This was posted 1 year 8 months 13 days ago, and might be an out-dated deal.

Related
  • expired

KNIPEX TwinGrip Slip Joint Pliers with Comfort Grip (82 02 200) $48.90 + $16.50 Delivery ($0 with $50 Spend) @ element14

1050
KNIPEX TwinGrip Slip Joint Pliers with Comfort Grip (82 02 200) $48.90 + $16.50 Delivery ($0 with $50 Spend) @ element14Affiliate
Go to Deal
Cashback
d123 on 13/08/2022 - 18:32 au.element14.com (6581 clicks)
Last edited 16/08/2022 - 21:01 by 2 other users
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

This it the cheapest ever for this AMAZING Knipex tool.

Just add a few AA batteries (or something else) to the order to get to $50.00 ($55 with GST) for free delivery.

It's a fantastic tool and something I wish I had had years ago! Here is a good review.
https://www.youtube.com/watch?v=K5TvKSJBE40

Note also that the cheaper version of this tool, with the standard grip, is also available at Element14 for $39.37 + Delivery but as there were only 2 left at this price it will likely be sold soon.
https://au.element14.com/knipex/82-01-200/plier-twingrip-sli…
Personally I prefer the Comfort Grip any day.

Element14, which is the old Farnell Australia as far as I understand, were very good with their shipping. They used TOLL Overnight Shipping from their NSW warehouse, and only took a few days to process the order.

Good luck, and enjoy!

Enjoy!

This is part of Father's Day deals for 2022.
Home & Garden Father's Day Knipex Pliers

Related Stores

element14
element14

closed Comments

  • GeneralSkunk on 13/08/2022 - 19:25
    +9

    Ah man. I just got my Knipex side cutters and long nose pliers in the mail this week. (Which adds to my collection of about 3 other Knipex tools). Awesome stuff. I need to try not to buy these, they look super handy.

    Thanks op.

    We buy from E14 virtually daily at work (I’m an electronics eng), they are a very good and very professional supplier. Recommended.

    • lancesta on 16/08/2022 - 12:25

      Got any recommendations for flush cutting side cutters? The ones with a flat face so I can cut really close to the material. Looking for some to use with cable ties and cleaning up plastic components. Ideally heavyish duty (not the ones that come with 3D printers).

      • GeneralSkunk on 16/08/2022 - 13:47
        +1

        I was initially thinking these which I have a pair of:

        https://www.amazon.com.au/dp/B005EXOE5U

        Sharp as hell and very accurate. You could shave with these but it’d take a while. But then I read you said heavyish duty. These would cut most things, cable ties easily. You could go for something like this, has a longer 160mm handle:

        https://www.amazon.com.au/72-01-160-Diagonal-plastics/dp/B00…

        It might have a wider opening, the first one I linked to doesn’t open that wide if you’re cutting big things.

        Otherwise there’s heavy duty side cutters but they aren’t flush. I have one I use for sitting fence wire etc.

        Sorry for a lil the Amazon links, just where I’d gotten mine (but I don’t like Amazon much).

        • lancesta on 17/08/2022 - 09:33
          +1

          Thanks! Both of those are exactly what I was looking for. I wasn't too clear on it, it is mainly cable ties with only the occasional trimming back of wires to be flush with a connection. Just will likely get a lot of use, get wet sometimes with fairly hard water, dropped occasionally from height onto concrete/metal e.c.t.

          The second one probably suits my use slightly better just due to that opening. But if I did more electronics I'd 100% pick-up that first one too. All good re Amazon links, they've got a big catalogue so makes it easy to find things. I'll search around other places to try and find an alternative site if there is one. Thanks again

          • butter on 17/08/2022 - 20:08
            +1

            @lancesta: I have the vde rated ones like the first link. Can thoroughly recommend.

  • OMG on 13/08/2022 - 19:27
    +13

    I think I do need to get a professional job before I can utilise this tool.

    • boomramada on 14/08/2022 - 10:13
      +2

      Just buy it, so you can feel professional;)

    • mauricem on 15/08/2022 - 13:27
      +2

      wrong sequence, you need this tool to get the job;) rock up to interview with a toolbelt full of knipex and you'll be offered any job you want.

    • vchar on 16/08/2022 - 12:29

      i need such a high quality tool to compensate the lack of my skills. at least I could be quite confident to confirm whether I correctly follow what I learn from youtube rather than just blame the low quality tools. :D

  • Black Hole on 13/08/2022 - 19:28
    +1

    Thanks, it looks handy to have. Bought 2.

  • ColPow11 on 13/08/2022 - 19:34
    +1

    Cheers - I've always wanted a pair for work.

  • ausbuysell12 on 13/08/2022 - 20:01
    +1

    Price listed in OP is excluding GST

    • d123 on 13/08/2022 - 20:04

      Thanks. I have updated the title with the GST inclusive price.

