NotForYou91 » user profile

Member Since 28/02/2015
Last Seen 49 min 20 sec
Location Australia

Recent Activities

Anyone tried this with their OnePass linked to FlyBuys and been able to use FlyBuys points or do you need to specifically use FlyBuys card?
25/08/2025 - 09:56
Greatly appreciate this guide, thanks so much. Will give it a go when the dongle arrives. Thanks!
23/09/2024 - 09:14
How did you do this? Did please and thank you in advance for instructions :)
22/09/2024 - 23:15
I am very new to this but have a stack of smart home devices from a range of different manufacturers. Do I need the dongle as well to get…
19/09/2024 - 12:09
Thanks so much for your response and time taken. Really appreciate it!
30/06/2024 - 21:54
Any recommendations for a UniFi compatible switch? Bought the UDM pro but need a couple more POEs. Will the Lite 16 suffice? To power 2 x…
28/06/2024 - 22:43
My pleasure - I don't usually comment on things but I genuinely enjoy using this treadmill and recommend it. The quality is a tonne better…
13/01/2021 - 22:32
Relatively easy actually, much easier than getting it out of the box to be honest. Some issues around tight cornering but I was able to…
13/01/2021 - 18:54
I got one of these during the Black Friday sales. Interface is relatively straightforward to figure out when you realise that there’s a…
13/01/2021 - 17:55
Does it have incline and is it auto or manual? It just says 10 levels on the website. Thanks! :)
10/09/2020 - 10:04
https://launchparty.roborockstore.com.au/130556/11171926
02/09/2020 - 06:28
Wonder if Manny's will jump on board - been eyeing off a guitar worth a couple of grand and would definitely pull the pin if they did!
31/03/2020 - 10:35
Does anyone know how this compares with the 360 S7 or Roborock S6?
11/12/2019 - 12:10
Is it easy enough to DIY? I see theres one in stock locally and I have been wanting to upgrade the Mitsubishi MMCS in my ZJ Outlander.
24/12/2018 - 15:08
If anyone is able to assist here and able to PM me I'd be greatly appreciative. As always, please and thank you! EDIT: Scrap that, just…
25/09/2018 - 22:15
[@scud70](/comment/5412898/redir)Thanks Scud for the info! I've got a similar router but couldn't find that info in your instructions.…
14/12/2017 - 14:38
The screen is glitching after being re-opened? That means that either 1) The ribbon cable has been caught/crimped slightly upon them…
22/06/2017 - 20:10
Spoke with a Harvey Norman rep - they sent me a "special link" to pricematch. Don't have an OW locally (around 50km to nearest). Just…
23/05/2017 - 18:06
NotForYou91 joined OzBargain.
Welcome aboard!
28/02/2015 - 12:39