This was posted 12 years 5 days ago, and might be an out-dated deal.

Related
  • expired

QEEP - Aero Blade Windscreen Wipers - Universal (Pair) - $30 Delivered

280
QEEP - Aero Blade Windscreen Wipers - Universal (Pair) - $30 Delivered
Go to Deal
Associatedonlyletters on 24/04/2012 - 20:01 streettuned.com.au (2052 clicks)
Last edited 28/10/2017 - 22:48 by 1 other user

This offer has ended. If you have any issues or questions, please email them to [email protected], I will no longer monitor this page.

QEEP Windscreen Wipers replaces your traditional windscreen wiper assembly with the Aerodynamic flat profile design which has more than 1000 points of pressure to provide a clean wipe, every time.

We usually sell these for $29 + $7.50 so they're half price.

EDIT 1; If your vehicle has one of the following wiper adapters, our wipers will fit your vehicle;

  • J Hook
  • Pinch Tab
  • Push Button
  • Slide Lock

EDIT 2;
Wrong Sized Wipers?
If I've accidentally sent you the wrong sized wipers, please let me know and I'll re-send your order at no charge. Please send all the details to be email below.

Rear Wipers Don't Fit?
If you've purchased rear wipers from me and they don't fit, please let me know and I will provide you with a refund so you are not out of pocket for something that did not work. Please send all the details to my email below along with a picture of your wiper arm.

Incomplete Order?
If your order arrive incomplete, please let me know and I will fix it fast!

Confused About Sizing?
Measure your existing windscreen wipers from one end to the other. Take note of both measurements. Goto www.Google.com, search for 'convert XXXmm (or XXXcm) to inches' and round off to the nearest inch but its best to drop down a size to stay on the save side, so if Google tells you that it converted to 17.5 inches, round off to 17 inches.

Please note that 17 inches is the smallest wiper that we offer so anything smaller then that, we won't be able to help until the next offering.

Email: [email protected]

Automotive Qeep Windshield Wipers

Related Stores

Street Tuned
Street Tuned

closed Comments

        • Associatedonlyletters @ Street Tuned on 29/04/2012 - 20:42

          Ok thanks.

  • The Hobo on 26/04/2012 - 12:54

    Done - Ordered :)

  • prubie on 26/04/2012 - 13:17

    I have a Subaru Outback 06 model. Need front wipers only, measured driver as 24" (600mm) and passenger as 18" (450mm). I can't work out if the clip type will suit my vehicle though. Op, do you know and can you confirm?

    • Associatedonlyletters @ Street Tuned on 26/04/2012 - 13:39

      Your vehicle has a J hook from memory. Our wipers will fit. If they dont; I'll give you a full refund, no questions asked.

  • alvian on 26/04/2012 - 13:55

    Measurements on a Ford Taurus: Driver side 24", passenger side 19.5".

    The sizes do not come in 0.5" increments, so do I go up to 20" or down to 19" for the passenger side?

    • Associatedonlyletters @ Street Tuned on 26/04/2012 - 14:09

      Drop down to 19" to be on the safe side.

  • Associatedonlyletters @ Street Tuned on 26/04/2012 - 17:34
    +1

    All orders that were placed yesterday and today before 4pm have all been sent out and are now at the Australia Post distribution center for sorting.

    Your order will either arrive on Monday/Tuesday.

  • keepingtrack on 26/04/2012 - 20:55

    After a pair for a Holden Astra 2007 CD AH 5 Door, please recommend sizing? Thanks.

    • Associatedonlyletters @ Street Tuned on 26/04/2012 - 22:49

      22" (560mm) and 18" (450mm) but please measure your wipers to confirm.

      Thanks for your inquiry.

  • ferguscan on 27/04/2012 - 09:42

    Hello,

    I would like to buy, but I have a BMW 5 series with a driver's wiper of 25". But you don't sell that size. What do you recommend?

    Thanks.

    • Associatedonlyletters @ Street Tuned on 27/04/2012 - 14:17

      You can drop down to 24" if you don't mind. Please take note of the wiper adapter pictures on the product page for fitment. If you think the wipers wont fit, please send a picture of your wiper arm to [email protected] and we will advise if they will fit or not.

  • SBOB on 27/04/2012 - 09:51

    my set arrived today… so no issues with delivery times…

    Will see if they fit properly later

  • Abaddon on 27/04/2012 - 10:33

    I'm looking to get a set for two cars:

    A 96 Astina (BA)
    - 50cm drivers
    - 45cm passenger
    - 50cm rear

    A 96 Holden Barina (SB)
    - 50cm drivers
    - 44cm passenger
    - 34cm rear

    Can't find anything small enough for the Barina on the website, am I just out of luck?

    • Associatedonlyletters @ Street Tuned on 27/04/2012 - 14:16

      Hi,

      You will need the following:

      Astina
      - 20" Drivers
      - 18" Passenger
      - 20" Rear

      Barina
      - 20" Drivers
      - 17" Passenger
      - I don't have any in that size.

  • glee on 27/04/2012 - 11:20

    Are these still on sale? There seems to be +$5 on every size.
    Also, can you tell me if the clip types will fit on a 2001 Subaru Forester, a 2006 Toyota Camry (Altise), a 1995 Holden Apollo, and a 2005 Toyota Echo?

