bradl822 » user profile

1 1
Member Since 27/03/2020
Last Seen 2 hours 32 min

Recent Activities

It's good to hear that it's jumping back. Still not for me, my current rates are under 1%
18/10/2021 - 19:17
Only thing I would add is start with a rust converter to treat the rust then clean, prime, paint.
17/10/2021 - 13:21
Like I said it's sales based, mine is far lower, I just suggest making a few calls to see what you can get. Also per the terms tyro reserve...
16/10/2021 - 23:50
I find live EFTPOS the best rate. It's obviously sales based but I couldn't get anyone within .3%
16/10/2021 - 23:01
Photos? If it's rendered then it could happen very easily, especially if not applied properly originally. I would see how the repair looks...
13/10/2021 - 20:02
Regardless of price I would never accept this is a drill, if you were drilling into steel and had that kick happen you would likely snap...
12/10/2021 - 07:58
Not sure if wind ratings sorry, I don't believe any brands have been tested
04/10/2021 - 18:57
The oldest I have dealt with is about 12 years and was still running very well, they were a white colour and has not noticeably faded. As...
04/10/2021 - 18:56
Definitely go aluminium shutters then, no matter what anyone trys to sell, a mesh awning will not stop the water and are typically only...
04/10/2021 - 16:57
That's all good. Aluminium are fine for indoors also, typically a bigger span then basswood also. The only reason I prefer the timber is...
04/10/2021 - 12:33
Not sure on your area but anyone that provides the following would be my recommendations. Uniline shutters, good flyscreen options for both...
02/10/2021 - 23:02
Did the electrician say anything about the fitting being damaged or faulty. If they say it's fine I don't think you have much push back. I...
29/09/2021 - 08:10
It's purely a frame designed for blinds to be mounted inverted or overhead. Hence this makes them suitable for tilt and turn. One example...
25/09/2021 - 00:59
Cellular/whisper/honeycomb blinds in a skylight frame. Will handle the windows best. Venetians as a secondary option with hold down clips,...
24/09/2021 - 19:56
Have you found any companies that will do off road recovery? I didnt think anyone would.
16/09/2021 - 21:55
Didn't know this was a thing, I joined NRMA a few years ago so I could get into 'my' car. I had no issues then.
16/09/2021 - 21:53
And rebates, always rebates
14/09/2021 - 18:35
bradl822 was awarded a badge.
14/09/2021 - 18:35
Maybe send the photo to a few roller door companies, you can replace individual segments. Also how were your previous experiences with the...
12/09/2021 - 08:03
You can feel the difference IMO, most ergonomic chairs feel more sturdy. Also most have an AFRIDI rating which would coast a fair amount I...
12/09/2021 - 07:58
Now I feel bad again, thanks.
11/09/2021 - 16:23
I'm ok now, thanks for asking yesterday
11/09/2021 - 16:08
Mate of you're still stuck on #2 then you should prob go see the doc
11/09/2021 - 16:07
The only additional thing I would do is plug an obd tool in to ensure no error codes are switched off. I'm amazed how many cars I have gone...
07/09/2021 - 18:15
Agreed no good for small screw supplies. Lid is to flexible, items don't stay in the same compartment they started in.
06/09/2021 - 14:51
Miss Daisy over here. How many k's are you doing
04/09/2021 - 23:11
I would take the return and pay the postage, it sucks from your end though. If they listed the particular feature on the listing them an...
04/09/2021 - 19:04
The last time i went was 3 years ago and definitely got a cookie. I don't remember if it was Byron bay though...
31/08/2021 - 20:32