This was posted 7 years 8 months 3 days ago, and might be an out-dated deal.

Related
  • expired

Poolrite Triphibian Pool Cleaner - $29 + $12 Shipping - PoolAndSpaWarehouse.com.au

120
Poolrite Triphibian Pool Cleaner - $29 + $12 Shipping - PoolAndSpaWarehouse.com.au
Go to Deal
Store Reppoolspa on 23/08/2016 - 10:51 poolandspawarehouse.com.au (527 clicks)
poolcleaner29

Poolrite Triphibian Pool Cleaner - Head Only

Save $90 today and get a sturdy, dependable and efficient pool cleaner

The Triphibian is made in Australia by Poolrite, a large and renowned pool equipment manufacturer established in 1978. It performs quite well - it is efficient and durable.

Benefits:

  • Thorough: Thanks to its unique rotating vacuum head it is particularly good at cleaning hard pool surfaces.
  • Manual Mode: With its innovative quick attach/release adapter (supplied) you can easily use a telescopic pole to direct the cleaner to hard to reach areas.
  • Durable: Built with Durable UV Resistant materials and proven Baracuda technology.
  • All Pools: Suitable for all pool surfaces. Works in above ground and in-ground pools. Hooks up to any skimmer box.
  • 1 Year Warranty.

Notes:

  • This is the "Head Only" Version. It doesn't include hoses. You can use your existing hoses, or simply order new hoses when placing your order. It takes standard baracuda hoses.
  • To redeem this offer you must enter the promotion code "poolcleaner29" during checkout.
  • Only 100 units are available for this offer. Maximum one per order.

Shop the largest range of pool cleaners in Australia at the best prices - Pool & Spa Warehouse

Home & Garden Pool Cleaner Poolrite Poolrite Pool Cleaner Triphibian

Related Stores

Pool and Spa Warehouse
Pool and Spa Warehouse

closed Comments

  • [Deactivated] on 23/08/2016 - 10:58

    I've got the Great White but it mainly stays in the deep section and doesn't do the walls. Will this be better or worse?

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 11:00

      what is the surface and size of the pool? how old is the great white?

      • [Deactivated] on 23/08/2016 - 11:03

        1 year old, just a little 5m x 2m

        • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 11:05

          what type of surface does the pool have?

        • [Deactivated] on 23/08/2016 - 11:07

          @poolspa:

          It has mosaic tiles

        • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 11:13

          @LoopyLou:
          The Great White would mostly do floors only. Tiles are slippery and many cleaners would struggle. We would recommend the Zodiac MX6 or similar.

        • StopGap on 23/08/2016 - 11:23

          So this pool cleaner is not suitable for tiled pools?

        • [Deactivated] on 23/08/2016 - 11:25

          @poolspa:

          Thanks OP, at this price I might give it a try anyway!

  • durian797 on 23/08/2016 - 11:25

    I just bought one from you last week for $99 :(.

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 15:48

      we would be happy to work out a deal on your next purchase. Contact us before placing an order.

  • Krazyy on 23/08/2016 - 11:27

    what is the best cleaner on the market? pool size is 8m x 3.8

    Note: it is a fibreglass pool.

  • YatteYattah on 23/08/2016 - 11:32

    Would this be suitable for an 11m x 4m fiberglass pool with steps? Will it clean the steps as well? Can you provide a link for the right hoses please?

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 11:52

      is suitable, but will probably not do the steps. These are matching hoses

      • YatteYattah on 23/08/2016 - 12:20

        Can i use the hose that came with the hand vac, it is a 38mm (internal diameter) hose?

        • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 12:24

          if it is a baracuda style hose (which are 38mm), then it should be fine.

  • monstermash on 23/08/2016 - 11:34

    I bought a Onga Hammerhead Pool Cleaner (Above Ground Wall Climber) from your Hornsby shop for my 9m x 6m in ground fibreglass pool. I have had a lot of trouble with this pool cleaner with the head getting stuck around corners, at the hyrostatic valve and the hose knotting itself. Lately the head does not swivel freely in water also leading to trouble. Fed up with it , I can only run this cleaner on the weekends when i can supervise it and at times have to drag it to clean certain areas . Will a cleaning head like this help alleviate the problems i have been having? Thanks in advance.

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 11:50

      Thank you for your feedback. Unfortunately, all pools come with different shapes and especially fibreglass and tiled pools there can be very tight corners. You may find that on other fibreglass pools the hammerhead is perfect. In your situation, we recommend a mechanical suction cleaner as these cleaners have a reverse gear that will get the cleaner out of any corner. Call us on 1300 766 619 to discuss. If your purchase is recent we would be happy to work out an upgrade to a better suitable cleaner.

      • monstermash on 23/08/2016 - 12:02

        Thanks for you reply. I think its been about a year since I bought this cleaner. Can you still work out an upgrade option to the MX? The onga is getting a little to frustrating to use. Thanks in advance

        • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 12:10

          We should be able to work something out… however, we were actually thinking about fitting a deflector wheel. If you didn't buy one, we would be happy to ship you one and see if it resolves the issues. Call us, or send us an email with your details so that we can organize it.

  • [Deactivated] on 23/08/2016 - 11:48

    Can you check out as guest? Can't see where to enter code…

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 11:53

      you can check out as guest. You can enter the coupon code on the cart page. Alternatively call us on 1300 766 619 to place the order on the spot.

  • ruddj on 23/08/2016 - 12:02

    How much suction does the pool pump need to drive the cleaner?
    I have a pebblecrete lined concrete pool, but often I don't seem to get much suction when manually vacuuming, and I'm worried it will not be enough for an auto-cleaner.

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 15:06

      If there is not much suction as you describe, there might be an issue in the filtration system, in which case suction cleaners like this one won't work properly.

      Common issues that affect suction that come to mind are:

      • Cartridge filter needs replacing (if you have one)
      • Pump not fully priming
      • Air in the line
      • ruddj on 23/08/2016 - 15:26

        Thanks. It is likely air in the line then. We had to have a one way valve installed as it got so much air it used to do a big back spray when it turned off.
        I'll keep an eye out for when there are specials on the powered cleaners that don't rely on pump. (I'm already on your mailing list)

  • StopGap on 23/08/2016 - 12:36

    I'll try again - So this pool cleaner is not suitable for tiled pools?

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 14:59

      it is suitable and it will probably work, but like any other suction cleaners there is a risk that it can get stuck in tight corners.

  • captain.wing on 23/08/2016 - 12:50

    I have a similar designed Onga Hammerhead Pool Cleaner (with a float on the front) in a pebblecrete pool

    However it's having trouble maintaining the correct balance - after a period of use it gets too tail heavy and "drags" along the floor.
    I have to backwash to reach the optimum flow before it can re-balance itself.

    Whereas the previous cleaners i've had had the float on the back. Never a problem with balance.

    What are you thoughts on this design ? Will it also suffer the same problem as the Onga?

    • Store Reppoolspa @ Pool and Spa Warehouse on 23/08/2016 - 15:46

      sounds more like a hose weight issue, have you tried adjusting them or even taking them off?

      have you tried adjusting the flow valve? - not likely, but worth checking.

  • [Deactivated] on 27/08/2016 - 10:48

    Hi OP - noticed a small tube loose inside the neck, and a coin slot flow limiter. Are these supposed to be there?

Login or Join to leave a comment
Login Join