roller » user profile

Member Since 14/12/2009
Last Seen 23 hours 6 min
Badges 2

Recent Activities

I think that C report is a hoax as the C typeset isn’t correctly scaled to the rest of the text. Just a bit of photoshopping I think
15/07/2024 - 17:56
And it’s dead easy to get a 3 year statutory warranty repair on these name brands (LG, Sony etc) but might be a harder argument for such…
06/07/2024 - 11:13
Earplugs and earmuffs together are next level silence.
17/06/2024 - 16:44
Bambu’s are great but not for everything. One of my client uses a print farm of these for TPU. The Bambu/new gen printers are a waste in…
07/05/2024 - 15:54
The Apple version was going to let you put your devices down anywhere on the charging pad rather than nestle each device into a specific…
22/04/2024 - 21:39
The simpler explanation is the power bank burned their house down and the have nothing left to access Amazon with to leave a review ;)
22/04/2024 - 21:06
SOG is better in my experience. My original one is 30 years old and looks like new despite my regular abuse.
21/04/2024 - 21:26
If you need to mesh Unifi is better as the TPLink need the controller (Omada) running all the time somewhere on the network. In other…
20/04/2024 - 21:49
Generally this is everything the K1 printers should have been and better for warp prone and exotic filaments.
20/04/2024 - 21:39
If your only experience of 3D printing is Bambus you’re better off sticking with them as it’s easy. There’s a bit extra to know with…
20/04/2024 - 21:38
Speaking as someone who has used this style of laser, even proper glasses don’t give proper protection. With a 40W visible laser, if…
19/04/2024 - 02:43
I’ve gone through 3 of them in just over a year and I barely use them so no more budget humidifiers for me.
12/04/2024 - 00:01
Most “charge bags” I’ve seen only but you a few extra seconds before they too are past of the lithium fire.
23/03/2024 - 22:33
No bargain. Was $349 @ Wild Earth last week and $369.95 is their regular price.
11/03/2024 - 18:27
You really want a fibre laser for that kind of work. It works at a different frequency and is ideal for engraving metal (and cutting it at…
01/02/2024 - 01:19
A lot of extra risk to just install what is fundamentally free software anyway. Don’t do it and use the other free methods that are clean…
17/01/2024 - 01:55
I’m pretty sure a swappable tail that doesn’t automatically set current is not legal in Australia. It should not be possible by design…
26/12/2023 - 08:48
The onyx pro is an exception as a very different printer though with the impregnated continuous fibre giving crazy part strength in 2…
01/12/2023 - 23:58
You’re entitled to a replacement then. I expect Anker would help out there but if they don’t Australian Consumer Law protects you…
23/11/2023 - 13:26
As someone who’s built and advised on printers for 11 years and run a couple of significant print labs I’d say Bambu are about the best…
19/11/2023 - 22:09
Agreed. Their blurb is also all for the 5.5W model or excludes the 10W model in some specs. No questions its the true 10W model as they has…
10/07/2023 - 01:25
[Pre Order] Two Trees TTS 10W Laser Cutter Engraver $437 Delivered @ 3D Printers Online Australia
This is the manual adjust focus model with only 300x300mm cutting area. 10W is the laser output as Two Trees doesn’t usually do the dodgy…
09/07/2023 - 16:14
Not even close to cheapest for a 10W. The Two Trees 10W one is only $437 from 3D Printers Online Australia (bricks and mortar store).…
09/07/2023 - 16:08
This is a reasonable choice because it’sa small investment and the linear rails design help keep it in tune which tends to be one of the…
07/05/2023 - 14:20
I deal with a 50+ printers a year. At that sample size I can tell you a lot of customers just get put in the too hard basket and ignored.
07/05/2023 - 14:18
Thing is, such behaviour is pretty much standard for all the budget 3D printers. I've seen the same behaviour from Evnovo (Artillery),…
06/05/2023 - 19:06
Good little printer for a first timer. Overall simplicity in a robust design gives a lot less to go wrong and troubleshoot than something…
06/05/2023 - 19:03
Check around the reviews. Pretty much all the whitegoods beans have warranty support which is atrocious now.
11/03/2023 - 20:46
You also only get a limited number of transfers (from memory only two) with a retail key before it stops activating. You can get a one time…
28/02/2023 - 17:50
Loading...