camel » user profile

Member Since 21/11/2016
Last Seen 5 hours 9 min
Location Gold Coast

Recent Activities

<opens ShopBack App because tracking is an important thing> Bloody good value for decent whiskeys. You can buy certain tins of premix to...
12/05/2021 - 15:53
It doesn’t? “ Matow 53mm Dual Head Coffee Distributor & Tamper”.... unless the link is wrong and/or description of the post.
05/04/2021 - 19:17
My two favs, both darker roasts: https://beanbay.coffeesnobs.com.au/ViewProduct.aspx/116-peru-ceja-de-selva-estate...
05/04/2021 - 19:16
It’s a tough one, the basket has a slight lip between the top depth and where you should be ramping. So you’ll always get some grinds...
05/04/2021 - 11:41
If you weigh your dose and you have a correctly set depth on the tamping side, you just need to adjust your grind based on beans. This way...
05/04/2021 - 11:39
Coffee Snobs gets a massive thumbs up from me. You can pre-order fresh roast so you’ve got it sometimes next day. As long as the beans...
05/04/2021 - 11:38
You don’t need a tamper with these. Weigh your dose each time, grind, distribute and tamp (with the tamper side of these). The known...
05/04/2021 - 11:36
If you do decide to try and use Shopback, check to make sure it's tracked. You shouldn't have to, but don't expect it to track properly.
26/02/2021 - 15:40
These guys never track. You shouldn't need to continually chase up tracking. Not to mention, the customer service is a scam, their live...
05/02/2021 - 17:52
G815 tactile owner myself. Love the keyboard, switches and the short travel. I didn't see any benefit in $$ for wireless. I've had wireless...
08/11/2020 - 13:00
Looks like the 350mls are gone :( I was deliberating and managed to get them just in time.
01/10/2020 - 11:49
I've run mine for a while with no issues. There are polycarbonate ones which I would avoid.
01/10/2020 - 11:46
Agreed, although you can make them fit. Just need to give them a little tilt around the spout and it'll fit.
01/10/2020 - 11:44
CL Timing:16-19-19-39 which suggests this is not Samsung B-Die, the model number for this is F4-3600C16D-32GTZNC. A Samsung B-Die kit...
22/09/2020 - 08:12
Just think of the e-peen points though!! I'm running the 2x 16GB 3600mhz 16-16-16 kit and it cost... a lot. Was the few extra fps worth it?...
09/09/2020 - 07:42
This is *not* B-Die. I would remove the mention of B-Die from the post body, this is misleading. B-Die: F4-3200C14D-32GTZN [DDR4-3200MHz...
06/08/2020 - 09:42
I did, that's why I don't have a UDM. It's such a new product that there's very little information out there. I at least would have...
02/02/2020 - 12:13
Ubiquiti support confirmed that the config.gateway.json file functionality wasn't implemented just yet.
01/02/2020 - 15:26
The main reason I was considering the UDM was because it's a FlexHD and CK all in one, also frees up some PoE ports. I have a complex...
01/02/2020 - 15:26
Just don't expect these to work like a FlexHD + CloudKey Gen2. You cannot turn off the USG component, if you like double NAT then that's...
01/02/2020 - 11:53
BX500 cakes it with sustained writes and with random read/writes....
31/01/2020 - 19:03
unlucky, did well with this sale it seems.
31/01/2020 - 19:01
Decent price, used the 3% off code because eBay Plus can EAD. Have purchased from these guys before, no issues. Purchased 4:30pm Shipping...
31/01/2020 - 19:01
You can probably flash them with OEM firmware to avoid having to install the Kogan app. I’m going to grab some and try my luck. These and...
06/10/2019 - 15:29
I ended up using live chat, took a full screenshot of the session id in the URL bar as well as the success message. Apparently they'll get...
08/08/2019 - 16:18
hsgfjhsgdfjhgsadjfhgasjdhgfajshgdfjsahgdf ....sad words
08/08/2019 - 16:03
*think* I got one ~10s early: https://imgur.com/a/9mSleWF Although, not showing in order history.... :'(
08/08/2019 - 15:59
Applies to Dogs >8kgs only, the rest are more expensive than this @ $22.50 with free shipping >$49...
02/08/2019 - 11:45