scooter » user profile

Member Since 11/06/2011
Last Seen 08/03/2024
Location Melb SE suburbs

Recent Activities

Yep, shower with them all the time. Haven't seen any degradation to the exterior over a long period. Heavy sweating when working or…
05/12/2021 - 18:57
Have had Aeropex for nearly 2 years now, but on my third pair - both previous pairs replaced under warranty due to developing driver…
21/11/2021 - 12:34
Changing the eq to the alternative setting (holding vol + and - at same time for a few seconds whilst something is playing, from memory)…
21/11/2021 - 12:09
Some bike shops had an Aftershokz demo setup where you can test a pair on the shop counter, if in Melbourne 99 Bikes in South Melbourne or…
21/11/2021 - 12:04
Have had these Aeropex for 4 months and very happy with them, mainly for podcasts. Haven’t swum with them but they are fine under water…
24/04/2020 - 20:57
Roundup (glyphosate) works best when plant is actively growing. Apply to plant’s foliage.
05/01/2020 - 15:30
Strongly recommend shopping around for this style shown below, only ones I have found that don’t let go under duress:…
04/10/2019 - 20:19
Anaconda bike you link to is considerably inferior in spec to the Aldi bike. Anaconda - lots of steel (in this case read heavier) bits,…
28/08/2019 - 19:39
Much as I like Australian made, as a former contractor I’d buy a tanaka style head every time.…
06/07/2019 - 21:52
eediot, there are some useful guides on the net to getting better coffee from a moka pot, of which the Bellman is a variation. Here’s…
05/07/2019 - 18:35
Usually 13g of beans for single and 18g for double for me, also got a triple that takes 24g. Highly recommend the already mentioned set of…
15/06/2019 - 17:43
Surry scrimshaw, missed your q. It was the g-85 that we’ve found a good thing. 👍
12/06/2019 - 15:22
Yep, still have. My return and fix through the good guys was only last week. I found out the service agent they sent it to (Balwyn,…
12/06/2019 - 15:14
Go back to the retailer and deal through them. Regardless of the mfr warranty machine should last a period of time commensurate with its…
11/06/2019 - 17:37
Had heard about batteries dying on these units, I just recharge it for only 15-20 mins then store it for next time. Have a theory that…
31/05/2019 - 13:40
Can vouch for the GUB type holders. All anodised aluminium, well made and finished. There are several GUB models, have the one with the…
24/05/2019 - 13:19
$50 Milwaukee is limited, once gone batteries will continue to be accepted for at least the duration of the trial.
24/05/2019 - 13:01
Or buy directly from the roastery in Enterprise Ave Berwick, Vic. No affiliation, nice coffee though and friendly service from the lady…
14/05/2019 - 06:28
Not the cap gun I had as a kid... That one used gunpowder.
19/02/2019 - 17:38
Taiwan is actually a good place to source cast and forged tools 👍
10/02/2019 - 09:40
Variable shade, replaceable batteries, 2yr warranty, bigger viewing area, quicker response, sensitive enough for low ampersge TIG, 4…
15/01/2019 - 07:05
Toimr2, did you use turbo tape - that was the goods! Typed the whole thing in assembly language, took a couple of days, copying out of APC…
23/11/2018 - 20:26
Ring outside their office hours and leave a detailed message about what you’re interested in, and ask for them to return your call. When…
09/10/2018 - 07:50
Also try your local Aldi, they had the same thing very recently for ~$15 and had stock still several weeks after the promo.
08/10/2018 - 21:30
Loading...