This was posted 12 years 9 months 24 days ago, and might be an out-dated deal.

Related
  • expired

ATA GDO6 garage roller door opener, $410 installed by Agg Doors - save $70 (MELB ONLY)

30
ATA GDO6 garage roller door opener, $410 installed by Agg Doors - save $70 (MELB ONLY)
Go to Deal
Store Repaggdoors on 21/07/2011 - 13:43 aggdoors.com.au (334 clicks)
Last edited 21/07/2011 - 14:12

Hello fellow Ozbargainers after the great Feedback last post we have decided to re-post this offer.

Simply mention Ozbargain when calling to receive $70 off the supply and installation price of an ATA GDO6 garage roller door opener.

The ATA GDO-6v3 EasyRoller 600N SLIM DRIVE ROLL UP GARAGE DOOR OPENER is an Automatic Technology Australia product, it is suitable for roller type garage doors, it has a slim fit design requiring as little as 40mm between the curtain of the garage roller door and the inside of the door bracket not to mention it's very stylish looks as far as roller door openers go, it comes with two trio type remote controls which work on the latest technology, utilising Multi-Frequency Coding Technology which overcomes the all too common interference problems.

for more details about the special offer on the ATA GDO-6v3 Garage roller door opener please follow the link.

or email us at:

[email protected]

Other Automatic Garage Door Door Garage Garage Door Controller Garage Door Installation Garage Installation Garage Remote Garage Repairs Openers Remote Remote Control

Related Stores

Agg Doors
Agg Doors

closed Comments

  • jv on 21/07/2011 - 13:45

    Put PRICE in title…

  • 777 on 21/07/2011 - 13:46
    +1

    what the price of install ?

    • jv on 21/07/2011 - 13:47

      …the price of the product would be good to know too…

    • Store Repaggdoors @ Agg Doors on 21/07/2011 - 13:49

      The price of Product is $410 after discount…the supply only price is $35 off too which brings it to $295 which is cheaper than ebay price!

    • Store Repaggdoors @ Agg Doors on 21/07/2011 - 13:49

      The price of Product is $410 after discount…the supply only price is $35 off too which brings it to $295 which is cheaper than ebay price!

  • ca6leguy on 21/07/2011 - 13:48

    You should put the price in the title. At first glance, it looks like $70 for the deal!

    • jv on 21/07/2011 - 13:48

      If it's $70, I want one…

      • Store Repaggdoors @ Agg Doors on 21/07/2011 - 13:51

        I'll see what I can do :) thanks for the comments… is the last reply enough detail? any other suggestions on how to better write the title as it is limited for space.

        • jv on 21/07/2011 - 13:53

          put the price in the title of the thread, then people will discuss the deal and not the lack of information…

        • ESEMCE on 21/07/2011 - 14:04
          +3

          ATA GDO6 garage roller door opener, $410 installed by Agg Doors - save $70(MELB ONLY)

      • Store Repaggdoors @ Agg Doors on 21/07/2011 - 13:59
        +1

        How's the new title jv?

        • jv on 21/07/2011 - 14:10

          better

        • Store Repaggdoors @ Agg Doors on 21/07/2011 - 14:13

          I've changed it to scubacoles suggestion is this better?

    • Store Repaggdoors @ Agg Doors on 21/07/2011 - 14:15

      Thanks for the comment I have reworded things as per everyone's suggestions

  • mick123 on 21/07/2011 - 14:29

    this is for a single door right? (single unit)
    are these fairly easy to install?
    is postage included in the supply only price (to Sydney)?
    Bunnings has a Chamberlain one for $275 I think.

    Do you have any products suited to a single drive through garage (roll a door on both ends)
    Thanks

    • Store Repaggdoors @ Agg Doors on 21/07/2011 - 14:52
      +1

      It can handle double garage doors the weight specs are as follows:
      Max. door width/height/weight 5500mm/3000mm/100kg

      With regards to whether it is easy to install, if you are mechanically minded yes very easy to install.

      and yes bunnings has a variety of motors I think the one your talking about is one of their entry level products as their price ranges from $275 to $495 just viewing the site as I type. unfortunately they don't sell the GDO6 on their site but you can compare the price on ebay.

      and with regards to postage to sydney if you could please call the office tomorrow as the person who handles shipping has left early today or if you send us your details to [email protected] I will gladly find out and email you a reply.

      This product is suitable for your requirements for our other roller door openers please visit out online shopping section….any recommendations on helping us build a bigger and better website are welcomed.

  • lang_tu_syd on 21/07/2011 - 16:11

    Hi Rep, i'm in Sydney and also interested in this. Can you do $295 deliveried to Sydney?
    Also, would you recommend anyone in Sydney do a good intallation job for this and price. Thanks

    • Store Repaggdoors @ Agg Doors on 22/07/2011 - 10:47

      Shipping is $25 to Sydney, unfortunately we don't have any contacts at the moment for installers in Sydney .

      • Store Repaggdoors @ Agg Doors on 22/07/2011 - 10:48

        this may vary by $5 to $10 depending on your suburb I've been told

Login or Join to leave a comment
Login Join