      • ausbuysell12 on 13/08/2022 - 20:06

        Thanks, is this because of the SG stock now or was it adding GST on top of the listed price earlier as well? Just wanted to confirm if I missed buying it cheaper :)

  • d123 on 13/08/2022 - 20:02

    Same pliers at Total Tools is $92.50. Just saying.
    https://www.totaltools.com.au/187686-knipex-200mm-twingrip-s…

    • NevC on 13/08/2022 - 20:24

      Sent them a price match query.

      • kampret on 13/08/2022 - 20:30

        Does TT have price match policy?

      • d123 on 14/08/2022 - 00:11
        +1

        Total Tools had told me that they couldn't even match $65.00 for the cheaper version of this tool.

        • NevC on 14/08/2022 - 17:18

          Total Tools refused to price match for this reason -

          Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon, Gumtree etc)

    • gakko on 14/08/2022 - 13:49

      I was juts in Sydney Tools and its like, nice stuff at 20% mark up from internet prices. I get that in store has extra cost but Im just not paying that.

  • kampret on 13/08/2022 - 20:21
    +2

    Their website is really awful, not easy to navigate, and does not give you alternative payment other than CC.

    • samyall on 14/08/2022 - 07:48
      +1

      It is primarily business focussed but worth suffering through for amazing service.

      I ordered a new power supply for a screen when WFH in 2020 and it arrived the same day. Just last week they sent a courier with a package with 2 switches with value $1.80 as they are committed to getting you your goods ASAP.

  • 7hours 44min ago on 13/08/2022 - 21:01
    +7

    https://au.element14.com/duratool/d03437/philips-screwdriver…
    Added this to get to get to just over $50. Can never have too many good cheap PH2s around the house!

  • Imjustsayin on 13/08/2022 - 21:13
    +1

    Thanks grabbed one too!

  • Troppa on 13/08/2022 - 23:03
    +1

    Amazing price. Can't go wrong with the brand. I'm impartial to the grips, but do feel like I can get a bit more force out of the comforts. Looks like they'll be handy for screw extraction among other things. Typically use a pair of Engineer PZ-59 for this but glad to have another Knipex tool to add to the rest. Thanks!

  • butter on 13/08/2022 - 23:40
    +1

    Solid, bought.

  • Jiyujin on 14/08/2022 - 08:27
    +1

    Thanks OP, bought one.

  • Ntsh on 14/08/2022 - 08:39
    +2

    Hmmm, after I bought last night (thanks OP!) it said there were 3 in stock… since then 3 people have said here they bought and still says 3 in stock…

    Anybody with experience with these guys know much about when stock levels updated? Hope my order has stock allocated!

    • jjoker on 14/08/2022 - 08:52
      +1

      Sounds like a blackwoods

      • Ntsh on 14/08/2022 - 08:58

        Can you unpack?

    • slipperypete on 07/09/2022 - 18:36

      Hey

      what time did you place your order? Been told January now despite placing order at 8:30pm on the 13th

      cheers

  • crc32 on 14/08/2022 - 09:06
    +2

    Thanks OP. Didn't know I needed these.

  • Herbse on 14/08/2022 - 09:20
    +1

    Thanks. Looks handy for stripped bolts.
    Got with knippex nippers which I've been needing for a while

  • johnwinds on 14/08/2022 - 12:26
    +1

    Thank you for introducing me to this one. I bought it with the AA batteries but in hindsight I should have bought two instead.

    The website was stuck on "Registering", then I tried to register with another password, this time without any special characters.

    Next, I need to add some of their Raptors to my collection.

    • zonra on 14/08/2022 - 12:52
      +1

      Next, I need to add some of their Raptors to my collection.

      If you haven’t already, check out their Cobras and plier wrenches, they may be more versatile and useful than Raptors imo.

      • johnwinds on 14/08/2022 - 16:46
        +1

        Yes, I'm well on my way in completing my Cobra and wrench Knipex collection. The Raptors would be there for "special" situations.

        I'm more of a collector than a heavy user of these tools. It may not make economic sense but it is a dopamine fix!

        • zonra on 14/08/2022 - 17:11
          +2

          I'm more of a collector than a heavy user of these tools. It may not make economic sense but it is a dopamine fix!

          Preaching to the choir there brother!

          • johnwinds on 14/08/2022 - 17:13
            +2

            @zonra: The way I justify it to myself: "I don't gamble, smoke, drink or do drugs. So, I need to at least have one vice!".

            • zonra on 14/08/2022 - 18:15
              +1

              @johnwinds: Those exact words are what I keep telling my wife, along with “You don’t need these tools until you do” and “You pay for quality so that they last forever”.

