3dprintdeals » user profile

It's not exactly difficult to dry. What temp are you drying it at and for how long. Drying it thoroughly will usually get rid of most…

Most of mine have been via Auspost

It's not that hard with modern printers. He has the ACE dryer to dry it out first.

Nice spot, did you just find it by browsing since it's not on the sale page.

I have base and this expansion but yet to play it...

Nice, good option for VIC with C&C

Next is probably the Creality listing, but it's o/s. https://www.ebay.com.au/itm/236077179363

Yeah the jayo/sunlu spools work fine in AMS2 For AMS Lite, that's where you would just need to print an adapter. Sunlu is in process of…

Yes, you can dry them in AMS2 no problem. Food dehydrator will work fine as well, just get it to temp.

Jacked...

I do it all the time on my A1/AMS Lite. Some models it doesn't make sense but for large flat areas of support it works well, and it only…

nice, updated

they seem to have the combos in stock but the individual listing is still o/s..…

Nice, I thought about the AMS Lite enclosures but figured I might as well just get a dryer and feed from there. The AMS lite is stripped…

Yeah, all depends on your environment and how much you're printing, I've left filament out for weeks on AMS lite and no real issue.

for most cases it should be fine. Put it back in the bag if you know you won't be using it for a while. I've had some PLA go brittle but…

what was your total price with the 2x 5kwh inverters? Do you have 30kw or 50kw of batteries?

one of the benefits of a coreXY form factor, and this one being even more compact with the 220mm3 bed size.

You need a Zigbee stick - Sonoff Zigbee USB Dongle 3.0 - new favourite: SMLIGHT SLZB-06M Check Aliexpress

nice, you could add the enclosure kit to add some noise dampening. Loud fans are one of the common cost saving measures on budget printers.…

Yeah, the purge waste is a huge factor when it comes to multi-colour prints but you don't have to print those if you don't want. - Many…

The motors are in the hub so you could also just feed directly from drybox like Creality Space Pi or Sunlu S4 if you have some…

Give Scaniverse, Polycam or KIRI engine a go for scanning with your iPhone.

pretty much, Next is probably A1 Mini Combo $579 but it's a bed slinger and smaller 180mm3 print bed. A1 Combo Creality Hi CFS Anycubic…

Yeah, there's Kobra 3 Max which replaces the 2 Max but same bed size of 420x420x500

Typical large scale printers like Prusa XL, Bambu H2D & Creality K2 Max the are around 350x350x350 size. For 500x500x500, you'd be looking…

The Flashforge AD5X released back in June, an addition to their popular budget CoreXY printer lineup is again available at a discounted…

Interesting, using the light pulse on the meter

Any product suggestions?

wow that's some baby tax! Just get a [Tapo C210](https://www.ozbargain.com.au/search/node/tapo%20c210%20type%3Aozbdeal), works great as…