ice, when it goes bad you fall hard and fast. Rang my bell hard a few times and…
24/02/2024 - 14:50
Samsonite rep warned me to avoid polycarbonate after my American Touristers cracked, cold cargo hold makes them brittle. The good material…
24/01/2024 - 19:40
What's are symptoms? Does do the first few layers ok and maintain adhesion throughout?
22/01/2024 - 12:06
Loading...