              • johnwinds on 14/08/2022 - 18:19
                +1

                @zonra:

                “You don’t need these tools until you do”

                I don't even pretend I will ever use some of these anymore. They are now just fidget toys to keep on my desk and to marvel at the engineering and quality.

  • Squeezy on 14/08/2022 - 13:26
    +1

    Thanks, grabbed one along with some aligator clips for free shipping.
    Love the other Knipex tools I have already. Good quality stuff

  • R4 on 14/08/2022 - 13:34
    +2

    I have more Knipex tools than you could shake a strike at, yet I bought this too.

    I'm addicted to Knipexcaine.

  • Assclown on 14/08/2022 - 15:17
    +3

    Thanks OP. Bought one due to Fomo 🤣

  • Bunsen on 14/08/2022 - 18:27
    +1

    nabbed also, hopefully we get our Knipex fix!

  • Ntsh on 14/08/2022 - 18:34

    Unfortunately I think a lot of us will be on backorder… still says 3 available… like it has for the last 21 hours…

  • z28 on 14/08/2022 - 21:27

    Beware, their invoice is in USD dollar, I might return for refund unless they reimburse the foreign exchange fee. I wasn't aware until receiving the invoice, otherwise I would have used different CC.

    • kampret on 14/08/2022 - 21:35

      When did you place your order? I ordered yesterday haven't received any invoice yet.

      • z28 on 14/08/2022 - 22:12

        It's in the email immediately after I ordered.

        • kampret on 14/08/2022 - 22:38

          Your Element14 order ******** has been received. That was the email I received after placing my order but there's no invoice in it. They haven't even charged my CC.

    • Squeezy on 15/08/2022 - 14:49

      It shouldnt be as the website mentions GST and the $50AUD limit for free shipping

  • rwps on 14/08/2022 - 21:43
    +1

    I wish I had these 30 years ago when first setting up my tool box.
    Fathers day sorted - thanks OP

  • Westpac on 15/08/2022 - 12:04

    there are still 3 remaining. Is it worth taking the risk?

    • kampret on 15/08/2022 - 12:08

      Has anyone received a shipping information yet?

      • Ntsh on 15/08/2022 - 12:22

        I called this morning and they said it was coming from UK (not SG!) and would be shipped from here early next week. I ordered @ 9pm sat night

        • kampret on 15/08/2022 - 12:47

          Ordered Sat night 9.20pm, no invoice and no CC being charged. Have they charged your CC yet?

          • Ntsh on 15/08/2022 - 12:51

            @kampret: nope. And no invoice either.

  • Herbse on 16/08/2022 - 08:17
    +1

    I just got charged for the second item I purchased..

    • AusRetro on 16/08/2022 - 08:24
      +1

      They charge each item just before they ship it. I received the charge for my secondary item about an hour after I ordered and the pliers 3 days later.

  • skillet on 16/08/2022 - 11:45

    These jaws will mangle anything it bites, so I prefer spanners and sockets. It can be very useful when everything is rounded off and destruction time.

    • lancesta on 16/08/2022 - 12:28

      Yeah definitely wouldn't use them on a bolt I actually cared about. I've made the mistake of using multigrips before and it's a bad habit to fall into.

  • Squeezy on 16/08/2022 - 17:50

    Got invoiced for the aligator clips today.

  • Squeezy on 17/08/2022 - 18:00

    Got an acknowledgement of order for all items just then with expected delivery of the pliers of 29/9/2022

    Pricing is in AUD for a grand total of $55 - not sure why there was a previous post of someone being invoiced in USD ??

    • Ntsh on 17/08/2022 - 18:19

      Beat you by a day… my pliers due 28/9/2022. hehehe

      and same — in AUD.

      • kampret on 17/08/2022 - 18:31

        28/09 also here

    • Imjustsayin on 17/08/2022 - 18:49

      Well 30/9 but sort of glad I am not the only one a month+ away.

    • Ethan7cadman on 17/08/2022 - 21:28

      +1 for the 29/9

  • blamesociety on 17/08/2022 - 19:55

    I received an email saying my order was on hold for "trade compliance" until I provided them with my full name for the delivery address. I asked what they meant (since my order has my first name and surname on it already), and they asked me if I had a middle name. Wtf?

  • NevC on 18/08/2022 - 16:51

    I ordered on the 15th and it's still in the processing stage. Not been charged yet.

    • WaKkO1 on 28/08/2022 - 13:25

      Same for me

  • travisty18 on 01/09/2022 - 18:16

    Mine arrived today! Anyone else got their order yet?

    • d123 on 03/09/2022 - 01:51

      Are you happy with it?!

