thorman » user profile

Member Since 24/04/2013
Last Seen 21 hours 50 min
Location melbourne

Recent Activities

Yes you can.
27/12/2020 - 23:03
Not a hotbox with 2 x 140mm front fans.
15/12/2020 - 16:49
They're much quieter than normal case, worth it for some people. I would also put another fan in the front of this case if I bought it, to...
23/11/2020 - 04:23
i have the b350 version of this board and the usb 3.0 header socket came off too, the usb 3 header still works though.
15/11/2020 - 03:08
Can you fit 140mm fans at the front? I only see 120mm fans listed in specs for the front.
06/11/2020 - 21:43
I have this case and depending on the fans it's inaudible - especially if you mount the front fans as seen in the pic instead of in the...
29/10/2020 - 07:05
155mm but I have this case and I think it can take up to 158mm, 160mm would probably work because it's no TG so you can just squash the...
29/10/2020 - 07:01
If your uefi fan control software is sophisticated enough(let's you use more than 3 points on a fan curve) you can set it to completely...
10/10/2020 - 10:26
Arctic lists 2.8v starting voltage on its website. That would be 23%, I have be quiet fans that spin at 280rpm with 28%....
05/10/2020 - 08:31
You can use argus montior to test the spinup voltage in windows, you should be able to do that in the bios too though? 43% dc is 5v, almost...
04/10/2020 - 16:10
my asus b350 board does both except for the cpu fan header which only does pwm.
30/08/2020 - 04:25
I have this drive. It's a good solid sata drive.
19/07/2020 - 08:23
I got this kit a few weeks ago. It's micron rev e and goes to 3800mhz easy, I haven't tried higher.
17/07/2020 - 13:05
Not worth it considering the price of c16 3200mhz. Maybe you get lucky and it's c-die samsung that can overclock to 3600mhz+ but whatever.
06/07/2020 - 00:03
Looks like it's micron rev E so should be a good overclocker/timings will go tighter. cl18 is equivalent to [email protected] so looks like a...
21/05/2020 - 19:26
You could get a x570 and 3300x if you wanted to upgrade cheaper now then get a 4700x when their prices drop a little.
17/05/2020 - 02:14
Performance is fine without the DRAM that's not why it sucks it's the firmware, at least on the BX500 240Gb drive. Lasts for a few...
07/05/2020 - 15:49
Yes slightly worse than normal [email protected] timings, still it does run at XMP 3600mhz which is pretty useful especially for Ryzen.
19/04/2020 - 19:37
I had the same problem. Using them as a steam drive now and they last much longer before performance degrades, and when it does I can just...
09/04/2020 - 12:22
Yes the longer I wait the better the quality of the silicon and cheaper. No way I could say no to a new [email protected]$.
04/02/2020 - 22:48
Must resist urge to upgrade my overkill for my purposes 2600.
04/02/2020 - 20:04
8 Gb A-die (25 nm) / 1 die Manufacturer SpecTek Part Number D9SRJ (MT40A1G8PM-083E:A)
25/01/2020 - 07:08
I got this in the last deal, my motherboard can't cope with 3200mhz+ ram so I run it at cl14-3133mhz.
24/01/2020 - 20:40
Actually at 200$ this isn't competing with the zen 2 cpu's at all it's competing with the 2600/2600x/2700 and for that this was a great...
10/11/2019 - 19:04
I got an aftermarket Snowman cooler for 30$ delivered and it easily beats any ryzen box cooler, you could probably find a better performing...
09/11/2019 - 19:59
Only slightly faster in multicore, much slower at everything else.
09/11/2019 - 19:56
Yup for a lot of people 3800x is worth it over the 3700x.
24/09/2019 - 22:20
I got a 2nd hand b350 gigabyte d3h motherboard for 80$ off ebay. Don't consider the a320 you'll want to overclock the 2600 to 3.9ghz at...
24/09/2019 - 19:39