This was posted 6 years 10 months 29 days ago, and might be an out-dated deal.

Related
  • expired

BOC EOFY Welder Run-out. Synergic MIG 175A $861, 130A MMA $208 + more, Roller Bag by Redemption

110
BOC EOFY Welder Run-out. Synergic MIG 175A $861, 130A MMA $208 + more, Roller Bag by Redemption
View Image
dsgfh on 05/06/2017 - 11:29 files.ozbargain.com.au (220 clicks)

In short, BOC are running out current model welders to suit a range of buyers. I'd had a little experience with MIG last year & have been looking to by a synergic model, ideally a multi-process unit so I could also learn TIG & stick.

Synergic machines seem to usually sell in the $1000-$1200 range for the bottom end units, so while it's only got a 20% duty cycle at 175A, this machine looked to be a real bargain for my needs.
https://www.boc.com.au/shop/en/au/boc-smootharc-multiprocess…

Note the website pricing is all ex-GST, the catalogue pictured is GST inclusive.

Other welders here https://www.boc.com.au/shop/SearchDisplay?searchTermScope=&c…

Safety equipment is also on sale, so pick up a new welding jacket, gloves & helmet while you're there.
https://www.boc.com.au/shop/SearchDisplay?categoryId=&storeI…

Other Mixed Martial Arts TIG Welder Welding

Related Stores

boc.com.au
boc.com.au

closed Comments

  • KLF23 on 05/06/2017 - 11:51

    Does anyone know if this ones okay for car body panels?

    • dsgfh on 05/06/2017 - 12:12
      +1

      I've not welded anything that thin before, but based on the figures on page 35 of the user manual, the answer looks like a maybe at best.
      https://www.boc.com.au/wcsstore/AU_BOC_Industrial_Store/pdf/…

      Material thickness (mm) 1–1.6
      Wire diameter (mm) 0.8–0.9
      Current (amps) 45–80
      Voltage (volts) 14–16

      Material thickness (mm) 2
      Wire diameter (mm) 0.8–0.9
      Current (amps) 60–100
      Voltage (volts) 16–17

      The 175 I bought has a minimum 50A for MIG & a rated working voltage 16.5 to 22.8 V, so borderline.

      Hopefully someone who actually knows what they're talking about can help :)

  • AMLagonda on 05/06/2017 - 13:54

    I am after a multi use welder like this for home hobby and Ive been trying to find as much info as I can on the 175 welder.

    The one concern I have a there is no separate control for wire speed just a percentage voltage control within the setting, is that good enough?
    as I have been staring at this welder https://gentronics.com.au/collections/mig-welders/products/l… for a long while….

    • dsgfh on 05/06/2017 - 15:31

      Theory is that the synergic welders manage this for you. Certainly the downside of this model is that there's no manual settings if you don't like the synergic program & range of available adjustment. By most accounts they'll produce a better weld from us amateurs.

  • ruprectaus on 05/06/2017 - 20:33

    Does this just run off a 10 Amp GPO ? I thought it said in the tech sheet it was a 28Amp input but it does say single phase ? so I am confused. How many Watts is it using ? I am off grid … I have a 5000/7000/9000W inverter (5 continuous, 7 for 20 mins and 9 for startup)

    I have no idea, I am looking at getting one and then having a boilermaker mate spend some time teaching me to do quick and dirty welding .

    • dsgfh on 05/06/2017 - 20:37

      The small stick welder does. The MIG I bought has a 15A plug. I'm running it through a Ampfibian (https://www.bunnings.com.au/ampfibian-mini-15a-to-10a-power-…), but only got it this weekend so haven't tried anything like a long run at full power to see how long it lasts before cutting out. Fully expecting to get a 15A point put into the garage at some point, but will just run it at lower power or shorter runs until then.

  • AssociatedPecan @ boc.com.au on 06/06/2017 - 09:36
    +1

    PDF catalogue here might be easier to read.

    • dsgfh on 07/06/2017 - 08:11

      Thanks for that. I could not find the catalogue on the site for some reason.

Login or Join to leave a comment
Login Join