      • travisty18 on 03/09/2022 - 11:33
        +1

        Yeah they seem good to me. Quality is good as expected and they are a good size. I didn’t realise how much adjustment they had to be honest which is awesome. They’ll definitely be handy to have in the toolbox

  • slipperypete on 07/09/2022 - 17:14
    +1

    Placed my order on the 13th August……So I have been told end of January before they get more stock

    What kind of a company has 4 months waiting without even a mention that it is delayed

    They are still taking orders and advertising it as available September!!

    • kampret on 07/09/2022 - 18:22
      +1

      Ordered on the same date like yours and was told estimated delivery on 28/9.

      • slipperypete on 07/09/2022 - 18:35
        +1

        Hey kampret Thanks for the reply

        Just saw you placed your order at 9:20pm

        Mine was at 8:30pm

        They basically told me I was lying about others ordering after me

        You may want to check if they are gonna get them out to you.

        Really frustrating as I have needed these multiple times in last couple of weeks!!

        • johnwinds on 08/09/2022 - 19:04

          I followed up with them today and was told end of Jan 2023 too. It is kind of annoying how they've kept quiet about it until I asked.

          • slipperypete on 08/09/2022 - 19:27
            +1

            @johnwinds: really disappointing communication

            I work in maintenance up the the ski fields. This is a highly useful tool in the conditions due to temperature extremes.

            To not be told it is out of stock is just crazy.

            To keep saying it will be in stock next month and still taking orders is just plain wrong

            When did you order yours?

            • johnwinds on 08/09/2022 - 20:10

              @slipperypete:

              When did you order yours?

              Aug 13, 11:20pm

              • slipperypete on 08/09/2022 - 20:43
                +1

                @johnwinds: 8:30pm on the 13th.

                I know someone who placed the order on the 14th and already got theirs!

                • johnwinds on 08/09/2022 - 21:35
                  +1

                  @slipperypete: Same thing happened to me with the Leatherman OHT order from Catch.

    • Ntsh on 08/09/2022 - 15:11

      how/where did they tell you Jan? Had you had a previous date promised before?

      • slipperypete on 08/09/2022 - 19:24

        No date. They obviously messed things up. They haven't even once said it'll be delayed. People who ordered after have received theirs.

        I'm blown away. I emailed them and they just said

        The below is highly unlikely. If that is the case, then we have a serious issue at hand. Please share the Order reference number of your friend and we will definitely look into our stock allocation procedures again

        They STILL have it advertised as back in stock next month despite saying

        End of January 2023 is the best ETA from the supplier as of now. Please advise if you would like to keep the order as it is or cancel it.

        I have told them it is showing next month on their website and they are still tasking orders.

        • Ntsh on 09/09/2022 - 15:23

          yikes!

          I called and was just told January too… and the guy I spoke to could not give a shit…

          • slipperypete on 09/09/2022 - 17:37

            @Ntsh: it's a real bad attitude.

            It doesn't seem much better that the mods here are happy to keep the deal open. I told them it has no stock, they STILL have it advertised as available next month and people here are still placing orders for a part that has a best delivery date of January

            deception and dishonesty

  • Herbse on 12/09/2022 - 15:54
    +1

    I'll be pleasantly surprised if I ever get these. Not holding my breath tho.

  • Imjustsayin on 12/09/2022 - 18:18

    "Kindly note that the parts are available on our supplier’s lead time and as per the ETA would be by Mar 2023". Order placed Aug 13th. Hopefully it can be cancelled.

    • truetypezk on 12/09/2022 - 19:23

      Actually what is the hurry. For most of us it probably wont get used for a few times by Mar 2023. It is still one of the lowest possible prices to buy this tool.

      • slipperypete on 12/09/2022 - 20:21

        For most of us it probably wont get used for a few times by Mar 2023

        I would have used used this multiple times. I work in the snow fields where half the bolts have rusted down due to extreme conditions

      • Imjustsayin on 14/09/2022 - 07:38

        Agreed if you can wait. I thankfully was able to cancel.

        • slipperypete on 14/09/2022 - 15:12

          anyone can cancel, you don't get charged till they post it

    • slipperypete on 12/09/2022 - 20:19

      why the flying fu@k are they still advertising October delivery and why have the mods here ignored this

  • supersaintly on 20/09/2022 - 13:42

    I hate you all lol… why did I have to read this post and spend money!??!

    • slipperypete on 20/09/2022 - 21:34

      did u notice that despite their web page saying delivery next month they're saying no delivery till March next year

  • andrew229 on 21/09/2022 - 22:27
    +2

    Hopefully we eventually get the orders……

  • NevC on 27/09/2022 - 19:14

    No sign of mine being sent yet.

    • kampret on 29/09/2022 - 18:05
      +1

      Me too. The original estimation was by 28/9.

  • drillvoice on 10/10/2022 - 20:00

    Update I got today is that delivery has been delayed to March 2023!!! :(

Login or Join to leave a comment
Login Join