• expired

Dreame H12 Pro Wet & Dry Vacuum Cleaner $399 Delivered @ MyDeal

80
Dreame H12 Pro Wet & Dry Vacuum Cleaner $399 Delivered @ MyDealAffiliate
Go to Deal
Cashback
littlesoldier on 16/06/2025 - 13:48 mydeal.com.au (420 clicks)
Last edited 17/06/2025 - 09:35 by 1 other user
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Combine with 19% Cashback from shopback (cap $36) to get it down to $363
If you have 15% BankBonus from shopback (cap $20), bring it further down to $343

Dreame H12 PRO Cordless Wet Dry Vacuum Cleaner, Hot Air Drying, Self-Cleaning, Dual-Sided Edge Cleaning, Smart Messes Detection, 35min Long Runtime, Smart Floor Washer for Hard Floors

Electrical & Electronics Dreame Electric Mop Vacuum Cleaner

Related Stores

MyDeal.com.au
MyDeal.com.au
Marketplace

closed Comments

  • punkman on 16/06/2025 - 14:07

    Haha. Bought all for $349 on the Amazon deal then try flog off here for $50 more

  • JumpingUnicorns on 16/06/2025 - 14:10

    How do these go? My Dyson V8 is hopeless now so looking to upgrade during EOFY

    • blueboy410 on 16/06/2025 - 14:19

      IMO, you cant compare this with dyson v8. This is wet and dry vacuum, the dyson version will be Dyson WashG

    • Vincero on 16/06/2025 - 14:59
      +1

      Same boat here. Dyson v8 battery is dying and the run time is so short that I can’t get anything done.

      Looking for another stick vacuum for hard wood floor and car clean, but don’t want to pay premium for the new AI inflated feature. Just need something that clean and with decent run time

  • MattBrisSyd on 16/06/2025 - 16:02

    Is the Tineco iFLOOR 5 the same thing as this? if not, which one should I get (I was already set on the Tineco but it might just be discovery bias)

    • littlesoldier on 16/06/2025 - 16:10
      +1

      Kind of the same thing, but Dreame H12 Pro has dual-side edge cleaning and hot air drying
      iFloor 5 only has single side edge cleaning, and only spin drying

    • preemo on 16/06/2025 - 16:11
      +1

      This is a totally different brand. I have the Tineco iFLOOR 5, and it's fantastic. Highly recommend getting it. I believe Tineco just do these types of floor mops, so probably have better R&D.

  • bonus999 on 16/06/2025 - 16:17
    +2

    Personal advise choose Tineco over Dreame on Wet & Dry Vacuum Cleaner. (Having such a hard time with them before, battery is the major issue)

    Recommended to visit https://www.productreview.com.au review and have some insight.

    • littlesoldier on 16/06/2025 - 16:34

      TBH I dont treat productreview too seriously because most people tend to only report when they lodge a complain

      eg. the last hardfloor mop I used is a Bissell Crosswave Pet multi surface 2225f, which only has a rating of 3.2 https://www.productreview.com.au/listings/bissell-crosswave-…
      but amazon does have 4.3 https://www.amazon.com.au/BISSELL-Crosswave-Vacuum-Cleaner-G…

      For me, I have been using the same machine over 5 years and never have an issue

      Just recently changed to Dreame H12 Pro mainly wants the edge-to-edge cleaning, and getting a battery one for better flexibility
      it seems most of these mops major complains are either water leaks, short battery life or machine no longer works, and experience can varies based on usage and maintenance

    • WazzaP on 16/06/2025 - 17:09

      Tineco have their own battery and charging issues too, and pretty poor after sales service. Quite a few people in Aus reporting that tineco have no local service/repair center and their chosen remedy in a lot of cases seems to be offering an insultingly low trade in price to upgrade to a different model tineco, despite the original one still being under warranty and having failed in <2yrs. We're talking $50 off for a 2yr old device that you paid $600-$800 for originally.
      A lot of the problems seem to be with the charging, will charge for a few seconds then cut off. Only way to get it to charge is to babysit it and take it off/place it back on the charging dock many times until it finally decides to keep charging. In my case, despite doing this I could usually get it to charge but couldn't get it to self clean the roller - mine was a combo unit that could be used as a hand-held vac, or clipped into the main unit to use as a wet mop/vac, when trying to self clean it would think the vac body wasn't installed.

  • NutnButAPnut on 17/06/2025 - 09:31

    Can pick it up for 280 now (after cashback) using topcashback 30% thru wollies everyday market

    • littlesoldier on 17/06/2025 - 09:35

      yea, i just ordered one and returning the one from Amazon :)

    • sn0w on 17/06/2025 - 14:08

      Thank you, jumped on this as well (before the cashback deal finished at 2pm), hope it tracks without problem.

  • irmalik on 23/06/2025 - 13:52
    -1

    I got this from amazon and on first use it gave error of "fill clean water tank" (ofcourse it was full with clean water). I returned and used this deal to order from mydeals and guess what, same issue. I have opened a service request with dreame. Anyone had this issue?

    • Ughhh on 23/06/2025 - 14:01

      I have this wet Vac, had it for maybe close to 6months. No issue

      • irmalik on 23/06/2025 - 14:12

        I may have got bad batch twice

        • Ughhh on 23/06/2025 - 14:13
          +1

          Could be a connection issue? Check all the plastic wraps are removed.

          • irmalik on 23/06/2025 - 14:14

            @Ughhh: I am sure I did check but will check again

          • irmalik on 23/06/2025 - 14:18

            @Ughhh: Check, there is no wrap or blockage between tank connectors and vaccum

        • littlesoldier on 23/06/2025 - 14:14

          I got the same problem and found that its because the clean water tank is not truely full
          once i fill it truely full (up to the top cap) the error is gone

          • irmalik on 23/06/2025 - 14:14

            @littlesoldier: I will do that now

          • irmalik on 23/06/2025 - 14:17

            @littlesoldier: Just tried, still same error. "Fill clean water tank"

            • littlesoldier on 23/06/2025 - 14:21

              @irmalik: try fill the clean water tank to full again
              then press the bottom valve with finger of the clean water tank, water should start coming out from the bottom
              then flip upside down, there's a small hole near the top where water will come out as well

              After done the above, fill the water tank full again
              then put back to the machine and try on Auto mode

              • irmalik on 23/06/2025 - 15:01

                @littlesoldier: I tried all the steps, this time the error came back after a minute and also the roller never got wet.

        • nikoris on 23/06/2025 - 20:06

          Sounds like user error. Try again

Login or Join to leave a comment
Login Join