alengcm » user profile

Member Since 17/07/2018
Last Seen 5 hours 17 min

Recent Activities

7th generation is not eligible for update. This laptop shouldn't be slow. Do you have an SSD?
21/09/2021 - 10:03
Can a Dell Inspiron 7567 take advantage of it's full potential?
19/09/2021 - 22:44
It does.. but I'm talking about the end of the ptfe tube where it hits hotend. The spot where most the clogs form.
13/09/2021 - 15:57
Unless the ptfe tube is cut perfectly and leave no gap, there's no way to prevent nozzle clog on stock extruder. All metal hotend also...
12/09/2021 - 13:29
Do you have an all metal hotend? Get one of those with no supporting screws. A bad clog is the reason why I changed mine. I run the stock...
11/09/2021 - 22:58
Generic all metal hotend (titanium heat break they say). I placed 2 orders from 2 different sellers from ebay and aliexpress. I put the...
11/09/2021 - 20:20
I have the aquila. I haven't replaced any of those things you mentioned. But I've an all metal hotend and a new printed fan shroud for that...
11/09/2021 - 20:08
Car next door. Looking for any kind of opportunities to loot money from car owners and riders. Myself had a horrible experience that their...
26/08/2021 - 22:07
Design, app, service etc are subpar (even their debit card looks worse than woollies reward card). Everything just takes 5 times as long...
11/07/2021 - 22:07
I have over 50,000KM on motorbikes and did some pretty stupid shit as well. There were close calls other than a couple it was me pushing...
01/06/2021 - 23:50
I make it myself there's no other way around. It takes a minimum of 1.5 hours to get it done. Having a mixer helps a lot.
18/04/2021 - 23:48
Today I had beef biriyani, left over from yesterday and some fries. Almost all the days it's either beef/fish/chicken + rice/kerala porotta...
18/04/2021 - 21:46
It depends on the store and the person who makes it. The one next me sucks big time (I still buy from them for convenience half the time).
29/03/2021 - 22:43
I didn't think of that. I thought somebody else could have that :D
11/03/2021 - 22:02
Shield pro or Xbox series S. People are selling xbox series S here at around the same price. Which one would you go for?
11/03/2021 - 13:09
How does the power of graphics card compare against the one in Xbox series x? I did a bit of research and found that this one has about 11...
09/03/2021 - 14:35
still there.. Go from home page to that link.
05/03/2021 - 11:00
I can repay. It's the savings that I don't have due to an impulse motorcycle purchase and the rest going to deposit.
22/07/2018 - 16:48
280 for the house.. repayments need to be worked out should be around 1200 or near. Might charge the room from 160 -200 including bills a...
22/07/2018 - 16:41
Don't want no bitches in my house! :D
20/07/2018 - 16:19
yeah.. I don't want stuff I don't need. I will go slow about it. Thank you
20/07/2018 - 16:16
How long it took you to source all that? I'm not in hurry.
20/07/2018 - 16:15
Yes. I'm interested. Can you send me the link?
20/07/2018 - 14:17
I should start this business. I'm good with electricals and electronics!
19/07/2018 - 12:08
[@tshow](/comment/6170365/redir): By thick solid wood furnitures I meant farm furntiure style.
19/07/2018 - 11:59