This was posted 9 months 19 days ago, and might be an out-dated deal.

Related
  • expired

[Pre Order] $550 - $1300 Voron 3D Printer Kits + Free Delivery ($0 SYD C&C) @ Siddament

120
[Pre Order] $550 - $1300 Voron 3D Printer Kits + Free Delivery ($0 SYD C&C) @ Siddament
Go to Deal
AssociatedSidddd on 09/07/2023 - 13:29 siddament.com.au (338 clicks)
Last edited 10/07/2023 - 12:32 by 2 other users

Hey, Ill be on holidays today till August so get your orders in today for the last dispatch of filament before Monday, Cuttoff is 9pm tonight!

Cutt off for voron kits on this run is 15th July with eta of mid to late August

We are now selling Voron Kits By Formbot on a preorder basis. We collect the funds, and order the kit in for you directly from formbot at discounted rates, The savings are 250-300$ on most kits going through us as opposed to going through formbot. These kits contain everything but the printed parts to make the printer including BTT pis so you dont have to shell out ridiculous amounts of money for a raspberry Pi.

These kits contain the following mods/ options
V0.2
Kirigami Bed
Wiring Break out board
BTT Pi
PC pannels
High Temp Moons motors
High temp linear rails
V6 70w Ceramic hotend

Voron Trident and 2.4
Stealth Burner default
Mgn 12 on gantry
Wiring looms
PC pannels
Machined Build plate
Btt Pi
Wagos

Warranty is provided directly by formbot

Please do not buy Voron kits if your aren't comfortable wiring printers and flashing printers from scratch, instead purchase a bambulabs printer or premade printers, Vorons are for advanced users and may need tinkering to get working as opposed to other printers!

These kits have a ETA of mid to late August and have free shipping Australia Wide!

Pricing (includes free shipping)
Voron V0.2
120x120mm $550

V2.4
250x250x250 $1150
300x300x300 $1250
350x350x350 $1350

Voron Trident
250x250x250 $1150
300x300x250 $1200
350x350x250 $1250

August Filament preorders coming soon

Electrical & Electronics 3D Printer 3D Printer Parts Free Shipping

Related Stores

Siddament (Previously P3D)
Siddament (Previously P3D)

closed Comments

  • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 13:32
    +1
    • for more info on the BOM of the kits please check Formbots website or mine directly. I have used various formbot kits personally and we have chosen them over other manufacturers due to their consistent quality and great aftersales support.
  • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 13:35
    +2

    Printed part kits for the vorons will be available shortly in all our abs options and for all sizes

    approximate pricing on a full printed kit including skirts and all parts will be 100$ for Voron 2.4s and Tridents no matter what size

    The pricing for a V0.2 kit will be approximately 55$

  • Yarkin on 09/07/2023 - 14:45

    Hmmm tempting me to cancel my gaming PC order with Techfast and get a Voron 2.4 350 mm kit instead.
    P.S. I think you have a typo in the largest size dimensions - should be 350 not 250?

    • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 14:54

      For the Tridents the top Z height is always 250mm

      For the 2.4 I have just checked and they do all seem correct!

      Definitely go for a gaming pc first, as if you do order this you wont see it for another month for sure as these ship from the factory on the 16th to Australia Via sea

      • Yarkin on 09/07/2023 - 15:40

        Oh I mean in this post it says 250x350x350 for the 2.4.

        That time frame doesn't sound much slower than Techfast, to be honest 😆

        • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 15:44
          +2

          Ahhhhhhhh gotya

          Will fix that,

          Lmao how true, I mean if your going to build a voron Suueerrrrrrly you build your own pc

  • Xistor on 09/07/2023 - 15:14

    Which hot end comes with the 2.4 kit? I've completely rebuilt a few printers a few times and already using klipper so the voron doesn't intimidate me but I'm still stuck between choosing voron or bambu

    • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 15:41
      +3

      they come with standard Upgraded V6 with ceramic ring heaters Vs the normal Cartridge style, I will be putting a bambu hotend into my voron so i will actually just be binning the stock hotend.

      The voron is a tinkerers machine and its rewarding when it works, and it does work well… until it either breaks or you give up

      the bambu x1c I have, I have set it up, hit print and its been stock and working fine for the past 5 months with no issues other then the warped bed which i swapped in 1 hour

      Both are great I still run both printers, but If I was wanting a printer that works Id go bambu, if I wanted a platform to mess with id go Vorons

  • DmytroP on 09/07/2023 - 15:33
    +1

    Some RPI models are available at RRP now, $93 for Raspberry Pi 4 Model B 4GB (which may be overkill for klipper): https://core-electronics.com.au/raspberry-pi-4-model-b-4gb.h…

    $40 for Raspberry Pi 3 Model A+

    https://core-electronics.com.au/raspberry-pi-3-model-a-plus.…

    • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 15:42

      These come with BTT pi spin offs made for klipper basically, as opposed to other kits with the (no RPI) included

    • plague69 on 09/07/2023 - 18:36

      Buy an orange pi 3 lts. I have 2 of them and runs like a champ

      Edit: as above says, no additional pi needed for these kits

  • khosrua on 09/07/2023 - 19:00

    Is this a once-off or regular/ongoing?

    • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 20:30

      Regularly, But as stated its a perorder type of thing as the captial to tie up in a voron kit is too much,

      everytime I have a filament order coming in voron preorders will be open!

      • khosrua on 10/07/2023 - 19:02

        Time to start tuning my ABS profile i guess

  • cplagz on 09/07/2023 - 19:06

    That's a cracking price on Voron kits. When will you be adding the Voron printed parts to website? And will you offer options for CF infused? Asa/abs/PC for the parts?

    • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 20:30
      +1

      Once Im back around August 10th as I fly out tomorrow morning, If I can get renders of finished parts done while on holidays ill update the site

  • RADICALIST on 09/07/2023 - 19:33

    Will you be able to order Troodon 2.0?

    • AssociatedSidddd @ Siddament (Previously P3D) on 09/07/2023 - 20:31

      I should be able to but for this one its only going to be thier voron kits

  • mathew42 on 09/07/2023 - 22:07

    Price of filament seems cheap when it starts at $16.99/kg.
    What is the quality like?

    • DmytroP on 09/07/2023 - 22:33

      I tried a few (PLA, CF-PLA and CF-PETG), very happy with the quality, will buy more.

  • SickDmith on 10/07/2023 - 10:34

    Are these filament prices regular or some pre-order special?

    • AssociatedSidddd @ Siddament (Previously P3D) on 10/07/2023 - 11:53

      Always consistent non changing prices

  • arzach on 19/07/2023 - 20:47

    Have been wanting to do a Voron for a while. Definitely keen to get on the next order, if you do another one.

Login or Join to leave a comment
Login Join