trestylez » user profile

Member Since 21/01/2016
Last Seen 13 hours 41 min
Location Sydney

Recent Activities

brateck LDT43-C011 with Brateck Lumi LCD-201R adapter plate. * may require some extra screws to work with the female vesa hole depth.
07/06/2022 - 00:56
brateck LDT43-C011 with Brateck Lumi LCD-201R adapter plate. * may require some extra screws to work with the female vesa hole depth.
07/06/2022 - 00:55
120x70 cm desk here with this monitor and doing just fine! Have it mounted on a arm towards the back of desk. I never have my applications...
06/06/2022 - 17:54
"This is the reason why most computer monitors are not OLED" Have you not seen how many OLED monitors are being released in 2022? If you...
06/06/2022 - 17:44
Are you on the latest firmware? Mine stopped this after updating.
01/04/2022 - 14:58
Latest firmware does not have this issue. 2000+ hours as a monitor and enjoying it. Just keep in mind the quirks of brightness limiter and...
01/04/2022 - 14:58
I had display port blanking on mine when running [email protected] with the provided cable that went away with a new correctly rated cable. 600...
27/11/2021 - 17:12
Cheaper here if you signup for the new user 15% off it should be $2,189.60 with free shipping....
21/10/2021 - 01:26
Further discount available on the edu and partner samsung store. $50-100 off (need to add to cart).
14/10/2021 - 13:55
The mech posted was for the Serati and not the fern. Donati would not publicly sell a design made for another large company and they are...
20/09/2021 - 12:52
The Serati mechanism seems to be made by Donati, this is the mech i'm...
17/08/2021 - 16:36
I recently purchased a Serati chair with arms and headrest and i'm very happy with it. I was about to buy a steelcase but due to slow lead...
17/08/2021 - 14:27
I was looking for the details, might want to link this "save 20% off on...
25/06/2021 - 22:24
For memory i just use Dram calculators memtest under MEMbench which is a front end to the provided HCI memtest.
27/01/2021 - 21:16
"If you go backwards with higher frequencies then you're most likely unstable." I was referring specially to Ryzen and may not have been...
27/01/2021 - 19:39
I bought 3 of these 4400Mhz patriot Viper kits and 2x 4133Mhz kits and all were bdie. Although its pretty common for the chips to change...
27/01/2021 - 19:01
Download "DRAM Calculator for Ryzen". Choose memory type as Samsung B-die (99% sure the 4400Mhz will be bdie) and fill out your required...
27/01/2021 - 14:50
It was selling $1 cheaper yesterday....
01/01/2021 - 17:36
Not for Intel which OP seems to be using but on Ryzen here are some benchies....
28/12/2020 - 16:47
trestylez was awarded a badge.
12/12/2020 - 10:36
Same for Sydney. Postage kills a lot of the deals on Newegg lately.
10/11/2020 - 23:12
You also need to understand the no1 reason for failures and noise in having a pump at the top of a loop. See
08/11/2020 - 20:18
Everyone's requirements are going to be different and i'll keep this short. Processor upgrade doesn't mean much too me. Unless algorithms...
31/08/2020 - 10:55 I went the 65 BX and saved a few $$$.
30/08/2020 - 23:49
This is not WQHD curved, should be WFHD.
10/06/2020 - 15:59
Many variables to consider but on higher end CPU's i.e 3900x with all threads loaded, liquid cooling had worse performance and was louder...
05/06/2020 - 11:58
Another alternative is the discontinued Deepcool Assassin II, particularly good on ryzens. There still seems to be a bit of stock floating...
05/06/2020 - 10:55