MuddyRubber » user profile

Member Since 15/06/2022
Last Seen Hidden
Badges 1
Location NT

Recent Activities

> I trust Optus as much as I trust Qantas and Medibank.
09/10/2025 - 20:11
Watch me spend $700 on a 3D printer so i could save $3
17/09/2025 - 07:13
This 210W 20000mAh is 590g, 15.2cm (L) x 5.7cm (W) x 4.4cm (Th) Can't find an Iniu in a similar style/form factor, only these: Anker 737…
02/09/2025 - 22:59
doesn't TPG own iiNet? i guess it's ok since they apologised
20/08/2025 - 23:26
Bought mine in 2016 and just soldered Kailh switches when it started double clicking in 2019. Followed a guide from reddit. It was my first…
18/08/2025 - 19:54
900x400 is $16.58 +$49 for the shelf is $65.58 Disapproving look from the missus, priceless
18/08/2025 - 19:40
when some legislation takes effect in December
05/08/2025 - 19:18
No reccy for a da polisher but in case you're serious I wouldn't use an angle grinder (rpm too high)
12/07/2025 - 11:58
Arlec uses bad caps though and mine started clicking around the 1-year mark
11/07/2025 - 09:32
I'd get one to check out the ceiling / crawl space and roof
09/07/2025 - 12:04
Is it close to what the description says? 10 secs is bearable vs mucking around with a cable
22/04/2025 - 14:40
Op would rather pay for this deal twice and put the wife in the other room
17/04/2025 - 22:22
Cheap caps like the Arlec PC191's
04/04/2025 - 10:22
Earpads can be replaced and are like $20-$40 in case you didn't know
25/02/2025 - 18:56
It's 65W total output across two ports One device will not be able to draw more than 45W
09/02/2025 - 11:14
The cheap capacitor they used fails easily on these and causes it to switch off by itself or switch on/off in a loop
07/02/2025 - 20:12
I use a Horaco 2.5GbE Managed Switch (8 x 2.5GbE + 1 10Gb SFP+)
03/02/2025 - 21:11
Loading...