Froglotion » user profile

Member Since 29/06/2022
Last Seen 12 hours 12 min
Location NZ

Recent Activities

I have a 7 and haven't changed the cap yet. I just wipe it down so it's clean again. Seems hardy enough material that it should last.…
26/08/2025 - 20:07
Yeah quite likely subjective. I think if it was too bad, it would be more pronounced in reviews. Gen 3 and gen 4 have square sub pixel…
19/06/2025 - 18:31
Gen 2 is 240hz, gen 3 and 4 don't look to come in ultrawide yet.
19/06/2025 - 16:06
I don't think the text fringing is too much of a big deal. Considering Tim at Hardware Unboxed has used one (previous version) as his daily…
19/06/2025 - 16:03
I don't think they make one. Need to go ~~QHD~~ 16:9 from my research to get newer gen screens. These ones at least have improved heatsink…
19/06/2025 - 13:53
I wouldn't buy AM4 today, better off with AM5 and maybe a 7600X or similar. Then you can upgrade CPU later. This CPU is great for people on…
17/08/2024 - 18:06
Nah Intel are pushing their chips to the limit to compete, so they gobble up power. I really depends what you want the chip for and the…
01/03/2024 - 17:47
The cable you mention is just showing that it comes with the newest revision cable that some Nvidia cards use. Corsair doesn't mess around…
30/12/2023 - 20:28
Sorry didn't see the notification that someone had replied. If I was looking at 13600k I would also be looking at the AMD 7600, much better…
19/10/2023 - 05:24
Unless you already have a system for the 13600k, AMD all the way, you have an good upgrade path unlike Intel.
11/10/2023 - 17:03
Can confirm that kids don't know the difference between edible and non-edible. Better order myself some more...
18/04/2023 - 13:11
Uses batteries up relatively quick, but i've thrashed my sander and it goes well. Sanded my 50sqm deck last season. Super handy for my…
19/01/2023 - 12:57
Got one as my first printer, followed step by step youtube tutorial for the build and it's been going great. Only problem is you find out…
28/11/2022 - 17:57
What do you run that needs 1.5V? I have everything battery powered in my place running off rechargeable batteries.
27/10/2022 - 10:04
I've had this one a few years now, it's miles ahead of your usual junk drill presses. Speed control that stays constant when drill, on the…
12/07/2022 - 18:40
Maybe when they first started they were made there, certainly not now, it's made in many countries.
29/06/2022 - 12:33
Froglotion joined OzBargain.
Welcome aboard!
29/06/2022 - 12:30