    • Associatedonlyletters @ Street Tuned on 27/04/2012 - 14:18

      Yes, will fit all vehicles you advertised but you need to check measurements as the smallest size we have is 17"

      The additional $5 is only for the rear wiper as the advertised price is only for the front wiper set (pair).

  • Mungulz on 27/04/2012 - 22:01

    Size for an AU Falcon Series 2?

    I'm thinking it will be the same as the BA, 24 and 18?

    • Associatedonlyletters @ Street Tuned on 28/04/2012 - 00:32

      According to the Trico website, your vehicle requires 2 x 22" wipers. Please measure your existing wipers to confirm.

  • bluebluebird on 27/04/2012 - 22:11

    Will this fit
    1. Suzuki Swift 2006 (front and rear)
    2. Mazda CX7 2011 (front and rear)

    Thanks

  • Associatedonlyletters @ Street Tuned on 28/04/2012 - 00:31

    1. 20" and 18" << please double check by measuring the wipers on your car.

    2. 25" and 16" << I don't have those sizes but I can offer 24" and 17" please measure your wipers as the initial sizes I quoted might be wrong.

    I'm not sure about the rears, please measure them, if you end up buying rear wipers from me and they dont fit, I'll give your money back that you paid for the rear wipers, so you can give it a shot and if it fails, you have nothing to lose.

    Thanks

  • Keeno on 28/04/2012 - 08:46

    Hi Hilali, are you able to confirm if these will fit a Volvo S40 2009? Cheers

    • Associatedonlyletters @ Street Tuned on 28/04/2012 - 09:58

      I'm unsure about the Volvo but it should. Can you please email me a picture of one of the front wiper arms on your vehicle so I can confirm?

      • Keeno on 28/04/2012 - 18:24

        I've sent some photos, thanks again

        • Associatedonlyletters @ Street Tuned on 29/04/2012 - 01:22

          Hi, Got your email.

          Yes, the wipers will fit your vehicle.

        • Keeno on 29/04/2012 - 10:07

          Ordered and a set for my GF, thanks, +1 from me

  • Perete on 28/04/2012 - 18:44

    I got the wipers yesterday, that was quick. Thanks for that Hilal. I just installed them on my 2002 Camry and the driver's side doesn't sit flush on the windscreen and misses a portion when wiping, but the pair I got is a tad bit longer than the stock ones. Could that be the reason?

    • Associatedonlyletters @ Street Tuned on 29/04/2012 - 01:24

      Yeah, it'll do that because its a little larger that's why I tell my customers to measure even tho I advise sizes.

      I can fix the problem at no charge if your OK to pay for the postage.

      If it was an error caused on my behalf. I'll cover the postage. Whats your order number?

      • Perete on 29/04/2012 - 09:18

        No it was my fault. Order # 120424-214230-3910. Happy to pay for postage. I just measured the old drivers side wiper and it's 21". The passenger side is ok. How do I go about with payment?
        Thanks Hilal.

  • kudoz on 29/04/2012 - 10:57

    Any chance you know the specs for a 1993 Toyota Celica SX Liftback? Desperately in need of a new set of blades for front and back! Cheers!

    • Associatedonlyletters @ Street Tuned on 29/04/2012 - 20:48

      Drivers: 20"
      Passenger: 18"
      Rear: 17"

      If the rear wiper doesn't fit. I'll give your money back for the rear wiper.

  • ksirc on 29/04/2012 - 13:49

    Ordered. Hopefully it sits well on my Lancer

  • alvian on 29/04/2012 - 22:27
    +1

    +1 for the deal. Would have +10 (if allowed) for the Hilal's excellent service and prompt communication.

    Hilal: Your profile said you are a rep for no1supplements.com.au. Have you switched companies?

    • Associatedonlyletters @ Street Tuned on 30/04/2012 - 10:24

      Thanks Alvian.

      I own both companies.

  • vorsprung on 30/04/2012 - 10:53
    +1

    Well I got mine, nowhere did it mention the wiper blades were going to be fluro green. Do you happen to sell the black blades that are pictured in your advertisement? 21".

    • vorsprung on 30/04/2012 - 15:05

      Turns out the fluro green piece was fluro for a reason… it's just a cover. Boy do I feel stupid.

      • Associatedonlyletters @ Street Tuned on 30/04/2012 - 16:44

        [joke]

        Let me know if you need help with installing the wiper.

        [/joke]

    • kusama on 30/04/2012 - 15:09

      That's just a cover over the black wiper. I haven't opened my pack yet but I can see some of the fluro is off on mine and the blade is black.

  • Associatedonlyletters @ Street Tuned on 01/05/2012 - 09:45

    ** PLEASE NOTE **
    ** PLEASE NOTE **
    ** PLEASE NOTE **

    This offer has ended. If you have any issues or questions, please email them to [email protected], I will no longer monitor this page.

    ** PLEASE NOTE **
    ** PLEASE NOTE **
    ** PLEASE NOTE **

    • eug on 01/05/2012 - 11:29
      +1

      Crap, I was just going to buy some today!

  • stumo on 08/06/2012 - 15:17

    One of mine has just started making a horrible plasticy creaking noise. Anyone else had this? I'm using the hook type fitting (default type).

Login or Join to leave a comment
Login Join