tsuiso » user profile

Yeah that's what I'm gonna wait for hopefully a 4070/80 and Zen 3 Ryzen somewhere

even disabling the RTX, over 100 undervolt and best cpu setup for power saving I'm not getting close to 10hrs, whats your setup

yeah have been since release, keeps UV

also the latest alienware CC update has fixed it not working for everyone.

1.10 retains undervolt etc etc

yeah i did actually well noticeable but depends on what you use it for

https://www.megabuy.com.au/gskill-ddr4-3200-16gb-single-channel-sodimm-ripjaws-ddr4-p1260611.html have 2 of these.have read others where…

i have 32gb, I used the ripjaw 3200mhz kit, runs at 2933 cost under 300 from memory.

go into the service itself settings and check

now man up and go conductonaut!! and I also redid the thermal pads with thermal grizzly as well as some other things I padded. Just do a…

can turn off driver updates for windows update in group policy

scroll up i posted a fix in the comments

can confirm USB C to HDMI @1440 @60hz though.

and g sync obviously

I think now with 1.8 they have it fixed, wish I could get a stock one again and try it fresh with 1.8 TBH with the IETS GT300 cooling pad…

copper so redo after some time then its settled. I've thought about hitting dell up for a cooler to then send off and get nickel plated.

https://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverid=64c9j&oscode=wt64a&productcode=g-series-17-7790-laptop Install…

yeah and with the HDMI as well I run 2 external monitors plus the screen on mine all 144 refresh.

https://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverid=64c9j&oscode=wt64a&productcode=g-series-17-7790-laptop Install…

can confirm

so who has tried 1.8

I'm nervous as it cant be reversed haha

Soooo anyone wanna test 1.7 for undervolting?

also to add I am overclocked and locked boost @4.2 constant so I am stressing this as hard as it can go.

okay for the absolute best cooling pad for these. like with mine 40 degree idle 70 max load CPU, 40 degree idle 75 max load GPU get the…

what do you need? there is an easier way then that initial how to undervolt.

what trips the 300mhz is "temp3" which according to dell is the tjtemp (thermal junction between cpu and gpu).

it doesnt

bios 1.6 doesnt effect undervolt (just did it)

https://drive.google.com/file/d/1G3T_-0gx6hZ1iTqnAxuUTWvArgbu7Jg1/view?usp=sharing NEW LINK for disable/enable the RTX